Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Palmetto Estates, FL: What It Involves and What It Costs
Metal roofing in Palmetto Estates typically runs $15,000 – $40,000 for a full installation, and most homes here finish in 3 to 7 days once permits clear. The exact number depends on roof size, panel type, and whether the existing layers come off clean or hide water damage underneath. A standard 1,500 – 2,000 sq ft CBS ranch home in the 33157 ZIP lands near the middle of that range. Call (844) 761-9356 to schedule a free on-site estimate; we measure the actual roof and put a written, line-item price in your hands.
How a Metal Roof Goes On: The Five Stages We Work Through
Metal roofing isn’t a one-day drop-in. Here’s the actual sequence we follow on Palmetto Estates homes, with what you decide at each stage.
Stage 1: Inspection and measurement (day 1)
We get on the roof, photograph the deck, and check for soft sheathing, rusted fasteners, and old flashing failures. On 1960s – 80s homes here this is where we find out whether the original decking holds up. You decide the panel type and color from physical samples before anything ships.
Stage 2: Permitting (days 2 – 10, depending on review queue)
Because Palmetto Estates is unincorporated, the roof permit goes through Miami-Dade County, not a city hall. Metal roofing must meet High Velocity Hurricane Zone product approval and wind-load rules, so we submit the manufacturer’s NOA and product approval paperwork with the application. You sign the permit and pay the county fee; we handle the submittal.
Stage 3: Tear-off and deck prep (days 1 – 2 of active work)
We strip the old roofing down to the deck, replace any rotten sheathing, and check the fascia and drip edge. On flat or low-slope sections common in this area, we confirm the transition detail between the metal field and any adjoining low-slope section before closing it up.
Stage 4: Underlayment and panel install (days 2 – 5)
High-temperature underlayment goes down first, then the panels are laid and mechanically fastened per the approved wind-load schedule. Standing seam panels are seamed and clamped; exposed-fastener panels get gasketed screws at the engineered spacing. This is the longest stretch and the one most affected by afternoon storm season.
Stage 5: Flashing, trim, and final inspection (final 1 – 2 days)
Ridge caps, valley metal, pipe boots, and wall flashing go on last. Then the county inspector signs off. We walk the roof with you and hand over the manufacturer’s material warranty and our 730-Day Done Right Promise in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Choose Between
You’re not picking one product here. Metal roofing comes in a few real categories, and the trade-off between them matters on a South Florida home.
- Standing seam (hidden fastener) – the premium choice, roughly the top of the $15,000 – $40,000 range. No exposed screws to back out, cleaner look, best wind performance. Suits homeowners who intend to stay in the house long-term.
- Exposed-fastener panels (5V crimp, corrugated) – the value option. Lower cost, still meets HVHZ wind rules when installed correctly. The trade-off: gasketed screws need periodic checking as they age in salt air.
- Panel material: steel vs aluminum – steel is stronger and cheaper; aluminum resists salt corrosion better on homes near the coast and canals. On a Palmetto Estates home, aluminum or a coated/galvanized steel with a good finish is worth discussing.
- Finish and color – a factory paint finish (Kynar-type coatings) holds color longer than a bare or mill finish. Lighter colors reflect heat and help with cooling load in a subtropical climate.
- Panel profile and gauge – thicker gauge and taller seams cost more but resist wind uplift better. Miami-Dade wind-load requirements set the floor; you choose whether to go above it.
What Metal Roofing Costs in Palmetto Estates, FL
For a full metal roof installation on a typical Palmetto Estates home, plan on $15,000 – $40,000. The low end covers a smaller footprint with exposed-fastener aluminum panels; the high end covers a larger or complex roof with standing seam steel and fresh decking.
What pushes a job toward the top of that range:
- Roof size and pitch – more square footage and steeper or cut-up rooflines mean more panels, more cutting, more labor.
- Existing deck condition – rotten sheathing on an older home adds tear-off and replacement cost.
