Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Fence Installation: The The Hammocks Owner’s Guide
Barrette fence installation in The Hammocks typically runs $3,500 – $9,000 installed, depending on fence height, total linear feet, and which Barrette series you’re matching. We install and repair Barrette-compatible vinyl and aluminum fencing throughout The Hammocks, and most jobs are scheduled inside a normal project window, not squeezed into a single afternoon.
Homeowners here rarely wake up expecting a fence problem. It shows up after a summer of afternoon storms: a gate that sags, a post that leans a few degrees, a panel that’s gone chalky and gray. The fence looked fine in January. By September it tells a different story. That’s usually the moment we get the call, and it’s the right moment to get ahead of it before a $300 repair becomes a full $6,000 replacement.
Key Takeaways
- Installed Barrette-compatible fence in The Hammocks: $3,500 – $9,000
- Barrette vinyl differs from generic vinyl in wall thickness and post-to-rail locking design – mismatched parts fail early
- South Florida heat and seasonal rain shorten fence life; UV exposure and soil movement are the two biggest culprits
- Groundwork Construction Co. of The Hammocks is an independent service provider and is not affiliated with Barrette
- Every installation is covered by our 730-Day Done Right Promise
Which Barrette Models This Applies To
Barrette’s residential fence lines break down into distinct series, and the series matters more than most people realize. Their vinyl privacy fencing typically runs in lines built around the 6-foot and 8-foot heights, with specific panel widths and post caps that are not interchangeable between series. The aluminum lines – used widely around pools and property boundaries where a metal look is wanted – use their own rail profile and brackets. Order a rail from the wrong series and it won’t seat, no matter how close the color match looks in photos.
To identify what you actually have, do three things. Measure the height of a post from the ground to the top of the cap. Measure the width of one assembled panel edge to edge. Then flip a post cap over or remove a rail end and photograph any labels or model codes. Barrette stamps or labels their components on many lines, and that code is the fastest route to the exact match. If there’s no label, the measurements and a photo of the locking mechanism get us there.
On the OEM-versus-aftermarket question: for Barrette specifically, we recommend matching the OEM part whenever the fence is structurally sound and only a component has failed. Aftermarket equivalents exist, and some are genuinely decent, but Barrette’s vinyl locking systems are proprietary. A generic rail or post cap often fits loosely, which lets water in and shortens the life of everything around it. When a full section is being replaced, a compatible non-OEM panel can make sense – and we’ll tell you honestly when it does. We do not claim to stock Barrette parts, and no parts ride on a truck; every component is sourced and matched to your specific fence before installation day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Fence Installation Is Failing
- Posts leaning or pulling out of the ground. Usually caused by soil settling or an undersized post footing, and The Hammocks’ sandy-limestone mix and heavy wet-season saturation accelerate it. A single leaning post often signals others are loose too.
- Panels sagging or bowing between posts. Often the rail has cracked internally where it meets the post. Vinyl becomes brittle under sustained UV exposure, so a panel that flexed easily five years ago can snap under a modest push today.
- Gates dragging or not latching. Hinges and latch hardware wear, but the underlying cause is usually post movement – the gate hung true and the post shifted. Replacing hardware alone tends to fail again.
- Chalky, faded, or gray surfaces. Sun exposure breaks down the surface layer of vinyl. Mild fade is cosmetic; a chalky finish that wipes off on your hand points to surface degradation worth inspecting before it turns into cracking.
- Loose caps, cracked rails, or visible gaps at joints. Water gets into these gaps, and in a climate with a distinct wet season, that moisture finds every seam. Small openings widen through the year and reduce the fence’s structural integrity.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Barrette-compatible fence installation in The Hammocks runs $3,500 – $9,000. That range covers materials and labor together – no surprise line items on the back end. What drives the number:
- Linear feet: the biggest factor by far. A standard residential lot perimeter versus a partial boundary makes a large difference.
- Height and style: 6-foot privacy vinyl sits at the lower end of the range; taller runs and aluminum pool-code fencing move toward the top.
- Site conditions: rocky ground, root systems, or fences that need post footings set deeper all add labor time.
- Gate work: gates require hardware, bracing, and careful alignment – a single well-built gate is more involved than its linear footage suggests.
- Old fence removal: tear-out and haul-away add cost unless you handle it.
We give you a written line-item quote before work begins – the number you see is the number you pay. Every installation is backed by our 730-Day Done Right Promise. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available.
DIY or Call Us?
Some inspection is safe to do yourself. Walk the fence line and push each post firmly – a post that moves under hand pressure is a post with a footing problem. Check that panels are square, look for cracks at rail joints, and note any gates that drag. That information helps us quote accurately over the phone.
What we don’t recommend is digging out and resetting post footings yourself. This isn’t a high-tension spring or a gas line, but an improperly set footing on a 6-foot privacy fence is a real risk: a fence that leans into a walkway or a neighbor’s yard becomes a hazard, and a poorly anchored post can shift again within one wet season. Barrette’s proprietary locking systems also need the right parts and the right seating technique; a forced fit compromises the whole panel. Most repair jobs are completed in a single visit. Call (844) 761-9356 to schedule your free estimate – a live person answers around the clock.
FAQs
Barrette vinyl fencing typically holds up for 20 – 30 years in most climates, but The Hammocks’ combination of intense UV and a distinct wet season puts realistic expectations closer to 15 – 25 years before panels need meaningful attention. Fade and surface chalking often appear sooner than structural failure; we see cosmetic wear at the 8 – 12 year mark on south and west-facing runs. Call (844) 761-9356 for an exact quote – estimates are free.
Yes, often – a single failed post, a cracked panel, or worn gate hardware can usually be repaired without touching the rest of the fence, which keeps costs well below a full replacement. The key is catching it early, before post movement spreads to adjacent sections. Our technicians have up to 12 years of experience and will tell you honestly when repair makes more sense than replacement. Call (844) 761-9356 – estimates are free.
Most single-post and panel repairs are completed in one visit. A partial replacement covering a section of the line typically takes a day; a full-perimeter installation is scheduled across a project window based on linear feet and site conditions. We’ll give you a clear timeline with your written estimate. Call (844) 761-9356 to schedule.
We identify your series from measurements and any visible label, then source the matching OEM component before installation day – nothing is guessed from a photo alone. If the fence is structurally sound, matching the OEM part is almost always the right call because Barrette’s locking systems are proprietary. If the match isn’t clean, we’ll say so and walk you through the options. Call (844) 761-9356 – a live person answers 24/7.
Groundwork Construction Co. of The Hammocks handles fence installation across The Hammocks and the surrounding communities, along with kitchen work featuring KraftMaid and Cambria, and bathroom vanities in Cambria and Silestone. All projects are covered by our 730-Day Done Right Promise, and our background-checked, uniformed technicians arrive with upfront pricing in hand. Call (844) 761-9356 to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.