Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Home Additions & ADU: The The Hammocks Owner’s Guide
If you own a Mighty Buildings home in The Hammocks and a panel, connector, or finish component on your addition or ADU has failed, we install compatible replacements, and the project lead range for a full home addition here is $45,000 – $130,000, with ADU construction at $90,000 – $220,000. Expect a live person on the phone when you call, not a scheduling queue. Groundwork Construction Co. of The Hammocks is an independent provider and is not affiliated with Mighty Buildings.
Owners usually find out the same way. A hairline crack runs along a seam inside the addition. A door in the ADU stops squaring up. Water stains the wall by an exterior panel joint after a summer storm. The structure didn’t announce the problem. South Florida’s heat and humidity did, over a long, quiet stretch of months. We see this often in The Hammocks, where homes sit close to the coast and the rainy season is unforgiving on exterior joints.
Which Mighty Buildings Models This Applies To
Mighty Buildings built its reputation on factory-made, prefab units with panelized walls and printed or composite exterior surfaces. Those builds aren’t all the same. Depending on the production run and series, panel dimensions, connector hardware, and the finish system can differ from one unit to the next. A wall panel spec that matched a neighbor’s build from one year may not match yours. That’s the compatibility gotcha most owners miss: the right replacement depends on the exact run, not the brand name alone.
The most reliable way to identify what you have is to photograph the panel’s edge profile and any stamp or label on the interior face, then measure the actual seam width and thickness. Don’t trust a spec sheet you found online. Measure the wall in front of you. From there you have two options: a factory-matched component, or a quality aftermarket equivalent that meets the same performance spec.
For Mighty Buildings specifically, aftermarket is often the better call. A well-matched composite or fiber-cement repair system can outperform an exact OEM part that’s weeks out, without compromising the structure. On finishes and interiors, we pull from our portfolio of brand partners – KraftMaid, Cambria, and Silestone among them – when an addition needs cabinetry or surfaces replaced during the same job. You choose quality, not just whatever happens to be available. The homeowner should never be cornered by a single supply chain.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Home Additions & ADU Is Failing
- Hairline cracks along panel seams. These usually form because thermal movement has worked the joint loose. The cushioning layer between panels has compressed over time in The Hammocks heat, so the seam flexes instead of holding.
- Interior water staining or a musty smell after rain. The exterior skin or the flashing at a panel joint has opened. Once water finds that path, it tracks inside and the repair gets bigger the longer it waits.
- Sticking doors, jambs, or drawers in the addition. A swelling or shifting panel indicates moisture intrusion or a settling foundation at the addition footprint. In The Hammocks, that often reads as a joint problem, not a door problem.
- Bubbling, chalky, or peeling finish on the exterior face. The UV and rain cycle has broken down the protective coat. Left alone, the panel itself starts taking on moisture and the finish failure becomes structural.
- Connector or anchor hardware loosening. Movement at the panel-to-frame connection shows up as a wobble, a gap, or a visible shift around the anchor. This one is worth a close look before anything else.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For The Hammocks, the installed range for a home addition runs $45,000 – $130,000, and a detached ADU runs $90,000 – $220,000. A structural component swap within an existing addition or ADU typically lands at the lower end; a full addition or ADU build that includes panelized walls, finish, and interior work sits near the middle to top. ADU construction is the larger number because it involves permits, foundation, utilities, and full interior finishes.
What drives the difference between two quotes on the same property: panel count and dimensions, whether exterior finish or interior cabinetry is part of the scope, permit and inspection cost, and how much hidden damage the failing component caused before you called. We give you upfront pricing – the number you see is the number you pay, and the quote is written line by line. The wood and finish materials carry their own manufacturer warranties, and the installation is covered by our 730-Day Done Right Promise. If it isn’t done right, we make it right.
Your budget can go further too. We offer 0% financing for 18 months and $1,000 off projects over $10,000.
DIY or Call Us?
Some things are fine to check yourself. You can photograph seams, document measurements, and watch for staining and cracking month to month. You can note where a door sticks and when it started.
Structural panel replacement is not a safe DIY job. When a panel is part of a load-bearing or exterior envelope system, getting it wrong opens the wall to water, weakens the frame, and voids any warranty on the work. A failed exterior joint, a loosening connector, or an interior panel that’s swelling with moisture is where we step in. We’re background-checked, wear uniforms, and you’ll talk to a real person who can tell you the next step over the phone, any hour of the day.
If your Mighty Buildings addition or ADU in The Hammocks is showing any of the symptoms above, call us and we’ll look at it. The estimate and design consult are free.
FAQs
Exterior joints typically show their first real wear within 10 to 15 years in this climate, while interior finish components last longer. South Florida’s heat and rain cycle means seams and finish coats age faster than they do inland. Add the salt in the air near The Hammocks and the pace picks up. Call (844) 761-9356 for a free inspection – estimates are free.
Often yes. A closed seam, a re-flashed exterior joint, or a renewed finish coat can restore a panel that’s still structurally sound. Repair stops being an option once the panel has swollen, delaminated, or the hardware has shifted. We tell you which one you’re looking at before we quote the work.
A single component replacement usually finishes in one day, and a multi-panel repair runs one to three days depending on how much is involved. A full addition or ADU build is a matter of weeks, not days. Call (844) 761-9356 to schedule your free estimate and get an exact timeline.
We measure the existing part, match it against the panel profile and the label on your unit, then choose between a factory-matched component and a quality equivalent that meets the same spec. We don’t guess, and we don’t have a pile of parts in a warehouse waiting for you – every part is matched to your actual build. Call (844) 761-9356 with your photos and measurements to get started.
Groundwork Construction Co. of The Hammocks keeps the whole project under one roof – from foundation to finish line, for the addition above and the finishes inside it. If your Mighty Buildings addition or ADU needs attention in The Hammocks, or if you’re weighing a new build near The Hammocks and want a straight quote, call (844) 761-9356 to schedule your free estimate. Live person, 24/7. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.