Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The The Hammocks Owner’s Guide
We install Unilock-compatible windows and doors for homeowners across The Hammocks, with most full window replacement projects landing between $4,500 and $15,000 and impact-rated units running $8,000 to $25,000 installed. A single failed sash, hinge, or seal repair is usually a much smaller job. When we source a Unilock-matched component, the work typically gets scheduled within a few business days, not weeks. To schedule an assessment, call (844) 761-9356.
Most owners in The Hammocks discover a problem the same way: a window that sticks when they try to open it, condensation trapped between panes, or a door that no longer latches cleanly after a rainy stretch. That last one shows up a lot here. The Hammocks sits close enough to the Everglades that humidity and afternoon storm pressure cycles work on door frames and window gaskets year after year. It’s rarely a dramatic failure. It’s a slow slide from “a little stiff” to “we can’t close this anymore.”
Which Unilock Models This Applies To
Unilock windows and doors show up across a range of series and model lines, and the part you need depends entirely on which series you have. The fastest way to identify yours is to find the manufacturer label etched on the glass corner or printed on the frame jamb. That label carries the model number, series designation, and often the date code. Write it down before you call anyone. A photo of the label works too.
Once you have that number, you can decide between OEM and aftermarket. OEM means the exact part Unilock specifies for your model: perfect fit, higher cost, longer lead time. A quality aftermarket equivalent can work well for certain components like weatherstripping, glazing gaskets, and some hinge hardware, and it usually costs less. For structural or impact-rated components in The Hammocks, we lean OEM or a certified equivalent to keep your rating intact. If you’re unsure which category your part falls into, a brief call to (844) 761-9356 sorts it out. We’re an independent service provider and not affiliated with Unilock, but we know these products well enough to tell you what matters.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
- The window is hard to open or won’t stay open. A worn balance mechanism or a warped sash is usually the cause. In The Hammocks, heat cycling over several summers can warp frames that were fine at installation.
- Condensation or fog between the glass panes. That’s a broken seal in a double-pane unit. The glass needs replacement, not a cleaning; the moisture is trapped inside the sealed assembly.
- The door drags on the threshold or won’t latch. The hinge screws have likely backed out of the frame or the door has shifted. Humidity-driven wood movement in The Hammocks makes this one of the most common calls we get.
- Water comes in during a hard rain. Worn weatherstripping, a failed sweep, or degraded caulk at the frame is usually behind it. Left alone, water gets into the wall cavity.
- Visible rust or pitting on operating hardware. Coastal humidity and salt air eat through low-grade finishes faster than most homeowners expect. Once hardware starts pitting, replacement is more reliable than refinishing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full window replacement in The Hammocks runs $4,500 to $15,000, and impact window installation runs $8,000 to $25,000. Those ranges cover removal of the old unit, new materials, sealing, and cleanup. Smaller single-component replacements cost less than a full unit swap.
What drives the range: the number of openings, the series of Unilock product, glass rating, and whether we’re matching an existing color or trim profile. A one-window job sits near the bottom. A whole-house package with impact glazing and matching doors pushes toward the top. We price parts and labor as separate line items so you can see exactly what the component costs versus the installation. The work is covered by our 730-Day Done Right Promise, and pricing is upfront with no surprises. If you want a number for your specific job, call (844) 761-9356. Estimates are free.
DIY or Call Us?
You can safely check a few things yourself. Snap a photo of the label on the glass corner or frame jamb, measure the opening width and height, and check that the hinges and latch are tight. Run a hand around the frame on a dry day to feel for air leaks. Those steps give us what we need to quote accurately.
Where DIY goes wrong is on the glass and frame work. Replacing a sealed glass unit, resetting a door that has shifted, or swapping an impact-rated window component that carries a safety rating is not a weekend job. Get it wrong and you’re dealing with water intrusion or a unit that no longer meets that rating. We handle the sourcing, the fit, and the seal. Call (844) 761-9356 and we’ll walk you through your options.
We also service KraftMaid, Cambria, and Silestone for homeowners planning other parts of their home improvement projects across The Hammocks.
FAQs
Unilock windows and doors can last 15 to 25 years with proper care, though The Hammocks humidity and storm cycles tend to shorten that on lower-end models. The glazing seal is usually the first thing to go, followed by hardware and weatherstripping. Call (844) 761-9356 for an assessment.
Sometimes yes. A door that drags may just need adjustment, and weatherstripping or sweeps are straightforward replacements. A broken glass seal, however, can’t be repaired; the unit has to be replaced. Call (844) 761-9356 and we’ll tell you honestly which category you’re in.
A single window or door component usually goes in within a few hours, and a whole-house replacement takes several days depending on how many openings and what’s involved. Call (844) 761-9356 to schedule your free estimate and get a realistic timeline.
We start with the label on your glass or frame, then match it to the series and model to confirm the exact component. We work with supplier channels to get OEM parts or a certified equivalent where it fits your rating. Call (844) 761-9356 to start the match.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.