Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Windows & Doors: The The Hammocks Owner’s Guide
We install IKO-compatible windows and doors across The Hammocks, with most full window replacement projects running $4,500 – $15,000 and impact-rated units at $8,000 – $25,000 installed. Most jobs are completed in a single visit once the correct part is matched to your unit. Homeowners here usually find out something’s wrong the same way: a door that suddenly needs a shoulder to close, a window that fogs between the panes after a rainy season, or a crank that spins freely in August heat with the glass shut tight.
Which IKO Models This Applies To
IKO manufactures both windows and doors, and the part that failed depends entirely on which line you have. IKO’s window systems generally fall into single-hung, slider, and casement configurations; their door lines include hinged entry and sliding patio units. Before you order anything, find the etching on the lower corner of the glass or the label inside the frame channel. That label tells you the series, the glass make-up, and the manufacture date, and it’s the only reliable way to match hardware, weatherstripping, and glass packs to the right unit.
Here’s where IKO gets tricky: hardware from one IKO series rarely drops into another without modification. Rollers, sash balances, and lock mechanisms are engineered to specific extrusion profiles, so a part that fits a 2015-era IKO slider won’t necessarily seat in a 2020 model. That’s the compatibility gotcha most homeowners hit after ordering online.
The OEM-versus-aftermarket call comes down to two things. For structural and glass components, we source OEM-equivalent parts that meet the original spec, because aftermarket glass packs often fall short on impact rating and Florida Product Approval. For wear items like rollers, sweeps, and weatherstripping, quality aftermarket equivalents hold up just as well and save money. Groundwork Construction Co. of The Hammocks is an independent service provider and is not affiliated with IKO; we install and service IKO-compatible products using sourced parts matched to your unit’s label data.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Windows & Doors Is Failing
South Florida’s humidity and summer heat cycles put unique stress on window and door components. Here’s what typically signals the end of a part’s useful life:
- Fogging or condensation between panes. This means the sealed glass unit’s desiccant has saturated and the seal has broken. No amount of wiping helps. The insulating gas has escaped, and the glass pack needs replacement.
- Difficulty opening or closing. Rollers, hinges, or slide tracks wear down or collect grit from our sandy air. When the door drags or a window fights you, the mechanism is the culprit, not the frame.
- Water intrusion at the sill or jamb. Failed weatherstripping, sweeps, or caulk lines let The Hammocks’ heavy summer rain in. If you’re seeing damp drywall or a wet track after storms, address it before it spreads to framing.
- A door that won’t latch or lock. Strike plates shift as a door settles, and lock hardware wears. If the handle turns but the deadbolt doesn’t throw cleanly, the lock or the alignment is off.
- Visible cracks in the glass or frame. Impact-rated units can crack from a strike or from thermal stress; frame cracks typically mean the extrusion has failed. Either case calls for replacement, not patching.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Window and door work in The Hammocks lands in predictable ranges depending on scope and product tier. Here’s what we see:
- Window replacement (non-impact or standard): $4,500 – $15,000 for a typical home, depending on unit count and size.
- Impact window installation: $8,000 – $25,000, driven by glass rating, frame material, and number of openings.
Door replacement and hardware swaps (rollers, locks, sweeps, balances) run lower and are often completed in a single visit. What drives the range: number of openings, whether you’re choosing impact-rated glass, frame material (vinyl, aluminum, wood-clad), and any structural reframing needed.
Every estimate from Groundwork is line-itemed. Part cost, labor, disposal, and permit fees (where applicable) are separated so you see exactly where the money goes. No change orders mid-job. All work is covered by our 730-Day Done Right Promise. And for projects over $10,000, $1,000 off applies – paired with 0% financing for 18 months. Call (844) 761-9356 to schedule your free estimate.
DIY or Call Us?
Some checks are safe and smart. You can inspect weatherstripping for gaps, clean tracks and rollers with a brush, tighten visible hinge screws, and read your unit’s glass label to know exactly what you have. Easy stuff, low risk.
Where DIY goes wrong: replacing a sealed glass unit or swapping an impact-rated glass pack is not a weekend project. Impact glass carries a Florida Product Approval tied to the whole assembly, and an improperly installed unit voids that rating. Lifting and setting a large window or door sash yourself risks injury and water intrusion if the seal isn’t set correctly. And on any door or window that’s part of your home’s opening protection, mistakes get expensive fast.
We’ve seen plenty of The Hammocks homeowners try a $40 online part and end up paying twice. Call (844) 761-9356 and we’ll tell you honestly whether it’s a swap or a replacement. Estimates are free and upfront.
FAQs
Quality IKO units typically last 20 – 30 years in South Florida, but heat and humidity shorten component life. Sealed glass packs often need replacement at 10 – 15 years; rollers, weatherstripping, and sweeps wear faster, sometimes within 5 – 8 years of daily use. Call (844) 761-9356 if yours are showing their age – a free estimate will tell you whether you’re repairing or replacing.
Often yes. Fogged glass, failed rollers, worn weatherstripping, broken locks, and damaged screens are all repairable on their own. Full frame replacement is only necessary when the extrusion is cracked, the sill has rotted, or the opening can’t be sealed properly. We diagnose that before quoting.
A single hardware or glass pack swap usually takes one visit, often under two hours. Full window or door replacement depends on unit count and scope, but most residential jobs finish in one to two days. We’ll give you a realistic timeline in the estimate, not the morning of.
We identify your IKO unit from the glass label or frame marking, then match the part to that specific series and spec. For structural or impact-rated components, we source OEM-equivalent parts that meet the original spec and Florida Product Approval requirements. For wear items, we source quality aftermarket equivalents. No parts are carried on a truck; everything is ordered to your unit. Call (844) 761-9356 to get the process started with a free estimate. We also work with KraftMaid, Cambria, and Silestone on related projects.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.