Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Three Lakes, FL: What the Job Actually Involves
Paver driveways in Three Lakes, FL typically run $7,000 to $18,000 for a standard two-car approach, and most jobs take four to seven working days from demolition to first drive. That covers excavation, a compacted aggregate base, edge restraint, the pavers themselves, and polymeric joint sand. The number that matters more is the base depth, because Three Lakes sits on the flat, sandy western Kendall ground where a shallow base fails fast. Call (844) 761-9356 and we’ll walk your driveway and quote it in writing.
From Bare Sand to Finished Drive: How We Build a Paver Driveway
Paver work is base work. The pavers are the visible 20 percent. Here’s the sequence we run, and where you make decisions.
Day 1: Layout, demo, and stabilization
We mark the finished grade and confirm the slope away from the garage slab, because water running into a Three Lakes garage is one of the most common complaints we hear about older driveways. Existing concrete or worn asphalt comes out and hauls away. If we find soft spots, root intrusion, or old utility patches, we over-excavate and stabilize before anything else goes down. You decide nothing on day one except where the car goes during the work.
Day 1 – 2: Excavation and base
We excavate to a depth that accounts for the paver thickness plus the compacted base, which for a residential driveway is normally 6 to 8 inches of limerock or crushed aggregate. It goes down in lifts and gets compacted each time. This is the stage that determines whether your driveway still looks flat in ten years.
Day 2 – 3: Edge restraint and bedding layer
Concrete or restrained edge gets set along the borders, then a screeded bedding sand layer goes down at a consistent depth. This is where you’ll have already chosen a border pattern or a soldier course if you want one. Decide that at the estimate, not on install day; changing pattern mid-job moves the price.
Day 3 – 4: Paver installation
Pavers get laid in the pattern you picked, cut at the edges, and compacted into the bedding. Cuts at the garage apron and the street transition are the visible craftsmanship marker. Ask to see where the cuts land before the crew starts laying.
Day 4 – 5: Joint sand, cleanup, and walkthrough
Polymeric sand goes into the joints, gets compacted, and gets watered in to set. We blow off the site, haul debris, and walk the finished driveway with you. For a larger Three Lakes driveway with a wide apron and a side pad, add two days. If this is part of a full Driveway & Pavers in Three Lakes project that also touches a walkway or patio, we phase it so the driveway is usable first.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the material conversation comes down to five decisions. Here’s the honest version of each.
- Concrete pavers vs. clay brick pavers. Concrete pavers are the standard choice here: lower cost, wide color range, and they hold up to South Florida sun. Clay brick costs more but the color doesn’t fade. For a Three Lakes driveway, concrete pavers are usually the sensible call unless you specifically want brick.
- Paver thickness. 60mm is the residential driveway standard. 80mm is overkill for a car but worth discussing if a heavy truck or RV parks on it regularly.
- Pattern. Herringbone and running bond interlock best under tire traffic. Large-format or basketweave looks cleaner but shifts more on a driveway. Herringbone is the safe recommendation.
- Color and finish. Standard, tumbled (softer, older look), or a premium face-mix line from a manufacturer like Belgard. Premium color lines add roughly 15 to 25 percent to material cost and hold their tone longer in direct sun.
- Border and layout. A contrasting border course adds visual definition and a modest upcharge. A curved apron or a widened side pad for a third vehicle is a layout decision that changes square footage and price.
Sealing is a separate conversation. Some homeowners want it right away; many wait a season. It’s covered on its own page, and it’s not required for the driveway to perform.
What Paver Driveways Cost in Three Lakes, FL
Plan on $7,000 to $18,000 for paver driveway installation in Three Lakes. A tight single-car replacement sits at the low end; a wide two-car drive with a border, curves, and a side pad lands at the top.
Here’s what actually moves the number:
- Square footage. This is the biggest lever. Pavers are priced per square foot installed, so a 400 sq ft driveway and an 800 sq ft driveway are different jobs entirely.
- What’s under it. Removing sound concrete is straightforward. Removing failed concrete with root damage, or excavating deeper because of soft fill, adds labor and disposal.
- Base depth and grading. A driveway that needs significant regrading for drainage costs more than one that sits close to existing grade.
- Paver selection. Premium color lines and specialty shapes cost more per square foot than standard concrete pavers.
- Access and staging. A tight Three Lakes lot where the crew can’t stage materials close to the work adds handling time.
A written estimate from us breaks out demolition, base, pavers, edge restraint, joint sand, disposal, and any permit cost as line items. What it typically doesn’t include: irrigation or landscape repair if lines run under the drive, and any sealing you may want later. Our Driveway & Pavers service covers the wider scope if you’re adding more hardscape at the same time. Pricing is upfront, the number you see is the number you pay, and projects over $10,000 qualify for $1,000 off plus 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterWhat Three Lakes Homes Specifically Do to This Job
Three Lakes is a built-out 1980s and 1990s suburban pocket of western Kendall, ZIP 33186. Almost nothing here is new construction, which shapes the work. The typical driveway we replace is original concrete on a Mediterranean-style concrete-block home with a barrel-tile roof, and it has been patching and cracking for years. The original slab was often poured thin, and after three decades of subtropical sun and a May-to-November storm season, the joints have opened and the surface has spalled. That’s why the base rebuild matters here: dropping pavers over a tired slab without addressing what’s beneath it just moves the failure up a few inches.
Permitting runs through Miami-Dade County, and if the driveway touches the right-of-way, a county right-of-way permit is part of the job. Three Lakes HOA and villa communities often have their own rules on paver color and pattern that need approval before demo starts, so we ask for those documents early. Clustered re-roofing on the same streets also affects scheduling, because crews working the neighborhood are already staged nearby. We cover Three Lakes and the surrounding western Kendall communities, and you can see the full area on our Three Lakes page.
Serving Three Lakes, FL – Our Local Coverage Area
We serve Three Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Three Lakes
Most paver driveways in Three Lakes are finished in four to seven working days from demo to walkthrough, and a large driveway with a border and side pad takes closer to seven. Weather is the main variable, since the storm season can add rain days. Call (844) 761-9356 for a schedule based on your specific driveway.
Yes, most replacements need a permit through Miami-Dade County, and any work in the county right-of-way needs a separate right-of-way permit. We pull the permits and coordinate inspections as part of the job. Call (844) 761-9356 and we’ll confirm what your property requires.
Sometimes, but only when the existing slab is structurally sound and the added height won’t create a threshold or drainage problem. In a 30-year-old Three Lakes home, that’s the exception, not the rule. We’ll tell you honestly at the estimate which side of that line your driveway is on.
Paver driveway installation in Three Lakes runs $7,000 to $18,000, depending mainly on square footage, base condition, and paver selection. That’s for a complete job with base, edge restraint, and joint sand. Call (844) 761-9356 for a line-item quote; estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Material warranties come separately from the paver manufacturer and are handled through them. Our technicians have up to 12 years of experience, and they arrive background-checked and in uniform. Call (844) 761-9356 with warranty questions.
Get a Free Paver Driveway Estimate in Three Lakes
Call (844) 761-9356 and a live person answers, any hour. We’ll set a time to walk your Three Lakes driveway, measure it, check the base and drainage, and talk through pattern and color options. You get a written, line-item quote with no change orders and no surprises. If you’re also planning a guest suite, homeowners often pair this with ADU Design & Permitting in Three Lakes or a Garage Conversion ADU in Three Lakes and want the drive widened to match.
Written by the team at Groundwork Construction Co.