Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Windows & Doors: The The Hammocks Owner’s Guide
We install Mighty Buildings-compatible windows and doors for homeowners in The Hammocks, with window replacement typically running $4,500 – $15,000 and impact window installation $8,000 – $25,000 depending on count, size and glass package. Here’s the short answer on timing: door and window swaps are planned work, not emergency work, so we schedule them on a set date rather than promising same-day dispatch. Most standard single-unit swaps are completed in a single visit once the correct part is on site.
Owners in The Hammocks usually find a problem the hard way. It starts with a door that won’t latch clean, or a window sash that drags against the frame around July. Then the condensation shows up on the inside of the glass even on low-humidity mornings. By the time you’re wiping down the sill twice a week, the weatherstripping has already given up and the seal is gone. Mighty Buildings is a prefab and panelized construction system, which means the openings are sized and framed to a specific spec. Off-the-shelf replacement units from a big-box store won’t drop into those openings without modification, and that’s the part most owners don’t learn until the wrong unit is already on the truck.
One note up front: Groundwork Construction Co. of The Hammocks is an independent service provider. We’re not affiliated with Mighty Buildings, and we don’t claim to be. We source and install compatible windows and doors for Mighty Buildings homes, and we tell you plainly when a part has to come through the manufacturer versus when a quality equivalent works.
Key Takeaways
- Mighty Buildings openings are panel-spec, not standard rough openings. Measure before you order anything.
- Window replacement in The Hammocks runs $4,500 – $15,000; impact glass runs $8,000 – $25,000.
- South Florida humidity and salt air wear seals and weatherstripping faster than the national average.
- Hardware and weatherstripping are repairable. Failed insulated glass units and rotted frames are not.
- Every install is backed by our 730-Day Done Right Promise and priced upfront with no surprises.
Which Mighty Buildings Models This Applies To
Mighty Buildings built its reputation on panelized and 3D-printed wall systems, and the window and door openings in those homes follow the panel drawings, not a generic stud-framed opening. Depending on when your unit was produced and which model line it falls under, the rough opening dimensions, sill height and header detail can vary by a couple of inches from a conventional Florida home of the same square footage. That’s not a defect. It’s just a spec you have to respect.
Here’s how to identify what you actually need before you buy anything:
- Find the opening schedule. Mighty Buildings homes typically ship with a drawing set or panel schedule that lists each window and door by tag number, with dimensions and glass spec. It’s often in the closing packet or a document tube the owner kept. That sheet is the single most useful thing you can hand a contractor.
- Measure the visible opening, not the frame. Pull a tape across the width and height of the actual opening in the wall, inside face to inside face. Write it down to the eighth of an inch. Do this for every opening you want replaced, because they rarely match each other.
- Check the glass label. Most impact-rated units carry an etching in one corner of the glass with the manufacturer, the product code and the Florida product approval number. Photograph it. That label tells us exactly what rating the unit meets so the replacement matches.
- Note the frame material. Aluminum, vinyl and fiberglass all behave differently in South Florida heat, and the replacement needs to match the expansion characteristics of the original or you’ll get binding sashes within a season.
On the OEM-versus-aftermarket question: for Mighty Buildings specifically, we recommend matching the original spec wherever possible, because the panel system was engineered around those dimensions and ratings. When an exact OEM unit isn’t available or the lead time is too long, a quality aftermarket equivalent from a manufacturer like Andersen or Pella can work, but only if the dimensions and Florida product approval line up. We don’t guess at that. We verify it before anything gets ordered.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Windows & Doors Is Failing
Windows and doors in The Hammocks take a beating that most of the country doesn’t see. Between the humidity, the afternoon thunderstorms from June through September and the salt air that blows in off the coast, seals and weatherstripping age faster here than the national averages suggest. Here’s what failure actually looks like:
- Condensation between the panes. That foggy look inside the glass means the insulated glass unit’s seal has failed and moisture has entered the cavity. Once that happens the unit can’t be dried out or resealed in place. The glass has to be replaced.
- A door that won’t latch or drags on the threshold. Usually the hinge screws have pulled loose from the jamb, or the door slab has swelled from moisture absorption. On a panelized home, the fix depends on whether the jamb itself has moved or just the hardware.
- Daylight visible around a closed door or window. You shouldn’t see light through the perimeter when it’s shut. If you do, the weatherstripping is compressed or missing, and that gap is where your AC bill is leaking out and the rain is coming in.
- Water staining on the interior sill or drywall below the opening. This is the one that worries us most. Staining means water is getting past the perimeter seal or the flashing detail, and in a panel system that moisture can travel behind the finish before you notice it.
