Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Three Lakes, FL: What It Costs and How It’s Built
An iron fence in Three Lakes, FL typically runs $3,500 – $9,000 for a residential property line, and most jobs wrap up in two to four days of on-site work once materials and permits are set. That range covers everything from a light 4-foot ornamental iron run along a courtyard to a heavier 6-foot estate-style fence with matching gates. Call (844) 761-9356 for a free on-site estimate and a written line-item quote, so you know the number before a single post is set.
How We Build an Iron Fence in Three Lakes
Iron fencing rewards planning. Skip a step and you’ll be resetting posts in Miami-Dade’s limestone and coral rock after the first storm season. Here’s the sequence we work through on a Three Lakes job.
- Stage 1: Site walk and layout (Day 1, roughly 1 hour). We measure the property line against the plat, flag utility locates, and mark gate positions. You decide the fence height, gate swing direction, and where the driveway or walkway opening lands. On corner and interior lots, this is where we confirm setbacks against your HOA’s approved site plan.
- Stage 2: Permit confirmation and material order (Days 1 – 2). We confirm whether your particular run needs a fence permit or is exempt under Miami-Dade’s height and setback rules, and order the iron panels, posts, and hardware in the finish you’ve selected. You approve the exact spec sheet before anything is fabricated or shipped.
- Stage 3: Demo and prep (Day 2 – 3). If an old fence or hedge is in the way, we remove it and haul it off. Posts holes are dug to depth and set in concrete; on the coral rock common under older Three Lakes lots, that means a rock bit and patience, not just a shovel. This stage is the one that runs long if the ground is rocky.
- Stage 4: Posts, panels, and gates (Day 3 – 4). Posts go in first and cure, then panels are hung and leveled, then gate hardware and hinges are fitted and adjusted. You walk the run with us and confirm the gate swings clean before we touch the touch-up paint.
- Stage 5: Final inspection and finish (last half-day). We touch up weld points and scratches, verify latches and self-closing hardware, and walk through the finished fence with you. Any permit inspection gets scheduled and we stand on site for it.
If your fence is part of a full Fence Installation in Three Lakes project, the sequencing and permit handling are the same, just with more scope on the front end.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Iron Fence Options You’ll Choose Between
Iron fence decisions come down to material grade, style, and finish. Here’s what those choices actually mean.
- Wrought iron vs. ornamental steel. Traditional wrought iron is heavier, hand-forged, and priced at the top of the range; it lasts essentially indefinitely with maintenance. Ornamental steel (sometimes called tubular steel) is lighter, more common on suburban lots, and easier on the budget. It’s still durable, but it’s a stamped or welded steel product rather than forged iron.
- Height and post spacing. A 4-foot courtyard-style run costs less than a 6-foot privacy-height iron fence, mainly because of more panels, taller pickets, and heavier posts. Wider post spacing saves material; tighter spacing reads more formal and adds stiffness.
- Finish. Powder-coated black is the standard in Three Lakes because the salt air eats exposed finishes fast. Hot-dip galvanized undercoat with a powder coat on top is the upgrade that holds up to the coastal humidity. Bare, uncoated iron will rust quickly here.
- Pickets and details. Plain pickets are the value play; finials, scrollwork, rings, and custom top rails add per-foot cost and lead time. If your HOA requires a specific look, check the architectural guidelines before you fall in love with a design.
- Gates. Walk gates are standard on most runs. Driveway gates can be manual swing, sliding, or automated, and automating one adds real cost and an electrical rough-in. For gate and panel hardware, a brand like Barrette is a solid choice for reliable moving parts.
What an Iron Fence Costs in Three Lakes, FL
Residential iron fence in Three Lakes runs $3,500 to $9,000. That’s the honest range for a typical single-family lot, and the number you land on depends on five variables.
- Linear feet and height. A shorter 4-foot run at the low end, a long 6-foot perimeter with multiple gates at the top.
- Material grade. Ornamental steel sits lower; true wrought iron and heavy-gauge steel sit higher.
- Existing conditions. Demo of an old fence, hedge removal, and rocky coral ground all add labor hours.
- Gate count and automation. Each additional walk gate adds cost; an automated driveway gate is a separate scope with power and hardware.
- Permit and inspection scope. A run that triggers a permit and an inspection is more than an exempt replacement, and the permitting hours are real.
Your written estimate should itemize linear feet, posts, panels, gate hardware, finish, demo, and permit fees, and it should state a fixed price. What usually isn’t included: landscaping removal beyond the fence line, major grading, utility relocation, and automating a gate if it wasn’t quoted. Upfront pricing, no surprises, is the standard: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Three Lakes Homes Specifically Do to This Job
Three Lakes is a built-out 1980s and 1990s suburban pocket of western Kendall, and nearly every iron fence here replaces something that’s already there: a rusted original iron run, a tired wood privacy fence, or an overgrown hedge acting as a property line. That’s a different job than a new-construction install. The concrete-block Mediterranean homes and tight HOA lots mean we’re working around existing irrigation lines, pool equipment pads, and walking-distance neighbor property, and stucco or paver surfaces mean we plan post placement to avoid cracking. Because Three Lakes falls under Miami-Dade’s product-approval and inspection regime, fence height and setback get checked against the county code, and your HOA gets checked against its own architectural rules, usually a different standard with its own approval timeline. Salt-laden air and the May through November storm season make a quality powder coat and galvanized undercoat non-negotiable here; bare steel rusts fast in Miami-Dade humidity. On older lots, we also watch for aging irrigation and cast-iron or PVC utility runs under the fence line. We cover all of Three Lakes including the 33186 ZIP.
Serving Three Lakes, FL – Our Local Coverage Area
We serve Three Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Three Lakes
Most residential iron fence jobs take two to four days of on-site work, plus the fabrication lead time before that. Permit approval, if your run needs one, can add a week or more depending on Miami-Dade’s queue. Your written schedule spells out each phase so you know exactly when we’re on site. Call (844) 761-9356 to get a realistic timeline for your lot.
It depends on height, setback, and whether it’s a replacement of an existing fence. Shorter runs on interior lots are frequently exempt; taller or corner-lot fences usually need a Miami-Dade permit, and most Three Lakes HOAs require architectural approval on top of that. We confirm the actual requirement for your lot before work starts and pull the permit when it’s needed. Call (844) 761-9356 for a free estimate.
Residential iron fence in Three Lakes typically runs $3,500 to $9,000, driven mainly by linear feet, fence height, material grade, and gate count. Ornamental steel at the low end, wrought iron and heavy-gauge with an automated gate at the high end. Call (844) 761-9356 for an exact quote; estimates are free.
No, not on a fixed-price estimate. Our written quote locks the scope, and any change (added gate, expanded run, unforeseen rock) is quoted and approved before we proceed. No change orders after the fact. Call (844) 761-9356 to get your line-item quote.
Every iron fence project is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship and installation. Material manufacturer warranties pass through to you on top of that. Call (844) 761-9356 to talk through the coverage in detail.
Get a Free Iron Fence Estimate in Three Lakes
Call (844) 761-9356 and we’ll schedule a free on-site estimate for your iron fence in Three Lakes. You’ll get a written, fixed-price quote with the linear footage, finish, and gate hardware itemized. A live person answers, and if the fence is part of a wider outdoor plan, homeowners often pair this with Patios, Walkways & Pool Decks in Three Lakes or ADU Design & Permitting in Three Lakes. You can also review our Fence Installation service before the call.
Written by the team at Groundwork Construction Co.