Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Richmond Heights, FL: What to Expect
Backsplash, tile & flooring work in Richmond Heights usually runs $800 – $2,500 for a backsplash on its own, or $14,000 – $45,000 when tile and flooring are part of a larger kitchen scope, and most backsplash jobs are finished in one to two days while a full floor-and-wall tile package takes one to three weeks. The number that lands in your written estimate depends on square footage, substrate condition, and what’s under the old material. Call (844) 761-9356 and we’ll walk your space, measure it, and give you a line-item quote before any tile comes off the shelf.
How a Backsplash, Tile & Flooring Job Actually Runs, Stage by Stage
Tile work is mostly prep. The setting looks simple on video. The reason a tile job fails in year three is almost always what happened before the first tile was laid, and that’s where our sequencing lives.
Stage 1 – Walkthrough and material selection (day 1, 60 – 90 minutes). We measure every surface, photograph the existing substrate, and check for movement in the floor. You leave with a written scope and a short list of tile options sized to your budget. This is the decision-heavy stage: tile size, grout color, trim profile, and layout pattern all get chosen here, because changing them later means re-ordering.
Stage 2 – Demo and substrate prep (days 1 – 3). On a backsplash-only job this is half a day: drywall comes back to sound material, old adhesive is scraped, and the wall gets flattened. On a floor it’s two to three days. Old tile and thinset come up, we check the slab for cracks and moisture, and anything soft or hollow gets replaced. On Richmond Heights slab homes, this is where we confirm the floor is actually flat, because a 1950s slab rarely is.
Stage 3 – Waterproofing and layout (days 3 – 4). Wet areas get a bonded waterproof membrane before tile. Then we dry-lay the pattern across the room or along the counter so you can see where cuts land before anything is fixed. You approve the layout in person. This is the last free moment to move a seam.
Stage 4 – Setting, grouting, and sealing (days 4 – 10 for a floor, same day for a backsplash). Tile goes down or up, cures, gets grout, then gets sealed where the material calls for it. Grout joint width and color get confirmed at the start of this stage, not the end.
Stage 5 – Final inspection and walkthrough (last day, 30 – 45 minutes). We check lippage, grout lines, caulk at every change of plane, and outlet cutouts. You get the punch list in writing. Every job here is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Backsplash, Tile & Flooring
Most of the cost swing and all of the longevity swing comes down to material picks. Here’s the honest version of what each one does.
- Ceramic wall tile (backsplash): the budget workhorse. 3×6 subway in ceramic runs at the low end of the backsplash range and holds up fine behind a counter. It’s softer than porcelain, so it chips more easily at outlets and corners, and it’s not the pick for a wall that takes direct heat.
- Porcelain tile (backsplash and floor): denser, more water-resistant, and the better choice for a floor that sees daily traffic. Larger format porcelain (12×24 and up) means fewer grout lines to clean but demands a flatter substrate – which is exactly why prep matters more than the tile itself.
- Natural stone (travertine, marble, slate): the premium end. Beautiful, and it needs sealing on a schedule in South Florida humidity. Stone is also less forgiving of slab movement, so it’s a poor match for an unlevel floor unless the substrate gets corrected first.
- Glass and mosaic: strong for a backsplash accent or a full glass wall behind a cooktop. More installation labor per square foot because of the small format, so the tile price is modest but the labor line climbs.
- Luxury vinyl plank vs. tile floor: if the floor is the priority and the budget is tight, LVP installs over a sound slab faster and warmer underfoot. It won’t outlast porcelain in a wet zone. We’ll tell you which one fits your room rather than push either.
- Grout and trim: epoxy grout costs more up front and resists staining far better in a kitchen. Schluter-style edge trim finishes an exposed tile edge cleanly; caulk at the counter-to-backsplash joint is the seam that fails first if it’s grouted instead.