- Sticking sashes or a door that only closes when you lift it. In South Florida this is often a sign the frame has shifted or the rollers and tracks have worn. It can also mean the opening itself has moved, which is a structural conversation, not a hardware one.
If you’re seeing two or more of these, don’t wait for the next storm to confirm it. Call us and we’ll come look.
Replacement Cost & What’s Included
Here’s what window and door work runs for The Hammocks homeowners, installed:
| Scope | Installed Price Range |
|---|---|
| Window replacement (standard) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
What drives the range: the number of openings, the size of each unit, the glass package (standard insulated versus impact-rated), the frame material, and whether the opening needs modification to accept the new unit. A single door swap sits at the low end. A whole-home impact package with eight openings and custom sizing sits at the high end.
Our pricing is upfront, and the number you see is the number you pay. We put the parts and the labor on the same written line-item quote so you can see exactly what you’re paying for, and there are no change orders that show up after the fact. The install itself is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s a written guarantee, not a handshake.
One thing worth knowing before you budget: replacement windows and doors for a Mighty Buildings home sometimes require a custom-sized unit, and custom sizing carries a longer lead time and a higher part cost than a stock replacement. We’ll tell you which category your openings fall into during the estimate, so the quote reflects reality rather than a best-case guess.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can absolutely handle yourself. Putting a fresh bead of caulk around an exterior frame, tightening a set of loose hinge screws, or swapping a worn door sweep or weatherstripping strip are all reasonable weekend tasks, and we’d rather you do them than pay us for it. Checking your own measurements before you order? Good idea. Photographing the glass label? Do it.
Where DIY goes wrong on this particular part is in the removal and reset. A window or door unit in a panelized Mighty Buildings wall is heavier than it looks, it’s usually sealed and flashed into the panel in a way you can’t see from the inside, and pulling it without understanding the flashing detail is how you end up with water intrusion behind the wall that doesn’t show up until the next wet season. That’s not a scare tactic. We’ve fixed that exact mistake. On a second-floor opening, lifting a full glass unit into place also involves genuine fall and injury risk that’s not worth taking on a ladder. Professional installation isn’t just about the part fitting; it’s about the seal around it holding for the next 20 years.
If you’re unsure which side of that line your job falls on, call (844) 761-9356. We’ll tell you straight.
FAQs
A well-installed window or door unit should give you 15 to 25 years, but in The Hammocks the seal and weatherstripping are the first things to go, often within 8 to 12 years because of humidity and salt air. The glass and frame itself usually outlive the seal and hardware around it. If you’re past the decade mark and seeing condensation or drafts, it’s worth an inspection. Call (844) 761-9356 to schedule a free estimate.
Sometimes, yes. Hardware, weatherstripping, sweeps, rollers and hinge adjustments are all repairable, and we’ll tell you honestly when that’s the right call. A failed insulated glass unit, a rotted or cracked frame, or a door slab that’s warped from moisture usually can’t be repaired economically, and replacement is the better move. The honest answer depends on what’s actually failed, which is why we look before we quote. Estimates are free.
A single standard unit is typically completed in one visit, usually a few hours. A whole-home package with multiple openings takes longer and we’ll give you a realistic schedule in the written quote before you commit. We don’t give you a number on the phone and change it later. Call (844) 761-9356 and we’ll walk through the scope with you.
We start with your opening schedule, the measurements and the glass label, then match the replacement to the original spec, working with manufacturers like Andersen and Pella when an equivalent is the right answer. We don’t carry a parts inventory on a truck, so the part is ordered to your openings rather than pulled off a shelf. That’s how we avoid the wrong-size unit showing up on install day. If you’ve worked with brands like KraftMaid, Cambria or Silestone on other parts of your home, we handle that same brand partner approach here. Call (844) 761-9356 to start with a free estimate.
Ready to price your Mighty Buildings window or door work?
Call Groundwork Construction Co. of The Hammocks at (844) 761-9356 for a free project estimate and design consult, and we’ll come out, measure every opening properly, and hand you a written line-item quote with the parts and labor shown together. Calls are answered by a live person, 24/7, so you’re never stuck in a voicemail until Monday. Our technicians are background-checked and arrive in uniform, and our technicians have up to 12 years of experience on this exact type of work. We back every install with the 730-Day Done Right Promise, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000 to make a whole-home window package easier to say yes to. From foundation to finish line, we’re the contractor The Hammocks homeowners call when they want the job done right the first time.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.