Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Kitchen Remodeling: The The Hammocks Owner’s Guide
Kohler-compatible kitchen remodeling in The Hammocks runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and whether plumbing and electrical move. Most of our Kohler kitchen work is planned over one to three days of design review before a single box is opened, and the install itself takes one to three weeks. Kohler products don’t fail like a tire goes flat. Homeowners in The Hammocks usually discover the problem slowly: a pull-out sprayer that dribbles at the head, a soft-close drawer that stopped closing softly six months ago, a sink basin that flexes under the faucet, or a faucet cartridge that needs a quarter-turn more each month to shut off. What sounds like a small annoyance is usually a part wearing out on a schedule, and knowing which part saves you from replacing things that are still fine.
Which Kohler Models This Applies To
Kohler kitchen products split into a few families worth knowing. Faucets fall into the Bellera, Graze, Malleco, Purist, Artifacts, and Coralais lines, and each uses a different cartridge or valve body. Sinks range from the Whitehaven apron-front cast iron to Strive and Vault stainless undermounts. Cabinet hardware and organizers live under Kohler’s storage lines, and the pull-out sprayers, soap dispensers, and drain assemblies each have their own part numbers. The first thing to check is the label under the sink or on the inside of the faucet shank. Kohler prints the model number on a sticker there, and on older installs the number may be under the escutcheon plate or on the supply line tag.
Here’s the compatibility gotcha most homeowners miss: Kohler changed cartridge designs across generations without changing the outside look of the faucet. A 2016 Bellera and a 2021 Bellera can look identical on the counter and take completely different cartridges. Buying the wrong one is the single most common reason a Kohler kitchen fix gets done twice. The same holds for Whitehaven sink strainers, which come in specific drain sizes that don’t match generic hardware-store replacements.
On OEM versus aftermarket: for a cast iron Whitehaven sink or a Purist faucet, buy the Kohler OEM part. Aftermarket cartridges and sprayers fit “close enough” and then leak within a year. For non-critical items like a soap dispenser pump or a cabinet bumper, a quality aftermarket equivalent is fine. Groundwork Construction Co. of The Hammocks is an independent service provider, not affiliated with Kohler.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Kitchen Remodeling Is Failing
These are the symptoms our technicians see most often in The Hammocks kitchens, and what’s actually happening underneath.
- Faucet drips after you shut it off. The cartridge seals are worn, not the whole faucet. Replacing the cartridge fixes it; replacing the faucet is usually overkill.
- Pull-out sprayer head leaks or won’t retract. The sprayer’s internal check valve or the hose weight has failed. In South Florida humidity, the rubber hose also gets stiff and brittle faster than in drier climates.
- Soft-close drawer or door no longer closes softly. The damper in the hinge or slide has worn out. This is a $10 – $40 part per unit, but matching the exact hinge series matters.
- Sink strainer or basket leaks at the base. The rubber gasket has hardened and shrunk from heat cycling under the sink, common in The Hammocks kitchens where the dishwasher and disposal share the cabinet.
- Soap dispenser pump won’t prime or squirts unevenly. The pump mechanism or the dip tube has clogged or cracked. Simple replacement, but the thread size has to match.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Kohler kitchen remodeling in The Hammocks falls into these ranges, and every quote is written line by line so you see parts and labor separately:
- Full kitchen remodel with Kohler fixtures: $14,000 – $45,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What drives you toward the top of the range: moving the sink or plumbing, upgrading to a Whitehaven cast iron sink, swapping to a Purist or Artifacts faucet, or adding an island. What keeps you near the bottom: keeping the current footprint, reusing the existing Kohler sink, and replacing only the failed faucet or hardware.
Here’s the parts-plus-labor reality most contractors won’t show you. A Kohler replacement cartridge runs $20 – $45 for the part, and the labor to swap it is a service-call line on the quote. A full Kohler faucet replacement (faucet plus install) is a separate line. We show you both, so you can decide whether to repair or replace. All work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
DIY or Call Us?
Some Kohler kitchen checks are safe to do yourself. Measuring the sink opening, reading the model label, checking that the water supply valves turn freely, and tightening a loose cabinet hinge screw are all fine. Snapping a photo of the model number and looking up the part diagram is genuinely useful.
Where DIY goes wrong: replacing a faucet cartridge requires shutting off the water, removing the handle, pulling the retaining clip without scratching the chrome, and seating the new cartridge so it doesn’t leak. The most common mistakes we see in The Hammocks are cross-threaded supply connections, a cartridge seated backwards, and a shutoff valve that snaps off in the wall because it was never touched in ten years. That last one turns a $40 fix into a drywall and plumbing repair. When the shutoff doesn’t budge, that’s when you call.
Call (844) 761-9356 and we’ll schedule your free estimate. A live person answers 24/7, and our background-checked, uniformed technicians arrive with the right part for your Kohler model.
FAQs
Seven to twelve years is typical in South Florida. The Hammocks’ hard water and year-round humidity speed up mineral buildup and seal hardening compared to drier climates, so cartridges here often fail closer to the seven-year mark.
Often yes. A dripping Kohler faucet is usually a cartridge or seal swap, not a new faucet. A leaking Whitehaven sink strainer is a gasket replacement. We quote the repair first and only recommend full replacement when the valve body itself is scored or cracked.
A cartridge replacement takes 30 – 60 minutes. A full faucet replacement takes one to two hours. A sink strainer or sprayer swap is typically under 45 minutes. Most single-part Kohler jobs in The Hammocks are completed in a single visit.
We order the Kohler OEM part by the exact model number printed on your faucet or sink label, and we confirm the fit before the technician arrives. If a quality aftermarket equivalent makes sense for a non-critical item, we tell you and price both options on the written estimate.
Ready to stop the drip? Call (844) 761-9356 for a free estimate. We offer $1,000 off projects over $10,000, 0% financing for 18 months, and upfront pricing – the number you see is the number you pay. Our technicians have up to 12 years of experience, and the 730-Day Done Right Promise backs every job.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.