Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Richmond West, FL: What It Costs and How It’s Approved
An iron fence in Richmond West typically runs $3,500 to $9,000 for a standard residential lot, with most homes landing around $5,000 to $7,000 once posts, panels, and a gate are included. The job takes three to five working days on site, plus the architectural review and permit steps that come first. Call (844) 761-9356 to schedule a free on-site estimate. A live person answers around the clock and we’ll give you a written line-item price before anything is ordered.
How We Run an Iron Fence Job Here, Stage by Stage
An iron fence isn’t a complicated build, but the sequence matters. Skip a step and you can end up tearing out set posts when the HOA or the county has a question. Here’s how the work actually flows.
- Stage 1 – Site visit and boundary check (day 1, about an hour). We walk the lot, measure the run, and confirm where your property line sits against your survey. At this point you decide the fence height (4-foot, 5-foot, or 6-foot is most common) and whether you want a walk gate, a drive gate, or both. Everything downstream depends on these two calls, so we settle them before ordering.
- Stage 2 – Architectural review submission (days 2 to 10, the variable stage). Most gated communities off SW 152nd through SW 168th Streets require ARB approval before a permit is even filed. We prepare the drawing and spec sheet your association needs, list the finish color, and submit. Your part is small: sign the form and, in some cases, attend the review meeting. Approval timelines are set by each association, so this is the one stage we can’t compress.
- Stage 3 – Permit filing and utility locates (days 3 to 7, runs alongside review). We pull the fence permit through Miami-Dade County where your community requires one and call in the free locate before we dig. Any buried irrigation, pool plumbing, or low-voltage lighting gets flagged now, not discovered with a post-hole digger.
- Stage 4 – Layout, demo, and setting posts (roughly two days). We string the line, mark every post at consistent spacing (6-foot panels are standard; 8-foot spans on long runs reduce post count), remove any old fencing, and set posts in concrete. Posts cure before panels go up. You’ll see us checking plumb every few posts – a fence that leans two years out is a layout problem, not a material problem.
- Stage 5 – Panels, gate, and final walkthrough (one to two days). We hang panels, mount the gate, verify it swings freely and latches with a light push, and touch up any finish. Then we walk the finished run with you. Final payment comes after you’ve signed off, not before.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Iron fencing is really a family of products, and the differences aren’t cosmetic. Here’s what actually changes from one quote to the next.
- Mild steel vs. wrought iron. True wrought iron is largely unavailable now; most “iron” fences today are mild steel. That’s fine – it’s stronger than people assume and takes a powder-coat finish well. Ask any bidder which they’re quoting.
- Powder-coat vs. paint. Powder-coating is baked on and holds color far longer in South Florida’s sun and salt-humid air. Standard black is cheap and easy to match. Custom colors cost more but often the deciding factor when an HOA has an approved palette.
- Panel height and picket spacing. 4-foot reads open and friendly. 6-foot gives real privacy and is common on perimeter runs. Tighter picket spacing (4-inch vs. 6-inch) raises cost per linear foot and, on gates, actually matters for keeping small pets in.
- Galvanized vs. non-galvanized core. Galvanized steel resists rust from the inside out. In a humid coastal county, it’s usually worth the upcharge on any run you plan to keep for decades.
- Gate type. A swing gate with a self-closing hinge is standard. Sliding or automated gates add hardware and power and belong in a separate conversation – mention it early so we plan for it.
What Iron Fence Costs in Richmond West, FL
Most Richmond West iron fence projects fall in the $3,500 to $9,000 range. Here’s roughly how that splits.
- Shorter runs (up to about 100 linear feet): lower end, around $3,500 to $5,000.
- Standard perimeter (150 to 200 feet) with a walk gate: mid-range, $5,000 to $7,500.
- Long runs, drive gate, or custom color: upper end, $7,500 to $9,000 and up.
Four things move your number: total linear footage, gate count and type, panel height and picket spacing, and finish grade (standard black powder-coat vs. custom color and galvanized core). Existing fence removal and any tight-access runs add labor.
Your written estimate covers materials, post setting, panels, gate hardware, and cleanup. It gets specific in writing about what’s excluded – usually old fence haul-away if you want it and any landscaping repair after demo. Upfront pricing means the number you see is the number you pay. Call (844) 761-9356 and we’ll put an exact figure in front of you; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond West Homes Specifically Do to This Job
Richmond West was largely built out in the 1990s and 2000s, so nearly every iron fence here is a replacement or an addition on a two-decade-old property, not new construction. That matters in two ways. First, the original fencing – often wood or builder-grade aluminum – is usually at the end of its life and comes out during demo, which is a cost you don’t see on a new build. Second, almost every community along SW 152nd to SW 168th Streets is gated and runs an architectural review, so the ARB submission is a real step in the schedule, not a formality. We’ve seen approvals move quickly and we’ve seen them stall on a color mismatch, which is why we submit a spec sheet with the exact finish, not a verbal description. The county’s HVHZ wind-load and product-approval rules apply to the fence too, so we confirm the product carries the right approval before we order. If your iron fence is part of a full Fence Installation in Richmond West project, we sequence it so the hardscape and gates align from day one. Homeowners often pair this with Patios, Walkways & Pool Decks in Richmond West so the fence line and the outdoor living space are built to the same plan.
Serving Richmond West, FL – Our Local Coverage Area
We serve Richmond West and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Richmond West
On-site work runs three to five working days once the fence is ordered and any architectural review is approved. The review step can add one to three weeks depending on your community, so plan around it rather than against it. Call (844) 761-9356 for a realistic timeline for your lot.
In most Richmond West communities, yes to both – ARB approval first, then the county permit where one is required. We prepare and submit the paperwork for you and confirm the product meets Miami-Dade HVHZ requirements before ordering. Call us with your community name and we’ll tell you what it typically needs.
Usually yes. We set new posts at consistent spacing and remove the old fence during demo, and we call in utility locates first to avoid buried irrigation and pool plumbing. Tight-access runs take more care but don’t change the plan. Call (844) 761-9356 to talk through your layout.
Most projects land between $3,500 and $9,000 depending on run length, gate type, height, and finish. A short run runs near the low end; a long perimeter with a drive gate and custom color runs high. Call (844) 761-9356 for an exact quote – estimates are free.
Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Call (844) 761-9356 and we’ll put the warranty in writing with your estimate.
If you’re planning a larger project alongside the fence, our team also handles ADU Design & Permitting in Richmond West, and you can see our full Fence Installation service for context. We work throughout Richmond West and neighboring areas. Material partners like James Hardie and Wellborn come up on adjoining build work and we source them directly.
Get Your Free Iron Fence Estimate in Richmond West
Call (844) 761-9356 for a free on-site estimate on your iron fence in Richmond West. We’ll walk the lot, measure the run, confirm your HOA’s approved styles and colors, and hand you a written line-item price with no change orders and no surprises. A live person answers around the clock, and every technician arrives background-checked and in uniform.
Written by the team at Groundwork Construction Co.