- Panel type and material – standing seam and aluminum cost more than exposed-fastener steel.
- Permit scope – HVHZ product approval and any floodplain review add administrative time; a straight re-roof is simpler than one tied to an addition or structural change.
- Access and tear-off layers – multiple old layers or tight lot access slow the crew down.
A written estimate from us itemizes panels, underlayment, flashing, labor, permit, and disposal, with the brand and gauge named. It does not include structural repairs discovered mid-job or interior ceiling repair from an old leak; we price those separately and only after you approve them. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Palmetto Estates Homes Specifically Do to This Job
Nearly all construction in Palmetto Estates is infill work on small lots built out between the 1960s and 1980s – tear-downs, additions, and second-story remodels on CBS block-and-stucco ranch homes. That shapes metal roofing here in a specific way: most of the stock still carries original flat or low-slope roofs and single-pane aluminum windows, so a metal roof is often the first real roof upgrade the house has seen. It also means permitting runs through Miami-Dade County’s unincorporated process rather than a city hall, and because the community sits near the coast and canals, many jobs trigger floodplain elevation review and HVHZ wind-load rules at the same time. Roof work here gets scheduled around the six-month rainy season, so we aim install windows at the drier stretches and keep tarps ready for afternoon storms. When the metal project is part of a full Roofing in Palmetto Estates scope, we coordinate the trades so the roof and any exterior work finish together.
Homes near the canals and in low-lying pockets see faster corrosion on fasteners and flashing, and we spec coated or aluminum components accordingly. If you’re also upgrading the openings, homeowners often pair a re-roof with Impact Windows & Doors in Palmetto Estates to hit wind-mitigation credits in one pass, or with Window Replacement in Palmetto Estates when the frames are still sound. We cover the whole of Palmetto Estates and the surrounding blocks south of Miami, and our Roofing service handles the wider trade when your project grows beyond the metal field.
Serving Palmetto Estates, FL – Our Local Coverage Area
We serve Palmetto Estates and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Metal Roofing in Palmetto Estates
Most Palmetto Estates metal roofing jobs take 3 to 7 days of active work, plus a permit review through Miami-Dade County that can add a week or more depending on the queue. Weather during the rainy season can stretch the install, since we don’t seam panels in a downpour. Call (844) 761-9356 for a timeline based on your actual roof.
Yes. Because Palmetto Estates is unincorporated, the roof permit goes through Miami-Dade County, and metal roofing must carry HVHZ product approval and meet wind-load rules. We prepare and submit the permit application and the manufacturer’s approval documents for you. Call (844) 761-9356 to start with a free estimate.
Usually not. On most Palmetto Estates CBS homes the existing structure handles a metal roof without modification, but if the inspection finds compromised framing or a low-slope section that needs a transition detail, we price it in writing before work starts. Call (844) 761-9356 and we’ll tell you what your roof actually needs.
Expect $15,000 – $40,000 for a full metal roof installation, with the price driven by roof size, panel type, material, deck condition, and permit scope. A smaller home with exposed-fastener aluminum panels sits at the low end; a larger roof with standing seam steel sits at the top. Call (844) 761-9356 for an exact quote – estimates are free.
You get the manufacturer’s material warranty on the panels plus our 730-Day Done Right Promise on the workmanship – if it’s not done right, we make it right. We hand over both in writing at the final walkthrough. Call (844) 761-9356 to schedule your estimate and review the coverage before you commit.
Get a Free Metal Roofing Estimate in Palmetto Estates
If you’re weighing metal roofing for your Palmetto Estates home, start with a free on-site estimate. We’ll measure the roof, check the deck, and put a written, line-item price in your hands with the panel type, material, and permit scope spelled out. Call (844) 761-9356 – a live person answers around the clock – and we’ll get you scheduled. No-hassle upfront pricing, background-checked uniformed technicians, and 0% financing for 18 months are available.
Written by the team at Groundwork Construction Co.