Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Bathroom Remodeling: The The Hammocks Owner’s Guide
We install Blanco bathroom fixtures and the parts that keep them running in homes across The Hammocks, and a full bathroom remodel typically runs $9,000 to $28,000 depending on scope. Smaller jobs – a vanity swap, a shower replacement, a single fixture that’s failed – land well under that, and most single-visit plumbing and fixture work gets scheduled within the week, not same-day.
Owners in The Hammocks usually discover a problem the same way. The undermount sink they chose from Blanco starts pulling loose from the counter, or a slow drip appears under the bowl that no one notices until the cabinet base swells. Sometimes it’s the finish on a faucet flaking after years of hard water, or a drain assembly that won’t seal no matter how hard the stopper gets pressed. By the time it’s visible, the fixture has usually been failing quietly for months.
Key Takeaways
- Blanco bathroom fixtures and their parts vary by model line – the wrong part won’t fit, no matter how close it looks.
- Full bathroom remodels in The Hammocks run $9,000 to $28,000; single fixture repairs cost far less.
- Undermount sink brackets and drain assemblies are the parts we replace most often.
- We’re an independent contractor, not affiliated with Blanco – but we source their parts correctly.
Which Blanco Models This Applies To
Blanco’s bathroom line covers undermount and drop-in sinks, faucets, and shower fixtures, but the parts aren’t universal across models. The sink you have matters most here. Blanco’s undermount sinks run in standard widths – typically 16 to 20 inches front to back on a bathroom bowl – but the mounting hardware and the drain hole size change between series. A drain assembly built for one bowl won’t seal in another, even when both look like standard 1-3/4-inch drains at a glance.
To identify the right part, start under the sink. Most Blanco models carry a stamp or sticker on the underside of the bowl with the model number. If that’s worn off, measure the drain opening and photograph the mounting clips before you order anything – the clip style is often the tell. For faucets, the cartridge is the part that fails, and cartridge part numbers are model-specific; pulling the handle and matching the cartridge shape and stem length is more reliable than guessing from the faucet’s outward look.
On the OEM-versus-aftermarket question: Blanco’s own replacement parts fit correctly the first time, and we default to them on anything load-bearing, like sink mounting hardware. Aftermarket drains and cartridges are fine when they match the spec exactly, but “close enough” is how homeowners end up doing the job twice. We’re an independent service provider, not affiliated with Blanco, so we order the part that matches your model, not whatever the box store has on the shelf.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Bathroom Remodeling Is Failing
- The sink is separating from the counter. Undermount sinks rely on brackets and adhesive, and in The Hammocks humidity those brackets can loosen over time. A bowl that flexes when you press on it is already working its way loose.
- Water pooling under the sink cabinet. This is usually a failed drain gasket or a cracked tailpiece, not the bowl itself. Left alone, it rots the cabinet base – a repair that costs far more than the part.
- The faucet drips or the handle feels loose. A worn cartridge is behind most of these. It’s a small part, and the drip wastes water until it’s replaced.
- The drain stopper won’t hold water or won’t open. The pop-up assembly has failed, usually a corroded pivot rod or a stripped lift rod. Common on fixtures past the ten-year mark.
- Finish flaking or pitting on the faucet or drain. Hard water and Florida’s mineral content wear finishes down faster than most owners expect. Once it’s pitted, replacement is the fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what the work runs in The Hammocks, with parts and labor bundled so there are no surprises once we’re on site:
| Job | Installed Price Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
| Walk-in shower installation | $4,500 – $12,000 |
What drives the range: the fixture itself, whether the cabinet or counter needs repair from water damage, and whether the drain and supply lines are in good shape once we open things up. We quote the parts and the labor as separate lines so you can see exactly what you’re paying for. Every job is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. Calls are answered by a live person, 24/7, and estimates are free with no-hassle upfront pricing.
DIY or Call Us?
There’s a real split here, and it’s worth being honest about it. You can safely check the model stamp under the sink, measure the drain opening, tighten a loose faucet handle, or clear a clogged drain with a plunger. Those are two-minute jobs and you don’t need us for them.
Where DIY goes wrong: replacing an undermount sink’s mounting hardware or re-seating a loose bowl. A sink that lets go while it’s full of water can crack the bowl and damage the counter and cabinet below – the repair climbs fast. Faucet cartridges are fiddly but doable; swapping a drain assembly under a mounted sink is where most owners get stuck and end up calling anyway, with a stripped fitting to show for it. If you’re unsure which side of the line you’re on, call us and we’ll tell you straight. Reach us at (844) 761-9356 – the estimate is free.
FAQs
Expect 10 to 15 years from a quality Blanco faucet or sink before parts start failing, though Florida’s hard water and humidity push the finish and the moving parts toward the shorter end. Sink mounting hardware and drain assemblies often need replacing before the bowl itself does. Call (844) 761-9356 for an exact quote – estimates are free.
Sometimes. A dripping faucet is almost always a cartridge swap, not a new faucet – repair is the right call. A pitted drain or a sink that’s separating usually needs the part replaced, because the failure is in the material, not a wear item. We’ll tell you which one you’re facing before any work starts. Call (844) 761-9356 for a free estimate.
A faucet cartridge or drain assembly swap is typically an hour or two, and most single-fixture jobs are completed in a single visit. A sink re-seat or a vanity replacement takes longer because of the cabinet access. Full bathroom remodels in The Hammocks run one to three weeks depending on scope. Call (844) 761-9356 to schedule your free estimate.
We match the part to your model number – read from the stamp under the sink or, on faucets, matched to the cartridge – before anything is ordered. Blanco’s own parts are the default on anything load-bearing; quality aftermarket equivalents work when they meet the exact spec. We also handle KraftMaid, Cambria, and Silestone on broader bath projects. Call (844) 761-9356 for a free estimate.
When a Blanco fixture in The Hammocks starts failing, the fix is usually simpler and less expensive than owners fear – the key is matching the part to the right model the first time. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and back every job with the 730-Day Done Right Promise. Call (844) 761-9356 for a free estimate, and we’ll get your bathroom back in working order.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.