Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Kendall, FL: What It Costs and How It’s Built
A wrought iron fence in Kendall typically runs $3,500 – $9,000 for a residential run, and most installs take 5 to 10 working days from permit to final inspection. You’ll pay more for custom ornamental patterns, masonry piers, and gates, and less for simple picket panels on a small lot. Call (844) 761-9356 for a free on-site estimate with a written line-item quote.
How we build and set an iron fence, stage by stage
Iron fencing isn’t a panel-and-post job the way vinyl or wood is. It’s metal fabrication and anchor work, and the sequence matters more than the sales pitch. Here’s how a fence job actually runs.
Stage 1: Site walk and layout (day 1). We walk the property line with you, confirm the grade and the setback from the survey, and flag anything in the way: irrigation lines, pool equipment, existing stucco walls, soffit clearances. You decide the fence line and gate locations on this visit. On a hard-built Kendall lot, the survey and the property corner markers set everything that follows.
Stage 2: Permit and product submittal (days 2 – 5, varies by scope). New fencing in unincorporated Miami-Dade requires a permit when it’s over the height limit, and any fence over 6 feet or in a front/side setback needs review. Metal fences in the hurricane zone get pulled into the wind-load conversation, so we submit the fence spec with the right attachments. We handle this paperwork for you. That’s the single biggest difference between a contractor who finishes a fence job cleanly and one who leaves the homeowner holding an open permit.
Stage 3: Fabrication and prep (days 3 – 6). Panels, posts, and gate frames are cut and welded to spec. Post holes are located and dug to depth, typically 30 to 36 inches for a 6-foot iron fence, and set in concrete. If there’s an existing fence, demo goes here. You’ll confirm the post-cap and finial profile by now, because once plates are set, the top detail is locked.
Stage 4: Setting, welding, and gate hang (days 5 – 8). Posts set and cured, panels hung, rails welded or mechanically fastened depending on the system, and the gate hung with the correct latch and self-closing hardware if you want it. On a curb or corner property, gate swing direction and the clearance to the sidewalk gets checked here.
Stage 5: Coating touch-up and inspection (final day). We touch up the finish at weld points, check panel alignment, and walk the finished fence with you. We pull the final inspection with Miami-Dade County. You get the signed-off permit and the 730-Day Done Right Promise in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between on an iron fence
There’s no single “iron fence.” The spec you pick drives how long it lasts in Kendall’s salt air and how much of your budget goes into metal versus masonry.
- Solid wrought iron versus aluminum “iron-look” panels. True wrought iron is heavier and takes a genuine powder-coat or paint finish; it holds up best to salt air when it’s properly coated and touched up. Aluminum panels are lighter, rust-proof, and cheaper, but they can look thin up close. Most Kendall homeowners on a CBS lot end up with aluminum for the property line and true iron for a distinct front-gate.
- Powder coat versus paint finish. Powder coat is applied in a factory and resists rust better than touch-up paint, especially in coastal humidity. A powder-coat finish is worth the up-charge if you’re keeping the fence for 15+ years. Painted iron needs repainting every 4 – 6 years in salt air, and the seams and weld points are where corrosion starts first.
- Panel height and picket spacing. A 4-foot fence passes most HOA reviews for front yards; 5 to 6 feet is more common for back-yard security. Tighter picket spacing costs more in material and adds privacy but also adds wind load.
- Gate hardware and automation. A single-swing pedestrian gate is the standard. A driveway gate with an opener is a separate budget line entirely, and on a Kendall home the opener needs its own power run.
- Masonry piers versus all-metal posts. Stucco-over-block piers match the surrounding CBS homes and are common on Kendall frontage; all-metal posts are faster and cheaper. Piers add $400 – $900 each once formed, finished, and capped.
Our technicians have up to 12 years of experience on metal fabrication and fence work, and every project is backed by the 730-Day Done Right Promise in writing.
What Iron Fence costs in Kendall, FL
Plan on $3,500 to $9,000 for most residential iron fence jobs in Kendall. Here’s how a line-item estimate breaks down.
- Fence run, per linear foot: $35 – $65 for standard aluminum iron-look; $60 – $110 for heavier solid iron sections with a powder-coat finish.
- Post setting, per post: $40 – $90 depending on soil condition and whether piers are poured in concrete.
- Gate, per unit: $400 – $1,200 for a pedestrian gate; $1,200 – $3,500 for a driveway gate frame with hardware.
- Masonry piers, per pier: $400 – $900 finished in stucco to match the house.
- Permit and submittal: $250 – $600 depending on height, setback, and whether the fence touches the hurricane-zone conversation.
