Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Kendall, FL: What It Takes and What It Costs
Impact window and door installation in Kendall usually runs $8,000 – $25,000 for a whole-house package, and most homes here take three to five working days from tear-out to final inspection. The job means replacing single-pane or older laminated glazing with Miami-Dade-approved impact units, pulling the county permit, and passing inspection before the last screw cover goes on. Call (844) 761-9356 to schedule a free on-site estimate, and we’ll measure every opening and hand you a written line-item price.
How the work actually runs, day by day
Impact jobs move in a fixed order, and knowing it keeps you from getting surprised mid-week. Here’s the sequence we follow on Kendall homes.
Stage 1: measure, permit, and product ordering
Day one is measurement and paperwork, not demolition. We measure every opening, confirm which units carry a Miami-Dade NOA number, and file the permit package. Ordering impact units typically takes two to six weeks depending on the manufacturer and whether you’ve chosen a stock size or custom. You decide the glass package, frame color, and opening style at this stage, because changes after the order are costly.
Stage 2: protection and tear-out
On install day the crew lays drop cloths, tapes off interior trim, and pulls the old sashes and frames. Most single-family tear-outs here take half a day to a full day per elevation. You decide nothing during tear-out except whether old units get hauled away or left for you. We haul them.
Stage 3: opening prep and flashing
Old openings rarely arrive square, especially in block walls, so the crew true-up the rough framing, checks the sill for slope, and sets new flashing and sealant. This is the stage that decides whether a unit leaks in five years, and it’s the stage cheap crews rush. It runs a few hours per opening on a clean job, longer where the block was patched.
Stage 4: setting units and sealing
Units get set, shimmed, anchored per the product approval, and sealed at the perimeter. Doors get their thresholds checked for positive drainage and their hardware set. Interior trim goes back on and caulk lines get finished. This is where you’ll notice the difference in how solid a properly anchored impact door feels when it latches.
Stage 5: inspection and walkthrough
We schedule the county inspection, meet the inspector on site, and don’t call the job done until it passes. Final walkthrough covers operation of every unit, latch adjustment, and the label paperwork you’ll want for insurance. Most Kendall jobs finish in three to five days of installation once product is on site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’re actually choosing between
Impact glazing is not one product. The choices below are what really change both the look and the number.
- Glass package: standard laminated impact glass is the baseline; Low-E coated laminated glass adds cost but cuts heat gain, which matters on west-facing windows in Kendall’s afternoon sun.
- Frame material: aluminum frames are the common choice on block homes and hold up well; vinyl units cost less but can be fussier in very large openings. Brands like ViewLux and Therma-Tru sit in the middle of that market.
- Opening style: fixed and single-hung units cost the least; casement and sliding impact units cost more because of the hardware and anchoring.
- Doors: impact-rated entry doors and sliding glass doors run higher than windows per unit, and the hardware and threshold detail is where quality shows.
- Custom sizing: stock sizes save money; custom units in odd 1970s-era openings add cost and lead time, but avoid the filler strips that look wrong on a block façade.
What Impact Windows & Doors cost in Kendall, FL
A full impact window and door package for a typical Kendall single-family home lands between $8,000 and $25,000. What pushes a job toward either end:
- Number and size of openings: a twelve-opening home sits at the low end; twenty-plus openings with wide sliders sits near the top.
- Glass and frame grade: Low-E laminated glass and premium frames add real dollars.
- Existing condition: rotted sills or out-of-square block openings mean repair framing before install.
- Door count: impact sliders and entry doors cost more per unit than windows.
- Permit and inspection scope: Miami-Dade permitting and inspection is part of the written price, never a surprise add-on.
A written estimate should list units by opening, glass spec, hardware, permit, haul-away, and inspection. It should not hide flashing or trim work in a lump sum. Call (844) 761-9356 for an exact quote, estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall homes specifically do to this job
Kendall is a hard-built suburban corner of unincorporated Miami-Dade west of the Turnpike, and most of the housing stock is 1970s-to-1990s concrete block with barrel-tile or shingle roofs. That matters for impact work in three ways. First, block walls don’t move, so openings are stable, but original framing is often out of square after decades of heat. Second, Miami-Dade permitting is strict: every unit needs a product approval number, and inspectors check anchoring and flashing, not just the label. Third, the climate and salt-laden air push hurricane-hardening to the front of most homeowners’ minds. Along Kendall Drive and the tract neighborhoods off it, we regularly see post-storm soffit and fascia damage that leads homeowners to ask about impact units as part of a bigger exterior project. It’s why the permit and NOA paperwork question usually comes before the price question here.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Impact Windows & Doors in Kendall
Three to five working days of installation for a typical home, plus two to six weeks of product lead time. Custom units push that longer. Call (844) 761-9356 and we’ll give you a schedule with your estimate.
Yes. Miami-Dade requires a permit and a product approval for every impact unit installed. We pull the permit and meet the inspector on site, and you get the label documentation for your insurance. Call for the paperwork side of the estimate.
In most cases, yes. We measure the existing opening and order to fit, so no structural change is needed. Repairs to out-of-square framing are the exception, and we price them in the written quote up front.
Typically $8,000 to $25,000 depending on opening count, glass grade, door count, and existing condition. Call (844) 761-9356 for a line-item estimate, free on site.
Every install is covered by the 730-Day Done Right Promise, backed in writing, alongside the manufacturer’s product warranty. If something isn’t right, we make it right. Call for the full warranty details.
Get a free estimate on impact windows and doors in Kendall
We’ll visit your home, measure every opening, and hand you a written, upfront price with no surprises. No-hassle upfront pricing means the number you see is the number you pay. Call (844) 761-9356 to schedule your free estimate for impact windows and doors in Kendall.
Written by the team at Groundwork Construction Co. of The Hammocks.