Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Kitchen Remodeling: The The Hammocks Owner’s Guide
Belgard kitchen remodeling installation in The Hammocks typically runs $14,000 to $45,000 for a full kitchen, depending on cabinet layout, countertop material, and whether structural work is involved. Most owners discover a problem when a seam lifts, a piece chips at an edge, or a cabinet face no longer sits flush against a paver-textured surface that seemed fine a season ago.
The first sign is usually subtle: a hairline crack at an inside corner, a joint that opens a few millimeters in the summer heat. In The Hammocks, where humidity runs high year round and afternoon storms push moisture into every exterior-facing room, these surfaces get tested harder than in most of the country. By the time a Belgard surface starts to visibly fail, the underlying issue – adhesive failure, improper substrate prep, or thermal movement against a rigid cabinet run – has usually been growing for a year or more. Our technicians have up to 12 years of experience reading that pattern before the damage spreads.
Which Belgard Models This Applies To
Belgard is first and foremost a hardscape brand, so most of the Belgard-labeled material you’ll find in a The Hammocks kitchen shows up as paver-textured backsplash, decorative wall block used as an accent or island face, or outdoor-grade tile carried over from a patio project into a sunroom-style kitchen. Identifying the exact product matters before any replacement order goes in. Look for the original carton label, the supplier’s invoice, or a stamp on the back of the paver or block face – Belgard color names and texture lines shift between production runs, so a visual match alone is not reliable.
The OEM-versus-aftermarket decision here has a real cost: a genuine Belgard paver or block in the current color line keeps the texture and tone consistent with the rest of the floor or accent wall, while a generic equivalent often reads as a patch even when the dimensions are right. For dimensional tolerance, Belgard paver units commonly run with a slight face variation that cabinet-grade material does not, and an installer who doesn’t account for that will end up with a lip you can feel underhand. We’re an independent service provider and not affiliated with Belgard, but we regularly match their product lines to The Hammocks kitchens. If your kitchen uses KraftMaid cabinets, Cambria or Silestone counters, we coordinate those too.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Kitchen Remodeling Is Failing
These are the symptoms most The Hammocks owners actually report, and what’s usually going on underneath:
- Hairline cracks at inside corners or along seams. Thermal expansion against rigid cabinetry is the cause. Belgard paver material moves with heat; if the install used a rigid joint instead of a flexible one, the stress shows up as a crack within a couple of seasons.
- Lifted or hollow-sounding edges. Adhesive has released from the substrate, often from moisture trapped during a humid stretch. Tap the edge with a screwdriver handle – a hollow tone confirms it.
- Efflorescence (white chalky bloom) on the face. That’s salts migrating from moisture behind the material, common in The Hammocks where exterior walls sweat through the summer. It points to a waterproofing gap, not a cleaning problem.
- Color fading or chalking on a sun-facing run. UV exposure through a large window can fade an older Belgard finish faster than the rest of the room. You’ll notice it against a cabinet or counter that hasn’t moved.
- Grout or joint sand washing out seasonally. On any paver-based surface near a sink or exterior door, joint sand migrating means water is finding a path. Left alone, that path reaches the substrate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In The Hammocks, a focused Belgard surface repair or replacement within a kitchen remodel project typically falls inside the broader kitchen budget, and line-item pricing breaks out clearly when we build the estimate:
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation (where Belgard paver-texture is used): $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
- Small kitchen remodel as a whole: $9,000 – $20,000
What drives the range: substrate condition (worn adhesive means more demo), material line (current Belgard color runs cost more than discontinued-stock), and how much cabinetry has to come out to access the failing surface. Every estimate is written line by line, so the number you see is the number you pay. All installation work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Upfront pricing, no surprises.
DIY or Call Us?
You can safely inspect and document. Photograph the failing area with a coin or ruler for scale, tap along edges to map hollow spots, check the original supplier invoice or carton label, and note whether the failure follows one seam or spreads. That information alone shortens your estimate conversation.
Where DIY goes wrong on Belgard kitchen surfaces: pulling a paver or block face out of an installed run almost always damages the adjacent pieces, and re-setting against an old adhesive bed leaves you with the same failure in six months. Cutting or grinding any stone, block, or tile product without proper dust control is a genuine respiratory hazard, and moisture-damaged substrate under a kitchen surface is usually worse than the top layer suggests. Those are the moments to call. The inspection is free. Call (844) 761-9356 and we’ll tell you straight whether it’s a patch or a reset.
FAQs
How long does a Belgard kitchen surface last in The Hammocks? Ten to fifteen years is realistic when the substrate and waterproofing were done correctly, shorter where humidity and sun exposure are heaviest. The material itself is durable; the failure is almost always in the adhesive, joint, or waterproofing layer beneath it. Call (844) 761-9356 for an exact quote – estimates are free.
Can it be repaired instead of replaced? Yes, in many cases. A single failed seam or chipped face can often be reset or replaced without touching the rest of the run, provided you can match the current Belgard color. Wider failure or multiple hollow spots usually means the whole surface should come up. Call (844) 761-9356 and we’ll tell you which one you’re looking at.
How long does the swap take? A single-surface reset is often completed in a single visit. A full kitchen surface replacement tied to a cabinet or countertop change runs longer, and we’ll give you a written schedule before we start. No change orders mid-job.
How do you source the part? Through Belgard’s current dealer and supplier channels, matched by label, product line, and production run where possible. We don’t carry parts on a truck and we don’t claim stock – we order the right piece and schedule around its arrival. That’s how you avoid a patch that doesn’t match. Call (844) 761-9356 to schedule your free estimate.
Whether it’s a single failing seam or a full kitchen rebuild in The Hammocks, the next step is the same: get a real number in writing. Our team has been serving local communities since 2014, calls are answered by a live person 24/7, and every project is backed by the 730-Day Done Right Promise. Call (844) 761-9356 for your free estimate and design consult – the team at Groundwork Construction Co. of The Hammocks is ready to help you get it right the first time.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.