Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence Installation in Kendall, FL: What It Costs and How Long It Takes
A vinyl fence in Kendall, FL runs $3500 – $9000 for most residential lots, and a typical 150 – 200 linear-foot privacy run is finished in two to four working days once the Miami-Dade permit clears. The number moves with linear footage, height, gate count, and how much old fencing or root-bound concrete has to come out first. Call (844) 761-9356 for a free on-site measurement and a written line-item estimate.
How We Build a Vinyl Fence in Kendall, Start to Finish
Vinyl looks simple from the street. It isn’t. The panels are only as good as what happens below grade, and in Kendall’s tight, fully built-out lots the prep stage decides whether the fence stays plumb through the first wet season. Here’s the real sequence.
Stage 1: Measure, mark, and call for utility locates (day 1)
We walk the property line with you and confirm exactly where the fence goes, where the gates land, and which side faces the neighbor. Then we call for the free utility locate. That step is non-negotiable in a neighborhood this dense, because irrigation lines, pool plumbing, and old cable runs sit inches under the sod in plenty of Kendall yards. Nothing gets dug until the flags are out and the marks are clear.
Stage 2: Demolition and post layout (day 1 – 2)
Old wood fencing, rusted chain link, overgrown hedges, and the occasional buried concrete footing come out first. We set string lines and stake post centers at even spacing so the panels come out consistent instead of pinched at one end. On a typical Kendall lot this is a half-day to a full day depending on how much has to go.
Stage 3: Digging and setting posts (day 2 – 3)
Posts go into holes dug to depth, set in concrete, and plumbed with a level on two faces. Our technicians have up to 12 years of experience setting fence in South Florida soil, and they’ve learned that a post set shallow looks fine in March and leans by August. Concrete cures before we hang anything. We schedule this deliberately so panels don’t get loaded onto green footings.
Stage 4: Rails, panels, and gates (day 3 – 4)
Rails go on, panels slide into place, and gates get hung with the hardware adjusted for smooth swing and a clean latch. You’ll want to be around at some point in this stage to confirm gate placement and which direction each gate swings. It’s a small decision you’ll live with daily.
Stage 5: Final walk and cleanup (last day)
We walk the run with you, check every post for plumb and every panel for alignment, haul off the old material, and rake the disturbed ground. Anything that isn’t right gets fixed before we leave, and it’s covered in writing under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Vinyl Fence Options You’ll Choose Between in Kendall
Every vinyl fence buyer here faces the same handful of decisions. Here’s the honest read on each.
- Standard privacy panels (6 ft): the most common pick for Kendall backyards. Solid, low-maintenance, keeps neighbors and sightlines handled. The trade-off is wind load: solid panels catch gusts, so the post spacing and footing depth have to be right, not the cheapest version on the quote.
- Racked or stepped panels: ranked panels follow a grade; stepped panels stay level in sections. If your yard has any slope, this changes the look and the labor. Racked reads cleaner on gentle grades.
- Color and finish: white is the default and the easiest to match to a house. Tan, gray, and wood-grain finishes cost more and hide dust and pollen better. In Kendall the sun is unforgiving, so we steer people toward finishes rated for UV exposure rather than the bargain-basement line.
- Decorative tops and picket runs: a picket or semi-private top run along the front and a solid privacy panel behind is a common split for corner lots. Costs more per foot, looks sharper from the street.
- Gates and hardware: walk gates, double drive gates, and self-closing hinge options. Stainless or coated hardware matters here; plain steel latches pit fast in our humidity.
- Post caps and reinforcement: worth the small upcharge. Caps keep water and debris out of the post tops, and a metal-reinforced post resists the leaning that plagues cheap installs.
If your vinyl fence is part of a full Fence Installation in Kendall plan covering the front, sides, and a matching gate run, we quote the whole layout at once so per-foot pricing stays consistent across the property.
What a Vinyl Fence Costs in Kendall, FL
Most vinyl fence jobs here land in the $3500 – $9000 range. A straightforward 120-foot privacy run on flat ground sits near the bottom. A long perimeter with a double drive gate, a sloped run, and old fence to haul off pushes toward the top.
