Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Windows & Doors: The The Hammocks Owner’s Guide
We install and service Dvele-compatible windows and doors for homeowners in The Hammocks, and most full window replacement projects run $4,500 – $15,000 installed, with impact-rated units climbing to $8,000 – $25,000. If you have a single failed Dvele component (a sash, a threshold, a hardware set, a failed IGU), replacement parts and labor are priced per unit rather than per house, and we quote it in writing before anything is ordered. Owners in The Hammocks usually find us after a hurricane-season symptom: a door that no longer latches square, condensation fogging between panes, or a window that lets water past the sill during a summer downpour. Groundwork Construction Co. of The Hammocks is an independent service provider and is not affiliated with Dvele.
Which Dvele Models This Applies To
Dvele builds panelized and modular homes, which means the windows and doors on your house were specified at the factory, not picked off a rack at a local supplier. That single fact drives everything about parts. The model and unit schedule live on a data plate and on the fenestration labels, and those labels are the fastest way to identify what you actually have. Don’t guess from a photo.
For The Hammocks owners, the practical order of operations looks like this:
- Find the unit label. It’s usually on the frame head or the jamb, and it carries the series, size, and glass package. Peel back paint and trim gently; the label is often hidden under the interior casing.
- Measure the rough opening, not the sash. A quarter-inch error here is the difference between a part that seats and one that leaks.
- Match the glass package. South Florida spec matters. A Dvele home built to Miami-Dade or Broward wind-borne debris requirements will have impact-rated glazing and specific anchoring. Substituting a non-rated unit is not a code problem you want to inherit.
The OEM-versus-aftermarket call: for hardware, weatherstripping, and screens, quality aftermarket equivalents are fine and often better. For glazing and any impact-rated assembly, stay with a rated equivalent matched to the opening’s design pressure. We’ll tell you which side of that line your part falls on when we quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Windows & Doors Is Failing
The Hammocks sits in a climate that punishes fenestration: high humidity year-round, salt air moving in off the coast, and a rainy season that hammers the exterior envelope from June through November. Failure here rarely looks dramatic at first. It looks like a small annoyance you keep meaning to deal with.
- Fogging or haze between the panes. That’s a failed seal in the insulated glass unit. Once the desiccant is saturated, the unit won’t clear, and the insulating value is already gone.
- Water tracking past the sill after heavy rain. Usually a worn or compressed weatherstrip, a clogged weep channel, or a threshold that’s lost its seal. In The Hammocks, this typically shows up during the first strong summer storm and then worsens quietly.
- A door that drags, sticks, or won’t latch square. Often a shifted hinge, settled frame, or swollen slab from humidity. Left alone, the misalignment stresses the lock and the frame.
- Drafts or heat gain you can feel at the frame. Failed seals and worn gaskets let conditioned air escape. Your energy bill notices before you do.
- Condensation on the interior glass that won’t dry. A humidity and seal problem combined. Worth checking before it migrates into the wall assembly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For The Hammocks, window replacement installed runs $4,500 – $15,000 for a typical project, and impact window installation runs $8,000 – $25,000 depending on unit count and ratings. A single failed unit or hardware set falls well below those ranges; we price it as a discrete repair. What moves the number: unit count, impact rating, glass package, frame material, and whether the rough opening needs adjustment.
Our pricing is upfront and line-itemed. You see the part cost and the labor separately, and the number you see is the number you pay. All work carries the 730-Day Done Right Promise: if it’s not done right, we make it right. Call (844) 761-9356 for a free estimate, and we’ll confirm the exact part before anything is ordered.
DIY or Call Us?
Some of this you can safely handle yourself. Check and clear weep channels. Wipe and inspect weatherstrip. Tighten visible hardware. Note where water is actually entering. Those checks are free and they’ll tell you a lot about what’s failing.
Where DIY goes wrong: resealing a threshold or replacing a hinge on an impact-rated door without matching the original hardware and anchoring. Improper resealing can compromise the water-resistance of the assembly, and in The Hammocks that failure tends to show up months later inside the wall rather than at the door. A door that’s not latching square is also a security issue, not just an inconvenience. Call (844) 761-9356 and we’ll tell you honestly whether it’s a five-minute fix or a part replacement.
FAQs
Expect 15 – 25 years for quality frames and hardware, with the insulated glass unit often being the first component to fail, sometimes in 10 – 15 years under South Florida humidity and heat cycling. Hardware and weatherstripping wear faster and are the usual first replacement. Call (844) 761-9356 for an assessment of your specific units.
Often yes. A failed IGU can be reglazed, and worn hardware or weatherstrip can be swapped without touching the frame. Full replacement becomes the answer when the frame itself is damaged or the opening is out of square. Call (844) 761-9356 and we’ll tell you which path is honest for your unit.
A single-unit hardware or weatherstrip swap is typically completed in one visit. A reglaze or full unit replacement takes longer once the part is on site and is scheduled around your availability. We give you a realistic timeline in writing with the quote, not a guess on the phone.
We identify the unit from its label and measurements, then source the rated equivalent matched to your opening’s spec. We don’t claim to stock parts or carry them on a truck; we confirm the exact part against your unit before ordering so you’re not paying for a guess. Call (844) 761-9356 for a free estimate.
We also service KraftMaid, Cambria, and Silestone installations across The Hammocks.
Call Groundwork Construction Co. of The Hammocks at (844) 761-9356 for a free estimate. A live person answers around the clock, our technicians are background-checked and arrive in uniform, and every job is backed by the 730-Day Done Right Promise. If you’d like to talk financing, we offer 0% for 18 months and $1,000 off projects over $10,000. From foundation to finish line, we handle the whole scope so you’re not coordinating five different trades in The Hammocks.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.