- Demo of existing fence: $200 – $700.
The four variables that push a job to the high end: total linear footage, existing fence condition, gate count and automation, and finish grade. A 90-foot property line with a single pedestrian gate sits at the low end. A corner lot with 180 feet, two gates, masonry piers, and a front-yard HOA-height restriction lands near the top of the range.
Every written estimate we produce is line-item. It includes the fence spec, the post depth, the finish, the gate hardware, the permit, and the demolition. It doesn’t include landscape restoration, irrigation repair, or a new power run to an automated gate, all of which we flag separately. 0% financing for 18 months and $1,000 off projects over $10,000 apply to fence projects of that size. Call (844) 761-9356 to schedule your free on-site estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall homes specifically do to this iron fence job
Kendall is a hard-built, fully-developed corner of unincorporated Miami-Dade west of the Turnpike. Nearly every construction job here means rebuilding an already-improved lot, and that reads directly in a fence project: fences go up against driveways, pool cages, irrigation runs, and property lines that were surveyed decades ago. Most of the housing stock is 1970s – 90s concrete block (CBS) with stucco walls and barrel-tile or shingle roofs, so the front-yard fence usually gets anchored along a stucco wall or a concrete swale rather than open ground. Newer townhomes and mid-rises along Kendall Drive have different setbacks and HOA rules.
The paperwork question comes before the price question in Kendall. Fence height, setback, and product approval run through Miami-Dade County permitting, and homeowners here ask whether we pull the permit and whether the fence spec carries the wind-load documentation the county wants. That’s not a detail, it’s the reason a fence project in a 33176 neighborhood can stall for weeks. When we quote an iron fence in Kendall, the permit scope is in the line item, not a surprise.
Salt-laden coastal air is the other local reality. Iron hardware, fasteners, hinges, and lower rails corrode faster here than inland, especially on the side of the fence that catches the easterly air. We spec galvanized or powder-coated hardware, stainless fasteners at the ground line, and we coat weld points where they meet soil. It’s why a properly finished iron fence in the 33176 market outlasts a painted one by years. If you’re also replacing the driveway or already planning to resurface the pool deck, homeowners often pair this with Patios, Walkways & Pool Decks in Kendall so the fence and hardscape get done in one permit cycle. And if a fence is part of a broader property improvement, our Fence Installation service sits inside a full Fence Installation in Kendall scope that covers gates, property-line work, and every fence style we build. Homeowners planning an ADU or a detached structure after the fence goes in often need ADU Design & Permitting in Kendall next, so the paperwork gets handled once. We serve the whole Kendall area, including Richmond Heights, Sunset, The Crossings, and Three Lakes.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Iron Fence in Kendall
Most iron fence installs in Kendall take 5 to 10 working days from permit sign-off to final inspection. The fence itself goes up in 2 to 4 days; the rest is fabrication, concrete cure time, and the county inspection. A larger run with masonry piers or an automated gate lands on the longer end. Call (844) 761-9356 for a timeline specific to your property.
In unincorporated Miami-Dade, a fence over 6 feet, or one in a front or side setback, generally needs a permit, and the county reviews product approval on fence systems. We pull the permit and schedule the inspection for you. The only way to know the exact requirement for your lot is a site visit; call (844) 761-9356 and we’ll map it on the free estimate.
Yes, in almost every case. Iron fence work runs along the property line, and we locate the post holes to clear irrigation, pool plumbing, and the footer of any adjacent structure. The one place we stop is if a post lands directly against a stucco wall or a pool cage footing; in that case we set the anchor differently rather than disturb the structure. Call (844) 761-9356 if you have a specific constraint in mind.
Most residential runs land in the $3,500 – $9,000 range, with per-foot pricing from $35 to $110 depending on spec. Gates, masonry piers, permit scope, and the length of the run are the four things that move the number. Every estimate we produce is line-item, with the number you see being the number you pay. Call (844) 761-9356 for a free on-site estimate.
Every fence we install is backed by the 730-Day Done Right Promise, and if the finish, hardware, or alignment isn’t right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Fastener corrosion is the exception worth knowing about; we handle touch-ups under the warranty when the cause is a material defect. Call (844) 761-9356 to schedule your free estimate.
Get your free iron fence estimate in Kendall
Call (844) 761-9356 for a free on-site estimate on an iron fence in Kendall. A live person answers around the clock, so you can schedule as soon as you’re ready. On the visit, we walk the property line, confirm the set-back and height, measure the run, and hand you a written line-item quote with the permit, the finish, and the gate hardware all spelled out. Upfront pricing, no surprises.
Written by the team at Groundwork Construction Co.