Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Kendale Lakes, FL: What It Involves and What It Costs
Metal roofing in Kendale Lakes runs $15,000 to $40,000 for a typical single-family home, and most jobs take two to four weeks from tear-off to final inspection. The number depends on roof size, panel type, whether the deck needs repair, and how Miami-Dade County’s product-approval and inspection process plays out on your specific address. Call (844) 761-9356 for a free on-site estimate and a written line-item quote before you commit to anything.
How We Install Metal Roofing in Kendale Lakes, Step by Step
Every metal roof we install in Kendale Lakes follows the same five-stage sequence. The order doesn’t change. The timing does, based on the size and condition of the roof.
Stage 1: Inspection and written scope (day 1)
We walk the roof and the attic, check the decking for soft spots and old water damage, and measure the actual square footage. You get a written scope with line-item pricing, not a lump-sum handshake. This is also when we confirm whether your home’s roof structure can take the panel weight and whether any decking needs replacement before panels go on. Most roofs in the 1970s-90s CBS homes around 33183 hold up fine, but we don’t assume that. We check.
Stage 2: Permit filing and product approval (days 2 – 10)
Metal roofing in Miami-Dade County requires a building permit, and the panel system must carry a current Miami-Dade product approval number. That’s not optional, and it’s not negotiable with an inspector. We file the permit, submit the product approval documentation, and schedule the inspection sequence. This is typically the longest gap in the project because it depends on the county, not on us. You decide nothing here except to sign the permit application. We handle the filing and the follow-up.
Stage 3: Tear-off and deck prep (days 1 – 3 of active work)
Old shingles or tiles come off, the deck gets inspected, and any rotten sheathing is replaced. On 30- to 50-year-old Kendale Lakes homes, we regularly find soft decking near valleys, chimneys and skylights, and we price that repair in the original estimate so it’s not a surprise mid-job. We also check the roof-to-wall connections and tie-downs while the deck is open, since Miami-Dade’s post-Andrew wind requirements apply to any re-roof.
Stage 4: Underlayment and panel installation (days 3 – 10)
High-temperature synthetic underlayment goes down first, then the panels, then trim, ridge caps and fasteners. Panel layout is where the quality shows: straight lines, correct overlap, and fasteners driven to spec. A metal roof that’s installed fast is a metal roof that leaks in two years. We take the extra day to get the panel lines right.
Stage 5: Final inspection and walkthrough (days 10 – 14)
The county inspector signs off, we walk the roof with you, and you get the warranty documents in writing. That includes the 730-Day Done Right Promise on our workmanship. If something isn’t right, we come back and fix it. That’s the whole point of a written warranty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Choose Between
Metal roofing isn’t one product. It’s a family of systems with real differences in cost, lifespan and appearance. Here’s what most Kendale Lakes homeowners weigh:
- Standing seam panels: The premium option. Concealed fasteners, cleaner lines, and the best wind performance. Runs toward the high end of the $15,000 – $40,000 range. Suits homeowners who plan to stay long-term and want the roof to outlast them.
- Exposed-fastener panels (screw-down): The budget-friendly metal option. Faster to install and lower cost. The trade-off is visible fasteners and washers that need checking over time, especially in South Florida’s UV and rain.
- Stone-coated steel: Metal panels with a stone granule finish that mimics tile or shingle. Pairs well with the 1970s-90s stucco homes common here because it matches the original look without the weight of real tile.
- Color and finish: Kynar 500 or similar factory finishes hold color through Miami-Dade’s UV load far better than painted-on finishes. Ask what finish is on the panel, not just what color it is.
If the metal roofing is part of a wider project, such as structural repair or a full re-roof plan, this fits inside our Roofing in Kendale Lakes scope. Homeowners often pair this with Impact Windows & Doors in Kendale Lakes so the whole envelope meets current wind code in one permit cycle.
