Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Kitchen Remodeling: The The Hammocks Owner’s Guide
Dvele kitchen remodeling in The Hammocks covers cabinet, countertop, backsplash, island and full-kitchen installation work, and most projects here land between $14,000 and $45,000 installed. Smaller jobs like a cabinet refresh or countertop swap run $4,000 – $6,500. We’re an independent builder, not affiliated with Dvele, and we match Dvele-spec materials and finishes to your existing kitchen so the new work looks like it was always there.
Owners usually call us after a failed part shows itself the slow way: a cabinet door that won’t sit flush, a drawer that drags on one corner, a countertop edge lifting at the seam, or a backsplash tile that’s loosened and now flexes under a thumb. In The Hammocks, that last one shows up a lot because the humidity works on adhesive and grout long before it touches the cabinets themselves.
Which Dvele Models This Applies To
Dvele builds its kitchens around its own cabinet and panel specs, so “Dvele-compatible” isn’t a single part number. What you’re matching is the box dimensions, door and drawer face profile, hinge and slide type, and the panel finish. Pull a door and look at the sticker on the inside face of the cabinet box or the hinge plate; that label carries the series and finish code you need. Door widths are the other number that matters. Measure face-frame opening width and the existing door thickness in millimeters (Dvele’s panels commonly run in metric stock), because a door bought to the nearest inch will bind. If the label is gone, measure the opening, the slide rail spacing on drawers, and photograph the profile and finish sample together.
On the OEM-versus-aftermarket question for Dvele specifically: OEM panels and slides are the safe fit, but they often mean a wait while the part is produced and shipped. A quality equivalent from a matching-metric line will usually drop into a Dvele box, provided you match hinge cup bore, slide rail length, and finish sheen. Where we draw the line is mixing a metric cabinet box with a slide designed for a different rail spacing. It fits on day one and sags by month eighteen. Every installation we do is backed by our 730-Day Done Right Promise, so the fit has to hold.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Kitchen Remodeling Is Failing
- Door won’t stay flush or rubs the frame. The hinge has lost tension or the screw holes in the box have wallowed out. In The Hammocks humidity, wood boxes swell and shrink and screws loosen faster than the hinge itself wears.
- Drawer drags or won’t close flush. The slide is out of alignment or a rail screw has backed out. Dvele drawer boxes are light and the slides carry more of the load than owners expect, so one loose screw creates a visible drag.
- Countertop seam lifting or edge separating. Adhesive or the stone edge has let go. This is a moisture-and-heat cycle failure, and The Hammocks sun through west-facing kitchen windows speeds it up.
- Backsplash tile flexes or grout cracks in a line. The tile has lost bond to the substrate. Flexing under finger pressure means it’s ready to come off, not just cosmetic.
- Cabinet face panel or finish peeling at the bottom. Water has wicked up from the floor line or down from a sink drip. This is the one Dvele owners miss longest, because it starts behind the toe kick.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in The Hammocks runs $14,000 – $45,000 for a full kitchen remodel, $9,000 – $20,000 for a small kitchen, $4,000 – $13,000 for cabinet installation, $2,000 – $6,500 for a countertop, $800 – $2,500 for a backsplash, and $3,000 – $10,000 for an island. What pushes you up the range: cabinet count and whether boxes are replaced or refaced, stone versus quartz or Silestone, and how much backsplash needs re-bonding versus just re-grouting. What keeps you down: keeping the existing layout and plumbing, and reusing Dvele boxes that are still sound.
Every quote is a written line-item number, parts and labor broken out. The number you see is the number you pay, and the work carries the 730-Day Done Right Promise. We also run 0% financing for 18 months and $1,000 off projects over $10,000.
DIY or Call Us?
Some of this you can safely check yourself. Pull a drawer and confirm the slide type. Wipe a countertop seam and look for a hairline gap. Press a backsplash tile gently; if it moves, don’t touch it again. What you shouldn’t do is chase a lifting stone seam with caulk and hope, or pry a flexing tile off a wet substrate, because both turn a small fix into a substrate repair. A countertop that’s separating has weight and can come down hard, and cabinet boxes are heavier than they look.
Our technicians have up to 12 years of experience matching Dvele-spec parts, and calls get answered by a live person 24/7. Call (844) 761-9356 and we’ll walk you through what you’re seeing before anyone comes out.
FAQs
Cabinet boxes and slides should give you 15 – 20 years with normal use, and stone countertops should outlast the cabinets. In The Hammocks, the coast humidity pulls that toward the shorter end unless a failing slide or a sink drip gets fixed early. Call (844) 761-9356 for an exact quote; estimates are free.
Often yes. A single loosened hinge, one dragging slide, or a backsplash tile losing bond can be repaired without replacing the run. Once a Dvele box has swelled or a stone seam has lifted fully, replacement is usually the honest call. We’ll tell you which side you’re on before you spend anything.
A single door or slide swap is an hour or two, a backsplash re-bond is a few days, and a full cabinet or countertop installation runs several days depending on scope. We schedule to your kitchen’s downtime and confirm the timeline in the written quote. Call (844) 761-9356 to lock in your free estimate.
From your cabinet or hinge label specs and physical measurements, then cross-checked against our vetted material lines. We also work with KraftMaid, Cambria and Silestone where the finish or stone needs a matching equivalent. We don’t stock parts and don’t carry them on a truck; we order to your kitchen. Estimates are free.
If your Dvele kitchen has a failing door, slide, seam or backsplash, don’t wait for it to spread. Call Groundwork Construction Co. of The Hammocks at (844) 761-9356 for a free estimate and design consult. One independent team from first measurement to final walkthrough, upfront pricing, and the 730-Day Done Right Promise behind the work.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.