The variables that move the number:
- Linear footage and height: a 4-foot picket run and a 6-foot privacy run don’t cost the same per foot, and every extra 50 feet adds material and digging.
- Old fence removal: tearing out and disposing of an existing wood or chain link fence, including pulling old concrete footings, adds labor.
- Gate count and type: a double drive gate costs meaningfully more than a single walk gate because of the hardware and heavier posts at each hinge.
- Grade and terrain: slopes, tight property lines, and mature root systems all slow installation.
- Material grade: UV-rated, thicker-wall panels and reinforced posts cost more up front and last longer.
A written estimate should spell out linear footage, panel height and style, post spacing, gate count and hardware, removal and disposal, and whether the permit is included. What it usually doesn’t cover: sprinkler or irrigation repair if a line gets hit during digging, or landscaping restoration beyond basic raking. We flag those before work starts so there’s no surprise line item later. That’s what upfront pricing, no surprises, actually means.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall Homes Specifically Do to This Job
Kendall is a hard-built, fully developed pocket of unincorporated Miami-Dade west of the Turnpike, which means nearly every fence here is rebuilding an already-improved lot rather than fencing open ground. The housing stock tells the story: mostly 1970s-to-1990s concrete block and CBS single-family homes with barrel-tile or shingle roofs, plus a ring of newer townhomes and mid-rises along Kendall Drive. Property lines in these tract neighborhoods are tight, and the original fencing is often original to a decades-old build.
The climate treats vinyl well compared to wood and chain link, but the subtropical heat and salt-laden air still show up: hardware pits, gate hinges seize, and white panels fade if they weren’t UV-rated to begin with. After a tropical storm or a bad summer microburst, half the fence calls in these neighborhoods are leaning panels and blown-out gates, and the fix usually comes back to footing depth and post spacing from the original install.
Because this is unincorporated Miami-Dade, a fence over 6 feet or so in height generally needs a county permit and inspection, and the county’s HVHZ product-approval environment means the paperwork question comes up before the price question. Many Kendall HOAs also have their own rules on fence height, color, and style in front-yard runs, so we recommend confirming HOA approval before we order material. If you’re already planning exterior work, homeowners often pair this with Driveway Repair & Replacement in Kendall to finish the curb line, or with Asphalt Driveways & Resurfacing in Kendall when the driveway is the next thing on the list.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Vinyl Fence in Kendall
Most residential vinyl fence jobs in Kendall take two to four working days on site once the permit clears. A short 100-foot run with no removal can wrap in two days; a full perimeter with a double gate and demolition pushes to four. Add a few days for the Miami-Dade permit if one is required. Call (844) 761-9356 and we’ll size the timeline on your actual property line.
Often yes. Fences above roughly 6 feet in unincorporated Miami-Dade typically require a permit and inspection, and height is measured from finished grade. We handle the permit paperwork as part of the job so it’s not yours to chase. Confirm the exact threshold for your property with us on the estimate call at (844) 761-9356.
Yes, with the right hardware and footings. The panels themselves weather well; it’s plain steel hardware and shallow posts that fail first in our climate. We spec coated or stainless hardware, reinforced posts, and post caps to keep water out. Ask about corrosion-resistant hardware on the call to (844) 761-9356.
Every install is covered by our 730-Day Done Right Promise. If something wasn’t done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing. Call (844) 761-9356 to go over the details.
Yes. We come out, measure the property line, and hand you a written line-item estimate covering footage, style, gates, removal, and permitting. Our team covers Kendall and the surrounding neighborhoods. Call (844) 761-9356 to book your free estimate, and see the wider scope on our Fence Installation page.
Get Your Free Vinyl Fence Estimate in Kendall
A free on-site estimate starts with a phone call to (844) 761-9356. We answer with a live person, day or night, and we’ll set a time to walk the property line, measure the run, and talk through panel style, gate placement, and permit timing. You’ll get a written line-item quote, upfront pricing with no surprises, and a crew of background-checked technicians on the day. No hype, just a number you can plan around.
Written by the team at Groundwork Construction Co.