Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Fence Installation: The The Hammocks Owner’s Guide
Fence installation for a Dvele property in The Hammocks typically runs $3,500 – $9,000 installed, and most residential jobs are completed in a single visit. We’re an independent contractor, not affiliated with Dvele, and we source and set Dvele-compatible fencing systems sized for South Florida lots.
Owners usually find us after the same set of problems: a gate that drags on the ground or won’t latch, posts that start leaning after a wet season, or a run of fence that pulls loose from its concrete footing during a heavy summer storm. In The Hammocks, where homes sit on lots with post-and-rail, vinyl, and aluminum runs exposed to full afternoon sun and standing water from tropical rain, the wear shows up faster than most fence catalogs promise. This page covers the specs, the failure points, and the honest installed pricing so you can get the run replaced right and stop patching it.
Which Dvele Models This Applies To
Dvele builds panelized and modular-style homes, and its fence packages vary by model and by site plan. Rather than match a model number you might not have, we work from measurements and material specs, which is what actually determines the replacement. Before we quote anything, we verify three things on site or from photos:
- Run length and post spacing. Dvele fencing typically sets posts on a consistent center-to-center spacing. Measure your worst sagging section and note the spacing; that number, not the model line, drives the material order.
- Height and style. Florida residential fence runs commonly sit at 4 ft, 5 ft, or 6 ft. Dvele packages tend to favor clean modern profiles, so confirm whether your run is a standard privacy style or the open post-and-rail look before ordering panels.
- Footing and material. Vinyl, aluminum, and wood each anchor differently. We check whether the existing footings are poured concrete or driven, because that decides the install method and the price.
On the OEM-versus-aftermarket question: Dvele-compatible fence systems don’t require a proprietary factory part in most cases. What matters is matching the post spacing, panel height, and material grade. We work with quality aftermarket manufacturers who meet the same specifications, and it’s usually the better value, but we’ll tell you plainly when a factory-matched piece is the right call. We don’t stock parts and we don’t carry inventory on a truck; every material order is sourced for your specific run. If your home also uses KraftMaid, Cambria, or Silestone finishes, our higher-traffic trade partners handle those lines as well.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Fence Installation Is Failing
Fencing in The Hammocks takes a beating that fence marketing rarely accounts for: intense UV, humidity that swells and softens wood, and storm-driven water that undermines footings. Here’s what actually fails first and why.
- Gate that sags or drags. Gravity and wood swelling pull a gate out of square over time. When the latch won’t catch or the bottom edge scrapes the ground, the hinge hardware or post has shifted.
- Posts leaning after a wet season. A post that was set too shallow or in loose fill moves once saturated soil loosens its hold. It’s not cosmetic; a leaning post loosens the panels attached to it.
- Vinyl panels cracking or bowing. South Florida’s UV load and heat make lower-grade vinyl brittle and prone to buckle and crack over the years. Hairline cracks at the panel edges are the early warning.
- Loose or missing fasteners. Stainless and coated screws still back out from vibration and thermal cycling. A run that wobbles when you push it needs its fasteners rechecking and often its footings refilled.
- Water pooling at the base. Poor drainage along the fence line softens the footing and rots wood at grade. If you see standing water or soil pulling away from the post, the base is already compromised.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A Dvele-compatible fence installation in The Hammocks runs $3,500 – $9,000 installed, and that’s the honest range for a full residential run. What moves the number is run length, material (vinyl and aluminum sit at different price points than wood), footing work, gate count, and whether we’re removing an old run first.
Our quotes break the number into line items: materials by linear foot, footing and post work, gate hardware, and removal of the old fence. Upfront pricing, no surprises, means the number you see is the number you pay. Our technicians have up to 12 years of experience, all background-checked and uniformed.
Every install is backed by the 730-Day Done Right Promise: if it isn’t set right, we make it right. There’s no shorter or conditional warranty behind that guarantee. Call (844) 761-9356 for a free estimate and a written line-item quote.
DIY or Call Us?
You can safely check and do small things yourself. Walk the run and note which posts are loose and which panels are cracked. Check whether the gate hinge screws are stripped or the post itself has moved. Clear soil and debris away from the base to see how far water has softened the footing. That’s useful information, and we’ll take it.
Where it goes wrong is the actual replacement. A fence run that looks straightforward is a footing job, not a part swap, and a post set too shallow or in loose fill leans again the first wet season. Pulling out old footings and setting new posts in The Hammocks’ soil is the step most homeowner installs get wrong, and it’s also where materials get ordered to the wrong height or spacing and the whole run gets re-cut. If you’re already patching the same section twice, the footing is the issue. Call (844) 761-9356 and we’ll tell you on the phone whether it’s a repair or a full run.
FAQs
How long should a fence in The Hammocks last?
A well-built fence in The Hammocks typically holds up for roughly a decade or longer, with vinyl and aluminum outlasting wood in this climate. UV and standing water are what shorten that life, so good footings and drainage matter as much as the material. Call (844) 761-9356 for a free estimate on a replacement run.
Can the fence be repaired instead of replaced?
Often yes on the small stuff: a sagging gate, a handful of loose fasteners, or one post that needs refilling. Once several posts lean or panels are cracked across the run, replacement is the better value because the footings are failing, not the parts. We’ll tell you which one you need before you commit.
How long does the replacement take?
Most residential Dvele-compatible fence runs are completed in a single visit once materials are on site. Run length and footing work extend it, and we’ll give you an honest timeline with your written estimate. Call (844) 761-9356 to schedule.
How do you source the part?
We measure your run and order the panels, posts, footings, and gate hardware to spec, matching Dvele’s spacing and height rather than guessing from a model number. We don’t stock parts and nothing comes off a truck. Estimates are free, so call (844) 761-9356 and we’ll walk through what your run needs.
When your Dvele fence in The Hammocks is failing, the fix is a proper install, not another patch. Call (844) 761-9356 for a free estimate and design consult with Groundwork Construction Co. of The Hammocks. Upfront pricing, live people answering around the clock, and the 730-Day Done Right Promise on every job.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.