A Groundwork company - serving The Hammocks, FL

CGI Windows & Doors in The Hammocks, FL

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Windows & Doors: The The Hammocks Owner’s Guide

We install CGI-compatible windows and doors across The Hammocks, and a typical replacement runs $4,500 – $15,000 for standard window sets or $8,000 – $25,000 for impact-rated units, with most single-unit swaps finished in a day once the correct part is matched. Groundwork Construction Co. of The Hammocks is an independent service provider and is not affiliated with CGI. The failing part announces itself before it gives out: a sash that won’t sit flush, a door slab dragging on the jamb, a seal that fogs from the inside, or water tracking across the interior sill after an afternoon storm. In The Hammocks, the trigger is almost always the same – humidity and wind-driven rain working a gasket or weatherstrip past the point where it can recover.

Call (844) 761-9356

Which CGI Models This Applies To

CGI’s residential lines are identified by a series code etched on the spacer bar or printed on a certification label tucked into the head jamb, not by the homeowner’s receipt. That label tells you the series, the glass package, and the design pressure rating – the three things that decide whether a replacement sash, sill, or operator will actually fit. We measure rough opening, frame depth, and the offset of the hinge stile before ordering; matching by overall width alone is the most common compatibility mistake we correct, because a series with a reinforced sash frame can share its outer dimensions with a standard model and still take a different balance or roller assembly.

On the OEM-versus-aftermarket question, we go OEM for hard parts – multipoint lock gear, tilt latches, and anything that carries the warranty – and use qualified aftermarket equivalents for gaskets, weatherstrip, screens, and rollers, where the spec matters more than the brand stamp. If the original is discontinued, we source the closest rated match and say so in writing before you approve anything. We also work alongside KraftMaid, Cambria, and Silestone on the interior side when a door or window replacement touches cabinetry or counters.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Windows & Doors Is Failing

  • Interior glass fogging or a milky haze between panes. The sealed unit has lost its desiccant charge and the gas has escaped; the glass is done, not just dirty, and replacement is the fix.
  • Water or dark staining on the interior sill after a storm. A compressed or brittle weatherstrip gasket has stopped sealing against wind-driven rain, which The Hammocks gets in force during the summer pattern.
  • A sash that won’t lock or sits proud in the frame. A failed balance, worn tilt latch, or a hinge that has pulled from the jamb has thrown the sash out of square.
  • A door slab dragging or binding through its swing. Worn rollers, a settled jamb, or a corroded multipoint lock is pulling the operating hardware out of alignment.
  • Water staining or soft spots at the frame corners. Failed sealant and flashing let moisture reach the rough opening, and in Florida’s salt-laden air that turns into rot faster than most owners expect.

Replacement Cost & What’s Included

Installed pricing in The Hammocks follows the part, the glass, and the opening – not a flat rate. Here’s what we quote, with the number in writing before any work starts:

Job Installed range in The Hammocks
Window replacement (standard, per set) $4,500 – $15,000
Impact window installation $8,000 – $25,000

The range moves on unit count, glass package, and whether the opening needs flashing or trim repair behind the frame. Parts and labor are broken out line by line, so you see what the part costs and what the install costs. Every job is covered by our 730-Day Done Right Promise, and permits are pulled where the scope requires – we don’t leave that to you.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

An owner can safely check gaskets for cracks, clean and lubricate rollers, replace a screen, and test whether a sash locks squarely – those are low-risk and worth doing first. What goes wrong is the next step: prying a sealed unit or a sash out of a frame that’s still under load, or chasing a leak by sealing the interior sill and trapping water in the wall cavity. Windows and doors on upper floors, and anything involving the rough opening, flashing, or impact-rated glazing, need a trained professional. If you’re unsure whether the part is the seal, the balance, or the frame itself, call (844) 761-9356 and we’ll tell you straight – the estimate is free and the call is answered by a live person, 24/7.

FAQs

How long should CGI windows and doors last in The Hammocks? Expect 15 – 25 years from the frame and hardware and 10 – 20 for the sealed glass unit; the humidity and storm exposure in The Hammocks tend to push seals and gaskets toward the shorter end. When a seal fails well inside that window, replacing the failed component early saves the frame.

Can a failing part be repaired instead of replaced? Often, yes – gaskets, weatherstrip, rollers, balances, and lock hardware are repairable when the frame and glass are sound. Clouded glass or a rotted frame corner means replacement, and we’ll tell you which you’re looking at before quoting. Call (844) 761-9356 for an exact quote – the estimate is free.

How long does the swap take? Most single-unit parts and replacements are completed in a single visit, and multi-window jobs are usually wrapped within one to three days depending on count and glass lead time. We confirm the schedule in writing once the part is matched.

How do you source the part? We identify your series from the certification label, order OEM for hard parts and rated aftermarket for wear items, and verify the fit against the opening before install. Nothing is ordered without your written approval on the quote.

Get a Free Estimate on Your CGI Windows & Doors

If a CGI window or door in your The Hammocks home has stopped sealing, locking, or draining the way it should, the fix starts with an accurate read on which part failed and what it actually costs to replace. Groundwork Construction Co. of The Hammocks brings background-checked, uniformed technicians, upfront pricing with no surprises, and the 730-Day Done Right Promise on every job – built to last, backed in writing. Call (844) 761-9356 for your free project estimate and design consult, and take $1,000 off projects over $10,000 with 0% financing for 18 months.

Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 761-9356
Local Service Coverage

Request a Free Estimate in The Hammocks

Tell us what you need - Groundwork Construction Co. of The Hammocks responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch