A Groundwork company - serving The Hammocks, FL

Barrette Roofing in The Hammocks, FL

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Roofing: The The Hammocks Owner’s Guide

Barrette roof repair and replacement in The Hammocks typically runs $400 – $1,800 for repairs and $8,000 – $20,000 for a full roof replacement, and we schedule most repairs within a few days of your call. Barrette outdoor structures – roof panels, ridge caps, and post-and-beam frames for pergolas and pavilions – are engineered assemblies, so a failed panel, a backing-out fastener, or a loose cap usually signals a fixable problem before it becomes a full teardown. Owners in The Hammocks most often notice it after a summer storm: water pooling on a panel seam, a screw head lifted proud of the surface, or the underside of the roof vent showing rust streaks. We install Barrette-compatible roofing and repair failing assemblies under our 730-Day Done Right Promise. One note up front: Groundwork Construction Co. of The Hammocks is an independent service provider and is not affiliated with Barrette.

Call (844) 761-9356

Which Barrette Models This Applies To

Barrette makes a wide catalogue of outdoor roof systems, and the part that fits your structure depends on which line it came from. Most residential installations in South Florida are aluminum or vinyl post-and-beam pergolas, pavilions, and covered patio kits. The panels, ridge caps, and fastener sets are not interchangeable across lines – a panel cut for a 4×4 post system won’t seat cleanly on a 6×6 frame, and ridge-cap profiles differ between flat and profile-roof kits.

To identify your model, look for a label or stamped plate on the underside of the beam or the inside face of a post. If the label is gone, measure the post dimension, the panel bay width, and the roof pitch. Those three numbers narrow it fast. The part number is usually the last line on the label – photograph it before anything else.

On the OEM-versus-aftermarket call: for Barrette specifically, match the OEM part where you can. The fastener heads, panel profiles, and cap geometry are proprietary, and an aftermarket panel that’s close in size often leaks at the lap. Where an OEM part is discontinued, we source a compatible equivalent and confirm the fit on site before installing. For other interior brands – KraftMaid, Cambria, Silestone – we handle those through our separate service lines.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Roofing Is Failing

  • Water pooling or dripping at panel seams. The seam gasket or lap fastener has loosened, letting South Florida rain wick under the panel. Left alone, this rusts the beam.
  • Lifted or backed-out screws. Thermal cycling between hot afternoons and cooler nights works fasteners loose over time. A proud screw head is a leak waiting to happen.
  • Rust streaks on the underside of the roof or beam. This points to moisture trapped against the frame, usually from a failed cap or gasket. In The Hammocks, our salt-laden air accelerates it.
  • A loose or rattling ridge cap. Caps are held by pressure and clips. Once a clip fails, wind catches the cap and it lifts.
  • Sagging or out-of-square frame. A panel that’s sagging usually means a post footing has shifted or a connection has loosened. This one is structural and needs a look.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For The Hammocks, expect these installed ranges, parts and labor included:

Work Installed Range
Roof repair (panel, seam, fastener, cap) $400 – $1,800
Full roof replacement (Barrette-compatible) $8,000 – $20,000
Tile roof repair $600 – $2,500
Metal roof installation $15,000 – $40,000

The range depends on panel count, pitch, and how much framing is sound versus needing replacement. We give upfront pricing, no surprises – the number you see is the number you pay, written out line by line before any work starts. Every job carries the 730-Day Done Right Promise: if it’s not done right, we make it right. Large projects over $10,000 get $1,000 off, and 0% financing for 18 months is available.

DIY or Call Us?

You can safely photograph the label, measure the post and bay, and tighten a loose screw that’s clearly accessible from the ground with a stable ladder. What you shouldn’t do is climb onto the roof of a pergola or pavilion to reseal panels, re-set a ridge cap, or reattach a loose post connection. This is height work on an engineered assembly, and falls are the real risk, not the part.

If the frame is out of square, a panel is sagging, or water is reaching the beam, call us. Our technicians have up to 12 years of experience, and we’ll tell you honestly whether it’s a part swap or a larger repair. Call (844) 761-9356 for a free estimate – a live person answers 24/7.

FAQs

How long does Barrette roofing last in The Hammocks?
A well-installed Barrette roof system handles 10 to 15 years in South Florida’s climate before major attention, though our salt air and summer UV shorten fastener and gasket life. Keeping seams and caps tight is what gets you there.

Can the part be repaired instead of replaced?
Often, yes. A single failed panel, seam, or cap is usually a repair in the $400 – $1,800 range, not a replacement. We inspect the frame first – if it’s sound, we repair. Call (844) 761-9356 for a free estimate.

How long does the swap take?
Most panel, seam, and cap repairs finish in a single visit. A full roof replacement on a Barrette-compatible structure typically takes a few days depending on size and pitch. We confirm the timeline in your written quote.

How do you source the part?
We match the OEM Barrette part by model and label first, and source a compatible equivalent only if the original is discontinued, test-fitting before installation. We don’t claim to stock parts – we source the right one for your assembly.

Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.

Ready to stop the leak or get an honest read on your Barrette roof? Call (844) 761-9356 for a free estimate and design consult. Upfront pricing, live answers around the clock, and work built to last, backed in writing.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 761-9356
Local Service Coverage

Request a Free Estimate in The Hammocks

Tell us what you need - Groundwork Construction Co. of The Hammocks responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch