Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Gutters & Accessories in Three Lakes, FL: What It Takes and What It Costs
Gutters & Accessories work in Three Lakes usually means replacing failed aluminum or brown-stained fascia-mounted runs on a 1980s or 1990s concrete-block home with seamless 6-inch K-style aluminum, and the job runs $1,400 to $4,800 installed depending on linear footage, downspout count, and whether the fascia behind the old gutters is sound. A typical single-story Three Lakes home with 160 to 200 feet of run is done in one day, while two-story and screen-enclosure tie-ins take two. Call (844) 761-9356 and we’ll walk the roofline with you before you commit to anything.
How We Run a Gutter Job in Three Lakes, Stage by Stage
Gutter replacement looks simple from the ground. It isn’t, especially on homes where the fascia has been soaking for a decade. Here’s the actual sequence.
- Stage 1: Roofline walk and measurement (about 45 minutes). We’re on the roof, not just the ladder, checking drip edge condition, fascia rot, and where the downspouts can realistically discharge. On Three Lakes lots, the answer is rarely “straight down to the slab” – most driveways and patios are within a few feet of the wall, so you’ll decide whether to run underground drainage or use a splash block. That decision happens here, before any material is ordered.
- Stage 2: Removal and fascia assessment (2 to 4 hours). Old gutter sections come down, and this is where surprises surface. Aluminum coil stock hides soft wood. If the fascia shows rot or the original installer face-nailed through a decaying subfascia, we photograph it and quote the repair before proceeding – no surprise line item after the fact. On a 30-year-old Three Lakes home, expect roughly a one-in-three chance of some fascia repair.
- Stage 3: Fascia repair or wrap (half a day, if needed). Soft wood gets cut out and replaced; sound wood gets aluminum fascia wrap so the new hangers have something solid to bite into. You’ll choose between a color-matched wrap and a plain mill finish that the gutter covers anyway.
- Stage 4: Seamless gutter forming and hang (3 to 5 hours). We form the runs on site to the exact measured lengths, so there are no mid-run seams that fail in the first storm season. Hangers go on 24 inches on center, screwed – not nailed – into the fascia, with hidden hangers on the visible face. You pick the color and profile before we form; once it’s extruded, it’s yours.
- Stage 5: Downspouts, screens, and water test (2 hours). Downspouts get fastened with standoffs, leaf screens or guards go in if you’ve chosen them, and we run water from a hose at the high point of each run to watch the pitch. Water that pools or overshoots gets corrected on the spot, not on a callback.
Across the whole job, plan on one day for most single-story Three Lakes homes and two days for two-story or enclosed-lanai tie-ins. Nothing in this scope touches your roof covering, which matters: if a roofing issue comes up during the walk, that’s a conversation for our Roofing side, not a reason to tear into a sound roof to hang gutters.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Gutter work is mostly a materials decision. Here’s what actually gets picked in Three Lakes and why.
- Seamless aluminum, 6-inch K-style. The default for a reason: formed on site to your exact run lengths, no seams, and a color match close to the stucco or trim. Standard for most Three Lakes homes and the best value per linear foot.
- 5-inch vs. 6-inch profile. Five-inch is cheaper and fine on a small hip roof with short runs. Six-inch moves roughly half again as much water and holds up better under South Florida downpours. On homes with a large roof plane draining to one side, 6-inch is the honest recommendation.
- Aluminum vs. steel vs. copper. Aluminum won’t rust and handles the salt air fine. Galvanized steel is tougher against ladders and debris but will eventually rust at any scratch. Copper lasts decades and patinas, at roughly three to four times the aluminum price – worth it on a high-visibility front elevation, rarely worth it elsewhere.
- Leaf guards and screens. Basic aluminum or stainless mesh screens keep out the big stuff. Micro-mesh guards block nearly everything but cost more and need occasional brushing. In Three Lakes, with oaks and palms both nearby, most homeowners choose at least a screen on the runs under trees.
- Underground drainage vs. splash blocks. Underground PVC to a pop-up emitter looks cleaner and keeps water off the slab, but it adds trenching cost and needs a workable slope. Splash blocks are cheap and effective where the yard drains away from the house.
