Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Windows & Doors: The The Hammocks Owner’s Guide
We install Techo-Bloc-compatible windows & doors for The Hammocks homeowners, with window replacement typically running $4,500 – $15,000 and impact-rated installation at $8,000 – $25,000 depending on opening count, glazing and frame spec. Most owners don’t go looking for this part until something quits on them: a sash that won’t seat against the jamb, a door slab that drags after a wet season, or a hinge-side gap that lets in the afternoon storms. In The Hammocks, that first sign usually shows up on the west or south elevation, where summer sun and driving rain do their worst. Our windows and doors work is covered by the 730-Day Done Right Promise, and every quote is itemized upfront so you know what you’re paying for before anyone touches a frame.
Which Techo-Bloc Models This Applies To
Techo-Bloc is best known for hardscape and wall systems, so when an owner asks us to match a window or door to “the Techo-Bloc model,” the answer starts with the actual opening spec, not a brand label. Techo-Bloc’s product lines are keyed by series and profile, and the hardware and frame components we source are matched to the rough opening dimensions, sill height and wall assembly that surround the unit, not to a single manufacturer name. Here’s the rule we use on The Hammocks jobs: measure the rough opening in three places (top, middle, bottom) and the jamb depth, then check the data plate on the frame for the series and profile code. That plate is the only reliable identifier. Handwritten notes and contractor quotes from years ago rarely hold up.
On the OEM-versus-aftermarket question, Techo-Bloc-specific frame and hardware components tend to be built to a tighter spec than generic equivalents, and in a coastal South Florida climate the aftermarket shortcut usually shows its limits within two summers. We’re an independent service provider, not affiliated with Techo-Bloc, so we source the right match for your opening without pretending to be the manufacturer’s own service arm. If your unit carries a Techo-Bloc frame profile, the fit and finish of an equivalent part matters more than the price difference.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Windows & Doors Is Failing
These are the symptoms that actually bring The Hammocks homeowners to the phone. Watch for any one of them and the part is likely worth a look:
- Daylight visible around the sash or door edge. Weatherstripping or gasket compression has given out, which is the most common failure in our heat and humidity and lets water track in behind the frame.
- Condensation between the glass panes. The sealed unit’s desiccant has been exhausted and the seal has failed; the glass isn’t repairable at that point, only the unit.
- A door that drags or won’t latch cleanly. Either the hinge hardware has worn or the slab has swollen with moisture. In The Hammocks, we regularly see this on doors facing west where afternoon sun expands the frame faster than the slab.
- Operating hardware that feels loose or gritty. The lock, handle or operator mechanism has lost lubrication or the internal spring tension has relaxed, which is a worn-out-part problem, not a cleaning problem.
- Water staining or soft wood at the sill. The sill or threshold has taken on water behind the flashing. Left alone, this is the failure that turns a part swap into a frame repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing in The Hammocks tracks the opening type and glazing spec more than any other factor. Here’s what we quote:
| Work | Typical Installed Range |
|---|---|
| Window replacement | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
The range moves on three things: the number of openings, whether the glass is impact-rated to South Florida’s wind-borne debris requirements, and whether the existing frame and flashing can be reused or have to be rebuilt. A single sash swap is at the low end; a full elevation of impact units with new flashing sits at the top. Upfront pricing means the number you see is the number you pay, and we itemize parts and labor so you can see exactly where the money goes. Every installation carries the 730-Day Done Right Promise in writing.
DIY or Call Us?
Some diagnostics are safe and worth doing yourself. Check the data plate, feel for drafts around the sash, look for condensation between the panes, and note which side of the house the problem is on. What we don’t recommend is pulling a frame or re-hanging a door slab on a wall opening that may have water behind it. A mis-seated unit in The Hammocks lets in storm-driven rain that rots the wall assembly long before you see a stain inside, and a door that’s out of square binds again within a season. That’s the point where the part swap becomes a repair you can’t undo. The 0% financing for 18 months and the $1,000 off projects over $10,000 make the job easier to budget for. Call (844) 761-9356 and a live person picks up, any hour, every day.
FAQs
Expect the sealed glass unit and weatherstripping to be the first wear items, typically showing failure within 10 to 15 years in South Florida’s heat, UV load and salt air, while frames and structural hardware usually outlast them. Calls are answered by a live person 24/7 if you want a straight read on your own unit. Call (844) 761-9356 for a free estimate.
Often yes on hardware, weatherstripping and gaskets, but rarely on a failed sealed glass unit, where the gas and desiccant are gone and no repair restores them. Our technicians have up to 12 years of experience diagnosing that split. Call (844) 761-9356 for a free estimate and we’ll tell you which side of the line your part is on.
Most single-unit replacements are completed in a single visit, and a full elevation of impact windows typically takes one to two days depending on opening count and whether flashing has to be rebuilt. We schedule around your week. Call (844) 761-9356 to book your free estimate.
We match the component to the data plate on your frame and the measured rough opening, then source from the brand-matched supply chain rather than substituting a generic equivalent that fails early in coastal humidity. Background-checked, uniformed technicians handle every install. Call (844) 761-9356 for a free estimate, and we’ll also service KraftMaid, Cambria and Silestone products on the same schedule.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.