Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Roofing: The The Hammocks Owner’s Guide
Unilock-compatible roof repair and part replacement in The Hammocks typically runs $400 – $1,800 for a repair, and full roof replacement ranges from $8,000 – $20,000. We install Unilock-compatible roofing components and source the right matching parts for your system, with most repairs completed in a single visit. Groundwork Construction Co. of The Hammocks is an independent service provider, not affiliated with Unilock.
Most owners don’t go looking for a failed part. They find it after a storm. A ceiling stain shows up in a bedroom off SW 147th Avenue, or a piece of ridge cap lands in the pool cage after a summer squall. Then the questions start: which part, which size, which version of the system. This page answers those.
Which Unilock Models This Applies To
Unilock roof components show up on a range of tile and panel systems, and the part that fits one series won’t fit another. Before we quote anything, we identify what’s actually on your roof. That means checking the original installation paperwork if you have it, measuring the profile of the component, and looking for casting or stamped marks on the tile or panel underside. The Hammocks has a lot of homes built in the 1980s through the 2000s, and the profile that went on a 1990s build is often not the one stocked for a 2005 build.
The compatibility gotcha we run into most: two Unilock components can look identical from the ground but differ by a quarter inch in the interlock channel. A part that seems right will seat loosely, and loose seating means wind lift during the first named storm. That’s why we measure rather than eyeball.
On OEM versus aftermarket, here’s the honest split. OEM gets you an exact match with the original profile, which matters on visible field components where a mismatch shows. Quality aftermarket equivalents are fine for hidden flashing and fastener parts, and they can cut cost on a repair. We’ll tell you which is which for your specific roof, and we won’t upsell OEM where it buys nothing. We don’t claim to stock parts or carry them on a truck. What we do is source the correct part for your system and install it properly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Roofing Is Failing
- Lifted or shifted components after a storm. Wind gets under an edge that was already loose and lifts it. In The Hammocks, the afternoon thunderstorm pattern means this shows up repeatedly from June through October, and a single lifted piece usually means the fasteners or interlock around it are compromised too.
- Water staining on ceilings or in the attic. That’s the flashing or underlayment beneath the Unilock components failing, not the visible tile. South Florida’s UV load breaks down underlayment faster than the tile above it, which is why a roof can look fine from the street and leak anyway.
- Cracked or chipped tile at the valleys and ridges. Foot traffic during earlier repairs is the usual cause, and cracks at the stress points let water straight through. A hairline crack spreads fast once water gets in and the sun heats it daily.
- Granule or surface loss on panel-style components. Sun exposure across The Hammocks rooflines does this over time, and the loss exposes the substrate underneath. Panels past this point seal poorly no matter how well they’re re-fastened.
- Loose ridge caps and visible fastener heads. Backed-out fasteners are the earliest warning sign, and they’re usually the cheapest thing to catch before a small issue becomes a leak. If you can see nail heads from the ground, that’s worth a look.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Roof repair in The Hammocks runs $400 – $1,800. Tile roof repair specifically falls in the $600 – $2,500 range when the work involves tile system components. Full roof replacement runs $8,000 – $20,000. Those ranges hold whether you have Unilock components or not, and they include removal of the failed part, sourcing the correct replacement, and installation.
What drives the number: how many components are affected, whether the failure is a single part or a whole run, and whether underlayment or flashing needs work underneath. A single lifted component is at the low end. A section that’s been leaking into the deck is at the high end.
We price upfront and in writing: the number you see is the number you pay, with no change orders once work starts. Every repair is covered by our 730-Day Done Right Promise, and if it’s not done right, we make it right. Most repairs are completed in a single visit. Call (844) 761-9356 for your free estimate.
DIY or Call Us?
Some of this is safe to check yourself. From the ground with binoculars, you can look for lifted components, visible fastener heads, cracked tiles, and staining on the ceilings inside. You can photograph what you see and pull your original installation paperwork. That’s useful information and it helps us quote faster.
Roof work is height work, and in South Florida that’s a real hazard: hot surfaces, sudden storms, and a fall from roof height is a serious injury. Beyond the safety of getting up there, a mis-seated Unilock component or a poorly flashed repair doesn’t just fail quietly. It can let water into the deck and rot framing before you notice a stain. That turns a $600 job into structural work.
Our technicians have up to 12 years of experience and are background-checked, arriving in uniform. Calls are answered by a live person 24/7 if you spot a problem after a storm. Call (844) 761-9356 to schedule your free estimate.
FAQs
How long does a Unilock roof component last? A properly installed component can last well past a decade, but the South Florida sun, heat, and summer storms shorten that considerably compared to cooler climates. The underlayment beneath it often fails first, well before the visible tile does. Call (844) 761-9356 for an exact quote on your roof, free of charge.
Can it be repaired instead of replaced? Often, yes. A single lifted or cracked component is usually a repair in the $600 – $2,500 range rather than a full replacement. We tell you plainly when a repair is enough and when it isn’t. Call (844) 761-9356 and we’ll give you a straight answer.
How long does the swap take? Most single-component replacements are completed in a single visit, typically a few hours. Larger sections that involve underlayment or flashing take longer. We confirm the schedule with your written estimate. Call (844) 761-9356 to schedule yours.
How do you source the right part? We identify your system by measuring the profile and checking for manufacturer marks, then source the matching component through our material suppliers. We bring the right part rather than guessing from the driveway. Call (844) 761-9356 for a free estimate.
If your Unilock roof has a failed or failing component, we’ll identify it, price it honestly, and install it right. Our brand partnerships across every trade (KraftMaid, Cambria, and Silestone included) mean we know where to source quality parts, and our 730-Day Done Right Promise means the work is backed in writing. Call (844) 761-9356 for your free estimate and design consult.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.