Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The The Hammocks Owner’s Guide
We install Boral-compatible kitchen remodeling in The Hammocks, and most full kitchen projects run $14,000 to $45,000 in this market. When a Boral component fails – a cabinet box that swells, a door that sags, a finish that lifts – the problem almost always shows up as a door or drawer that won’t sit flush, soft spots near the sink base, or a finish that peels along the bottom rail. Homeowners in The Hammocks usually spot it first at the toe kick or around the dishwasher, where moisture sits longest. Groundwork Construction Co. of The Hammocks is an independent service provider and is not affiliated with Boral.
Which Boral Models This Applies To
Boral kitchen products span several lines, and the part you need depends on which one is in your home. Boral cabinet and door systems come in framed and frameless box construction, and the door overlay – full overlay versus standard – decides which hinge and drawer glide will actually fit. Boral also makes countertop and surfacing products alongside its cabinet lines, and the two use different attachment and sealing methods. Before ordering anything, find the label inside the cabinet door or on the back panel; it lists the series name and often the box dimensions. If the label is gone, measure the door width, height, and overlay (how far the door covers the frame edge) and match those numbers to the series spec sheet.
On the OEM-versus-aftermarket question, Boral-specific hinges, glides, and filler strips are the safe match when your boxes are still square and the finish is intact. Quality aftermarket equivalents – Blum, Grass, and similar – work well for glides and hinges and often outlast the originals, but they don’t match Boral’s proprietary hole patterns without a template. For doors, drawer fronts, and any finished surface, go OEM or a custom-matched fabricator. A mismatched finish is the one thing that never blends, especially in Florida light.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Kitchen Remodeling Is Failing
- Door sag or rub at the frame. The hinge plate has pulled loose or the screw holes have stripped in the particleboard core. Common after years of humidity cycling in The Hammocks.
- Soft or swollen cabinet base near the sink and dishwasher. Moisture has reached the box core. Boral’s box construction resists water well, but a failed seal at the counter joint lets it in anyway.
- Finish peeling along the bottom rail or toe kick. Standing moisture and cleaning products break down the edge seal. The veneer lifts from the bottom up.
- Drawer that drags or drops when pulled. The glide has worn or the rear mount has cracked. A hard pull on an overloaded drawer speeds this up.
- Countertop seam lifting or darkening. The seam adhesive has failed and water is wicking under the edge. Left alone, it reaches the cabinet top and swells the box.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed kitchen remodeling in The Hammocks runs $14,000 to $45,000 for a full project. Smaller scopes price lower: a small kitchen remodel is $9,000 to $20,000, cabinet installation is $4,000 to $13,000, countertop installation runs $2,000 to $6,500, and backsplash work is $800 to $2,500. A kitchen island installation adds $3,000 to $10,000.
What drives the range is box count, whether you’re swapping doors and fronts only or replacing boxes, counter material, and how much plumbing or electrical has to move. We quote parts and labor as separate line items so you can see exactly what the Boral component costs versus the install. Every job carries the 730-Day Done Right Promise, and your written quote is the number you pay – no change orders mid-job. Groundwork Construction Co. of The Hammocks also works with KraftMaid, Cambria, and Silestone when a full replacement makes more sense than a part match.
DIY or Call Us?
You can safely check a few things yourself: open every door and look for stripped hinge screws, press the cabinet base near the sink for soft spots, and check the counter seam for lifting. Photograph the label inside the door and measure the overlay. That’s where a homeowner’s safe work ends on most of this.
What goes wrong with DIY: replacing a hinge or glide in a loaded cabinet can drop the door or the whole box if the mounting screws are stripped, and re-sealing a counter seam over a wet core traps the moisture and speeds the damage. Cabinet boxes are heavy and awkward, and working alone is how backs get hurt. If your boxes are swollen or the seam is failing, stop and call us. For an exact quote on your Boral kitchen, call (844) 761-9356 – estimates are free.
FAQs
A well-sealed Boral cabinet should hold up for 20 to 30 years, but in South Florida humidity that drops to 15 to 20 if the seals at the sink and counter aren’t maintained. The killer here isn’t age – it’s moisture reaching the box core. Reseal the counter joint and the sink base every few years and you’ll get the upper end. Call (844) 761-9356 for an inspection and a free estimate.
Often yes. Stripped hinge screws can be filled and re-driven with longer screws, and a single failed glide or hinge is a small repair. Once the box core is swollen or the finish has lifted, repair doesn’t hold and the part has to be replaced. We’ll tell you which side of that line you’re on. Call (844) 761-9356 for a straight answer and a free estimate.
A single door, drawer front, or glide set is usually a short visit, and most of our jobs finish in a single visit. A full cabinet or countertop replacement depends on the scope – a small kitchen remodel typically takes a few days to a week. We pull permits where required and pass inspection before we close out. Call (844) 761-9356 to schedule your free estimate.
We match your Boral series from the label or from measurements, then order the OEM part or a spec-matched equivalent. We don’t claim to stock Boral parts or carry them on a truck – the right part is ordered to your model so it fits and finishes to match. That’s the only way to avoid a color or fit mismatch. Call (844) 761-9356 and we’ll start the match with a free estimate.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.