Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Bathroom Remodeling: The The Hammocks Owner’s Guide
Jerith-compatible bathroom remodeling work in The Hammocks typically runs $9,000 to $28,000 installed, and most jobs are scoped within a single visit once the right parts and panels are matched to your model. When a Jerith component fails – a cracked vanity top, a failed shower surround seam, a tub-to-shower conversion that never sealed right – you usually find out the same way every The Hammocks owner does: a soft spot under the cabinet, a hairline crack spreading across the resin, or water tracking behind the wall panel after a shower. The part rarely announces itself. It just stops doing its job.
If that sounds familiar, call Groundwork Construction Co. of The Hammocks at (844) 761-9356. A live person answers around the clock, and we’ll get you a free estimate with the exact part and price spelled out.
Which Jerith Models This Applies To
Jerith makes bathroom fixtures in a few distinct lines, and the part you need depends on which one you have. Their vanity tops and shower surrounds come in standard and custom widths, and the difference between a 48-inch and a 60-inch panel isn’t cosmetic – it’s the difference between a part that fits and one that doesn’t. Before you order anything, find the model label. It’s usually on the underside of the vanity top or behind the access panel on a surround. If the label is gone, measure the fixture opening at its widest point and note the drain or faucet spacing.
The OEM-versus-aftermarket decision matters here. Jerith’s own replacement parts carry the exact spec, but they can take longer to source, and for older discontinued lines they may no longer be made. A quality aftermarket equivalent – matched on dimensions, material, and mounting pattern – is often the smarter call, especially when the original line is out of production. We confirm fitment before we order, so you’re not paying for a part that shows up wrong. We work with KraftMaid, Cambria, and Silestone on the surrounding cabinetry and surfaces when a full refresh makes more sense than a single-part swap.
One thing worth knowing: Groundwork Construction Co. of The Hammocks is an independent service provider. We’re not affiliated with Jerith, but we know their product lines well enough to match the right part to your fixture the first time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Bathroom Remodeling Is Failing
- Hairline cracks spreading across the resin or gel coat. This usually means the substrate has flexed over time, often from a floor that wasn’t perfectly level when the unit went in. Left alone, the crack reaches the core and the part is done.
- Soft or spongy spots under the vanity or shower base. Water has gotten behind the finish and into the substrate. In The Hammocks humidity, that moisture doesn’t dry out – it keeps working.
- Caulk lines that keep failing no matter how often you redo them. A seam that won’t hold is usually a sign the panel has shifted or the wall behind it has moved. Recaulking hides it for a few weeks, then it’s back.
- Discoloration or a chalky film that won’t scrub off. The gel coat has worn through. Once the surface layer is gone, the material underneath stains and pits, and no cleaner brings it back.
- Loose fittings, a wobbling faucet base, or a drain that won’t seat. The mounting points have degraded. This is often the earliest warning and the cheapest to fix – if you catch it before water gets behind the wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In The Hammocks, a Jerith-compatible bathroom remodel runs $9,000 to $28,000 installed. A smaller job – a single vanity top and surround refresh – sits at the low end, around $5,000 to $12,000. A walk-in shower installation runs $4,500 to $12,000, a tub-to-shower conversion $3,500 to $10,000, and a straight shower replacement $3,000 to $8,500. A vanity installation on its own is $800 to $3,000.
What moves you up or down the range: the size and series of the Jerith part, whether the wall or floor behind it needs repair, and whether you’re keeping the existing layout. We give you a written line-item quote – part, labor, and any substrate work – before we start. No-hassle upfront pricing means the number you see is the number you pay. Every job is covered by our 730-Day Done Right Promise, and projects over $10,000 get $1,000 off, with 0% financing for 18 months available.
DIY or Call Us?
There’s a safe middle ground. You can check the model label, measure the opening, inspect caulk lines, and test for soft spots with a screwdriver handle. That’s diagnostics, and it costs nothing.
What goes wrong on a DIY Jerith swap is almost always the same: the old unit comes out, the substrate behind it is wet or out of level, and the new panel goes in over a problem that hasn’t been fixed. It looks fine for a season. Then the seam fails again, and now you’ve paid for the part twice. Pulling a bonded surround or vanity top without damaging the wall behind it is also harder than it looks.
Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform. Call (844) 761-9356 for a free estimate and we’ll tell you honestly whether you need a full swap or a repair.
FAQs
A well-installed Jerith unit typically lasts 15 to 25 years, but South Florida humidity and The Hammocks’ afternoon storms shorten that if the seal behind the panel is compromised. The part itself is durable; the failure is almost always at the seam or the substrate, not the material.
Sometimes. A surface crack or a worn caulk line can be repaired if the substrate is sound. Once water has gotten behind the panel or the gel coat is gone, replacement is the only fix that lasts. We’ll tell you which one you’re looking at during the free estimate.
Most single-part swaps – a vanity top, a surround panel, a shower base – are completed in a single visit. A full tub-to-shower conversion or a walk-in shower installation usually takes two to three days depending on substrate condition and any plumbing changes.
We match your Jerith model number to the correct OEM replacement or a verified aftermarket equivalent, confirm fitment before ordering, and handle the sourcing for you. You don’t chase down a discontinued part – we do.
Call Groundwork Construction Co. of The Hammocks at (844) 761-9356 for a free estimate. Live person, 24/7. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.