What Backsplash, Tile & Flooring Costs in Richmond Heights, FL
Backsplash installation alone in Richmond Heights runs $800 – $2,500. When tile and flooring are folded into a kitchen scope, the full project lands at $14,000 – $45,000. Here’s how the line items typically break out:
| Line item | Typical range |
|---|---|
| Backsplash installation (standard kitchen run) | $800 – $2,500 |
| Floor tile installation (per room, material included) | Quoted by square footage in your estimate |
| Tile and flooring as part of a full kitchen remodel | $14,000 – $45,000 |
| Countertop installation (if paired with the tile) | $2,000 – $6,500 |
Five things push a job from the low end to the high end: square footage, substrate condition (a cracked or unlevel slab adds prep days), whether plumbing or electrical has to move, material grade (ceramic vs. natural stone vs. glass mosaic), and permit scope when the work is part of a larger remodel. A written estimate from us lists demo, prep, membrane, setting materials, tile allowance, grout, trim, and cleanup as separate lines. It does not include structural repair discovered mid-demo or a change in tile after ordering – both get quoted before we proceed, never billed as a surprise. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond Heights Homes Specifically Do to This Job
Richmond Heights is one of South Florida’s historically Black communities, and its housing stock shapes this work in ways a Kendall or Pinecrest crew won’t hit. The neighborhood runs original 1950s – 70s concrete block ranch homes alongside newer infill builds, often on the same street. That means the tile job in front of us could be a terrazzo floor under old carpet in a post-war ranch, or a fresh slab in a custom build where the layout has to match finishes chosen by a designer. The limestone bedrock sits close to the surface here, so slabs shift and crack more than they do on deeper fill, and a backsplash or floor set over a moving slab needs a membrane and a flexible setting material, not standard thinset over concrete. The high water table and summer downpours make moisture control part of every floor decision – we check slab moisture before tile goes down, not after. Permits follow Miami-Dade County requirements, and when the tile work is part of a full kitchen remodel, inspections are scheduled around the trade sequence, not ours. If the wider project scope is in play, that’s where our Kitchen Remodeling in Richmond Heights page picks up. Your ZIP 33176 address is covered either way – see Richmond Heights for the full service area.
Homeowners often pair this with Vanities, Tile & Fixtures in Richmond Heights when the bathroom is getting the same treatment, or with a Tub-to-Shower Conversion in Richmond Heights when the shower surround is the next project on the list. If you’re planning the whole room at once, our Kitchen Remodeling service covers cabinets, counters, and layout so the tile ties in rather than fights the rest.
Serving Richmond Heights, FL – Our Local Coverage Area
We serve Richmond Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Richmond Heights
A backsplash alone takes one to two days. A full floor-and-wall tile package runs one to three weeks depending on square footage and substrate prep. Call (844) 761-9356 for a realistic schedule based on your room.
Cosmetic tile and backsplash work generally doesn’t require a permit, but tile that’s part of a structural or plumbing change does, and Miami-Dade County inspections get scheduled around the trade sequence. We pull what’s required and tell you up front what falls in or out of permit scope – call (844) 761-9356 to confirm for your project.
Yes, in most cases. A straight re-tile over the existing wall or floor doesn’t touch plumbing. Moving a sink, relocating an outlet, or removing a wall to open the kitchen does, and that’s when the estimate grows. We’ll flag it during the walkthrough before you commit.
A backsplash alone runs $800 – $2,500, and tile and flooring folded into a larger kitchen scope lands at $14,000 – $45,000. The variables that move the number are square footage, substrate condition, plumbing or electrical relocation, and material grade. Call (844) 761-9356 for an exact quote – estimates are free.
Every tile and flooring job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. We also offer 0% financing for 18 months and $1,000 off projects over $10,000. Call (844) 761-9356 to schedule your free estimate.
Get a Free Estimate for Backsplash, Tile & Flooring in Richmond Heights
We’ll come out, measure the room, look at the substrate, and hand you a written line-item quote with no guesswork on the tile allowance. A live person answers the phone around the clock, and every technician who shows up is background-checked and in uniform. Call (844) 761-9356 to schedule your free estimate. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co.