You’ll also pick the color, and here the finishes stack up the same way on every job: standard factory colors are quick and inexpensive, while custom-baked matches to a specific stucco tone run a bit more and add lead time.
What Gutters & Accessories Costs in Three Lakes, FL
Typical Three Lakes gutter replacement lands between $1,400 and $4,800 installed. A single-story home with 160 feet of seamless aluminum and a handful of downspouts sits near the low-middle. Two-story runs, copper, micro-mesh guards, and underground drainage push toward the high end.
| Line item | Typical range |
|---|---|
| Seamless aluminum gutter, per linear foot | $6 – $12 |
| Downspouts, per linear foot | $4 – $9 |
| Leaf guards / screens, per linear foot | $2 – $8 |
| Fascia repair or wrap | $300 – $900 |
| Underground drainage run | $400 – $1,200 |
What moves the number, in plain terms: total linear footage and roofline complexity (more corners and valleys mean more fittings and more time), existing fascia condition (rot is the single biggest wildcard), the profile and material grade you choose, whether you add guards and underground drainage, and permit scope if work touches structure. What’s included in a written estimate: removal and disposal of the old gutters, seamless forming and hanging, downspouts, sealant, and the water test. What often isn’t: fascia repair if rot is found mid-job (we quote it before proceeding), underground trenching, and repainting where removed hardware scuffed the trim.
See the difference
Before
After
Before
After
Before
AfterWhat Three Lakes Homes Specifically Do to This Job
Three Lakes is a built-out 1980s and 1990s pocket of western Kendall, ZIP 33186, and that age bracket shapes this work more than anything else. These are Mediterranean-style concrete-block homes with stucco walls and barrel-tile roofs, and the original aluminum gutters on many of them are now 30-plus years old – brown-stained, pitted, and pulling loose from fascia that’s been wet for years. Replacing a roof is a permit-and-inspection event here, and re-roofing in clusters after a named storm means crews are booked solid; we plan gutter work around that reality so your fascia isn’t left exposed. If the wider scope needs attention, that’s a job for Roofing in Three Lakes, and we’ll say so plainly rather than stretch a gutter job into something bigger. Because Miami-Dade’s High-Velocity Hurricane Zone rules govern attachments and product approvals, hangers and fasteners get selected to hold under storm-season wind, not just to look right. HOA architectural review is the other constant: color and profile changes to a visible elevation usually need approval, so we help you submit a compliant color match before we form a single foot of gutter.
Serving Three Lakes, FL – Our Local Coverage Area
We serve Three Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Gutters & Accessories in Three Lakes
Most single-story Three Lakes homes are done in one day, and two-story or lanai-tied homes take two. The variable is fascia condition – if we find rot after removal, the repair adds half a day, and we quote it before continuing so you’re never surprised.
Gutter replacement alone typically doesn’t require a separate permit, but any HOA or architectural-review approval for a visible color or profile change is a different matter. We help you confirm and submit the color match so the finished work passes community standards, not just inspection.
Yes – proper gutter work hangs from the fascia, not the roof covering, so a sound roof stays untouched. We anchor to the fascia and avoid prying on tile edges. If the walk turns up roof trouble, our roofing side handles it separately, and we’ll tell you rather than fold it into the gutter bill.
Plan on $1,400 to $4,800 installed for a typical Three Lakes home, with seamless aluminum at $6 to $12 per linear foot, guards adding $2 to $8, and fascia repair $300 to $900 if needed. Call (844) 761-9356 for an exact quote – estimates are free.
Every gutter job is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space – if it’s not done right, we make it right. Materials carry their own manufacturer warranties on top of that.
Get a Free Estimate for Gutters & Accessories in Three Lakes
We’ll walk your roofline, measure the run, check the fascia, and hand you a written line-item estimate – upfront pricing, no surprises. If your community needs architectural review, we’ll help you match a color that passes. Call (844) 761-9356 for your free estimate on Gutters & Accessories in Three Lakes, and if you’re planning a bigger exterior refresh, homeowners often pair this with Sliding & Patio Doors in Three Lakes or Impact Garage Doors in Three Lakes. We work throughout Three Lakes and the surrounding Kendall communities.
Written by the team at Groundwork Construction Co.