Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Kendall West, FL: What It Costs and How the Job Runs
Metal roofing in Kendall West typically runs $15,000 to $40,000 for a full residential installation, and most homes here are finished in 5 to 10 working days once permits clear. That figure depends on roof size, panel type, and how much deck and trim repair the existing roof hides underneath. Call (844) 761-9356 and we’ll walk your roof, measure it, and put an exact number in writing before anything is ordered.
How a Metal Roof Goes On, Stage by Stage
Metal isn’t a one-day swap, and anyone who tells you otherwise is skipping steps that matter in South Florida weather. Here’s the real sequence, with the decisions you’ll be making along the way.
Day 1: Tear-off and deck inspection
We strip the existing shingle or tile down to the deck, usually a full day for a standard Kendall West single-family home. Then comes the part that changes budgets: we inspect the plywood or OSB sheathing for soft spots, delamination, and water staining from past underlayment failures. You see photos of anything that needs replacing before we touch it. Rotten decking gets swapped at that point, because new metal over a failing deck is money thrown away.
Days 1-2: Underlayment and edge metal
Once the deck is sound, we install the high-temperature synthetic underlayment, drip edge, and eave trim. You decide here, or earlier at the estimate, whether you want a peel-and-stick secondary water barrier under the field of the roof. In a wind-driven rain climate we usually recommend it, and it adds to the price. This stage is where flashing details at valleys, walls, and penetrations get built, and it’s the single biggest predictor of whether a metal roof stays dry.
Days 2-4: Panel installation
The panels go up in runs, fastened to the deck and purlins according to the wind-uplift engineering for your roof. You’ll have already chosen panel style and color by now. We set panels with consistent overlap and screw placement, checking alignment every few courses, because a metal roof that looks wavy from the street is a fastening problem, not a cosmetic one.
Days 4-6: Ridge, hips, and trim
Ridge caps, hip caps, gable trim, and vent closures get installed to close the system. This is the fussy detail work, and it’s where a lot of cheap metal roofs leak. You don’t have decisions to make here unless a vent or skylight needs relocating, which we’d flag during the walkthrough.
Days 6-10: Final inspection, cleanup, and punch list
We run the punch list, magnet-sweep the yard and driveway for fasteners, haul off debris, and meet the inspector. You get a walkthrough of the finished roof, the warranty paperwork, and the manufacturer documentation. Any touch-ups happen before we call the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Panel Types and Finishes: What You’re Actually Choosing Between
The metal roofing market splits into a few families, and the right one depends on your roof pitch, your budget, and how much you care about the look from the street.
- Exposed-fastener 5V crimp panels: The most economical option, with visible screws through the panel. Fine for sheds, carports, and utilitarian roofs. Not the choice for a main house you plan to keep for decades, because screw grommets are the first thing to fail.
- Standing seam panels: Concealed fasteners, raised seams, the premium look. This is the system most Kendall West homeowners end up choosing for a primary roof, and it handles wind uplift and heavy rain better than anything else on the list. It also costs the most per square.
- Stone-coated steel: Metal stamped to mimic tile or shake, with a granular coating. A strong fit for homes in the Mediterranean-style subdivisions where a bare metal look would clash with the neighborhood. It weathers well but the coating can chip on impact, so it’s worth thinking through if you have overhanging oaks.
- Aluminum vs. steel: Steel with a quality finish is the value pick. Aluminum costs more but shrugs off the salt air if your lot is closer to the coast; for most of 33193, steel works fine.
- Color and finish: Kynar-based finishes hold color better under the South Florida sun than basic painted finishes. Dark colors absorb more heat; lighter colors reflect it and keep attic temperatures down.
If your project includes facade work alongside the roof, our team also handles James Hardie siding and trim, and the same crew coordination keeps the schedule tight.
What Metal Roofing Costs in Kendall West, FL
Expect $15,000 to $40,000 for a full metal roof installation in Kendall West, with most single-family homes landing in the middle of that band. Here’s what moves the number:
- Roof size and complexity: Square footage is the base, but hips, valleys, dormers, and multiple roof planes add labor and trim metal. A simple gable runs cheaper than a chopped-up Mediterranean roofline.
- Panel system: Exposed-fastener runs lowest. Standing seam and stone-coated steel sit at the top of the range.
- Deck and structural repairs: Soft sheathing, rotted fascia, or out-of-square framing get fixed before panels go on. This is the variable that most often pushes a job above the initial estimate, and it’s why we open the roof and show you before we commit.
- Underlayment and flashing upgrades: A peel-and-stick water barrier and upgraded flashing add cost but improve long-term performance.
- Permit and inspection scope: Broward-to-Miami-Dade wind-mitigation code and High-Velocity Hurricane Zone product approvals drive documentation and inspection requirements, which add to permit cost and timeline.
A written estimate from us includes tear-off, decking replacement up to the agreed allowance, underlayment, panels, trim, fasteners, cleanup, and permit fees. It typically excludes structural framing repairs beyond the deck, skylight replacement, and any work on gutters, which we quote separately.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall West Homes Do to This Job
Kendall West is a west-edge subdivision built out mostly between the 1980s and 2000s, and the roofing stock shows it. Most homes here are CBS with stucco and barrel-tile or shingle roofs, many from the late ’80s and ’90s, now at the age where underlayment fails before the tile does. Out along the western edge of 33193, where lots back against the Everglades conservation buffer, drainage and flood-elevation review come into play on any roof work that touches the slab or changes the roofline. HOA architectural review is the other reality here: most subdivisions require color and panel-style approval before installation, so we factor approval time into the schedule. Working in Kendall West means knowing which communities expect that paperwork early and which don’t.
Serving Kendall West, FL – Our Local Coverage Area
We serve Kendall West and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Metal Roofing in Kendall West
Most homes finish in 5 to 10 working days once the permit is issued, though permitting itself can add a few weeks depending on inspection scheduling. Larger roofs with complex geometry or structural repairs stretch toward the longer end. Call (844) 761-9356 for a timeline based on your actual roof.
Yes. Metal roofing requires a permit in Miami-Dade County, and the work must meet High-Velocity Hurricane Zone product approval requirements. We pull the permit and handle the inspection process, so you’re not chasing paperwork. Call (844) 761-9356 to schedule your free estimate and we’ll explain exactly what your job needs.
Not on the agreed scope. We inspect the deck during tear-off and show you any hidden damage with photos before doing anything. Only then do we discuss a change order, and only if you approve it. Upfront pricing, no surprises is how we operate.
Usually yes. A metal roof is a re-roofing job covering the same footprint, so plumbing and structural framing stay put unless you’re adding dormers or changing rooflines. If you’re pairing the roof with a room addition, that’s a different scope, and it’s where our Roofing in Kendall West page explains the broader picture.
You get the manufacturer’s finish and material warranty on the panels plus our 730-Day Done Right Promise on the workmanship. If something isn’t right, we make it right. Call (844) 761-9356 to review the warranty terms on the specific panel system you’re considering.
Get a Free Metal Roofing Estimate in Kendall West
We’ll walk your roof, measure it, check the deck and flashing conditions, and hand you a line-item written estimate covering panels, underlayment, trim, labor, and permit. No pressure, no vague lump sums. Estimates are free, and our technicians have up to 12 years of experience installing metal systems in South Florida conditions. Call (844) 761-9356 to schedule yours.
Written by the team at Groundwork Construction Co. of The Hammocks.