What Metal Roofing Costs in Kendale Lakes, FL
Metal roofing in Kendale Lakes runs $15,000 to $40,000 for a standard single-family home. Here’s what pushes a job toward the low or high end:
| Factor | Low end | High end |
|---|---|---|
| Roof size (squares) | Smaller ranch homes | Larger two-story homes |
| Panel type | Exposed fastener | Standing seam |
| Deck condition | Solid original deck | Sheathing replacement needed |
| Roof complexity | Simple gable | Hips, valleys, dormers |
| Permit and inspection scope | Standard re-roof | Structural tie-down upgrades |
A written estimate from us includes tear-off, disposal, deck inspection and repair allowance, underlayment, panels, trim, fasteners, permit filing and final inspection. It does not include structural repairs discovered after the deck opens up, and we tell you that upfront so there’s no surprise. Upfront pricing means the number you see is the number you pay for the scope we wrote. If you’re planning this alongside other work, our Roofing service page covers the wider project picture.
See the difference
Before
After
Before
After
Before
AfterWhat Kendale Lakes Homes Specifically Do to This Job
Kendale Lakes is a build-out Kendall subdivision. Nearly every construction project here is a remodel or rebuild on a fully developed lot, not a new build. That means the metal roofing work we do around 33183 is almost always a re-roof on a 1970s-90s concrete block and stucco home, and the roof deck you’re working over has been through 30 to 50 years of South Florida sun, rain and hurricane seasons. We routinely find soft decking, rusted-out nail heads and failing underlayment on these homes, and we price the repair allowance into the estimate rather than discovering it mid-job.
The Miami-Dade permitting reality matters here too. Metal roofing panels need a current product approval, and the inspection sequence includes a dry-in inspection before panels go on. On homes in the Kendall subdivisions near 33183, we also check the roof-to-wall tie-downs since post-Andrew wind requirements apply to any re-roof. If you’re covering the full Kendale Lakes area, we’ll tell you straight what your specific address needs before anyone signs anything.
One more local pattern: homeowners often pair a metal roof with Window Replacement in Kendale Lakes, because a wind-mitigation permit for one can open the door to the other. If you’re looking at Silestone or Caesarstone countertops in the kitchen remodel, that’s a separate conversation, but we hear from a lot of Kendale Lakes families doing the roof and the interior in the same year.
Serving Kendale Lakes, FL – Our Local Coverage Area
We serve Kendale Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Kendale Lakes
Most metal roofing jobs in Kendale Lakes take two to four weeks from tear-off to final inspection. The permit approval phase can add a week or two depending on county scheduling, so the total calendar time is often four to six weeks. Call (844) 761-9356 for a timeline based on your specific roof.
Yes. Miami-Dade County requires a building permit for any metal roofing installation, and the panel system must carry a current Miami-Dade product approval number. We file the permit and handle the inspection sequence as part of the job, so you’re not chasing paperwork.
In most cases, yes. A standard re-roof doesn’t require moving plumbing or structure. Structural work only comes up if the deck inspection or tie-down check reveals an issue, and we flag that in the written estimate before work starts, not after.
Metal roofing in Kendale Lakes runs $15,000 to $40,000, with standing seam at the high end and exposed-fastener panels at the low end. Deck repairs, roof complexity and tie-down upgrades can move the number. Call (844) 761-9356 for an exact quote – estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise. The metal panels themselves carry the manufacturer’s warranty, and we hand you those documents at the final walkthrough so you’re not relying on a verbal promise.
Get a Free Metal Roofing Estimate in Kendale Lakes
Call (844) 761-9356 to schedule a free on-site estimate for metal roofing in Kendale Lakes. We’ll walk the roof, check the deck and tie-downs, and give you a written line-item quote with the permit scope spelled out. Live person answers the phone, day or night. No voicemail, no waiting until Monday. You’ll know exactly what the job costs and what’s included before you decide anything.
Written by the team at Groundwork Construction Co.