Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Bathroom Remodeling: The The Hammocks Owner’s Guide
Dvele bathroom remodeling work in The Hammocks typically runs $9,000 – $28,000 installed, and the scope matters more than the label. We’re an independent service provider, not affiliated with Dvele, and we get called in when a Dvele bathroom component – a vanity cabinet, a shower surround panel, a fixture assembly, a tub-to-shower conversion – has failed, gone out of production, or was ordered to the wrong spec. Most owners discover the problem the same way: water pooling where the shower pan meets the tile, a vanity drawer front that won’t align anymore, or a caulk line that keeps reopening no matter how many times it’s redone. That’s usually a substrate or fit problem, not a maintenance problem. Licensed and insured, upfront pricing, and the 730-Day Done Right Promise on every job.
Which Dvele Models This Applies To
Dvele builds to a modern system-and-panel spec, which means bathroom components are matched to the home’s specific wall assembly and rough-in dimensions rather than a universal cabinet box. The practical gotcha most The Hammocks owners hit: a vanity that measures 60 inches on the outside can have an interior cabinet depth that won’t accept a standard 21-inch aftermarket replacement, and Dvele’s own panel-cut dimensions vary by series and by production run. Before we quote anything, we take three measurements – finished wall-to-wall, rough plumbing centerline, and the drain offset from the back wall – because guessing on any one of those is how a remodel turns into a return.
How to identify what you have: check the label inside the vanity cabinet door or on the inside face of the shower panel for the model and series code, photograph the rough-in, and note whether the existing surround is a one-piece panel or a three-piece kit. On the OEM-versus-aftermarket decision, we’re straight with you: Dvele-specific panels protect the original look and fit, while a quality aftermarket equivalent from a name-brand manufacturer often costs less and holds up better in Florida humidity. We quote both when both are viable, with the differences written out. We also work with KraftMaid, Cambria, and Silestone when a full bathroom remodel makes more sense than a part swap.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Bathroom Remodeling Is Failing
- Soft or discolored spots at the shower pan edge. Water is getting past the pan-to-wall joint and soaking the substrate. Caulking over it hides the symptom for a few months and lets the rot spread.
- Vanity doors and drawers that won’t stay aligned. Cabinet boxes in South Florida bathrooms swell and warp when the interior humidity climbs. Realignment fixes it once or twice; after that the box itself has moved.
- Cracking or lifting tile around the drain. Usually deflection under the pan or a failed mortar bed, not bad grout. Any redone grout line that reopens within a year points to movement below.
- Persistent musty smell with no visible leak. Trapped moisture behind a panel or under a floor. In The Hammocks we see this most in bathrooms with no exhaust fan or a fan vented into the attic instead of outdoors.
- Fixtures that drip at the trim plate or wobble at the wall. A failing valve body or a loosened mounting bracket. Left alone, a valve body leak runs inside the wall where you can’t see it until the drywall stains.
Replacement Cost & What’s Included
Bathroom remodeling in The Hammocks with new components and finish runs $9,000 – $28,000. Tighter scopes land lower: a small bathroom remodel is $5,000 – $12,000, a walk-in shower installation $4,500 – $12,000, a tub-to-shower conversion $3,500 – $10,000, a shower replacement alone $3,000 – $8,500, and a vanity installation by itself $800 – $3,000.
What drives the spread is what’s behind the wall, not the fixture you can see – whether the pan has to come out, whether the substrate is sound, whether the rough-in matches modern dimensions. Every quote we give is line-itemed and upfront: demo, materials, rough-in corrections, tile or panel, and finish. The number you see is the number you pay, and the work carries the 730-Day Done Right Promise. Financing at 0% for 18 months is available, plus $1,000 off projects over $10,000 and a free estimate and design consult.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: the label inside the vanity or on the panel for model numbers, whether the exhaust fan actually pulls air (hold a tissue to the grille), and whether a slow drain is a clog or a flat spot in the trap. What goes wrong is everything past that. Bathroom work sits on top of the waterproofing layer, and a pan or shower surround installed without a correctly sloped, continuous membrane leaks into the floor assembly – quietly, for years. Pulling a tub or opening a wall also exposes supply lines and drain connections that need to be capped and re-soldered or re-pressed correctly, and a bad joint there is a flood, not a call-back. If the problem is at the waterproofing or plumbing level, stop and call us at (844) 761-9356. Estimates are free.
FAQs
A properly installed bathroom assembly in South Florida should give you 15 to 25 years before a full replacement, but the waterproofing layer and the ventilation are what decide that, not the fixture brand. Bathrooms with a working exhaust fan vented outdoors and a maintained seal at the pan edge routinely outlast ones without. If yours is past 12 years and showing more than one symptom above, call (844) 761-9356 for a free assessment.
Sometimes, yes – a re-caulk and re-grout at the pan edge is a real fix if the substrate is dry, and a vanity can often be re-anchored rather than replaced. But repairs only hold when the underlying cause is addressed. If moisture has reached the substrate, the repair is temporary and usually more expensive than the replacement. Call (844) 761-9356 and we’ll tell you honestly which side you’re on – estimates are free.
A vanity swap is typically a single-day job; a shower replacement or tub-to-shower conversion runs 3 to 7 working days depending on what’s behind the wall and whether the rough-in has to move. We give you the schedule in writing before we start and stick to it. Most jobs are completed in a single visit once materials are in hand. Call (844) 761-9356 to schedule your free estimate.
We source through manufacturer and supplier channels using the model and series code from your cabinet or panel label, not by matching a photo. When an OEM component is discontinued, we quote a verified quality equivalent from a named brand with the spec differences written into the line item, so you can compare before you commit. Call (844) 761-9356 for an exact quote – estimates are free.
Get a Straight Answer on Your Dvele Bathroom
If you’re in The Hammocks and something in your Dvele bathroom has failed, we’ll measure it, tell you what’s actually wrong, and quote it in writing with no change orders. Calls are answered by a live person 24/7, our technicians are background-checked and arrive in uniform, and every project is covered by our 730-Day Done Right Promise. A live person can be reached right now at (844) 761-9356 – call to schedule your free estimate.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.