A Groundwork company - serving The Hammocks, FL

Belgard Home Additions & ADU in The Hammocks, FL

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Belgard Home Additions & ADU: The The Hammocks Owner’s Guide

We build Belgard-compatible home additions and ADUs for The Hammocks homeowners, and a full addition runs $45,000 – $130,000 depending on square footage, foundation type and finish level. The part that most often brings an owner to this page isn’t the pavers themselves – it’s the structural hardware where the addition meets the existing home: the ledger connections, column bases, sill plates and slab transitions. In The Hammocks, that connection point fails first because our wet season floods those joints, the water sits, and the anchor hardware starts to give. When you see a hairline that reopened after you patched it, or a base plate that’s started to shift against the pavement, you’re looking at the failure.

Call (844) 761-9356

Which Belgard Models This Applies To

Belgard’s structural line covers a few families, and the one you have changes which hardware matches. Their slab and paving systems – the Mirage and Dimensions families among them – are modular, so the same plate won’t fit every pier or column base. They also spec a range of wall-and-column kits – the Belair and Weston lines among them – all with their own footing and grout dimensions. Get the model name off the unit’s label or a stamped mark on the base, and measure the footing to the nearest quarter inch. That’s the number that decides compatibility.

The OEM-versus-aftermarket call is real for Belgard hardware. OEM base plates and anchors come pre-tested to the manufacturer’s load ratings – usually 1.5x to 2x the designed live load. A generic equivalent tested to the same load serves fine and often lands faster. A generic that only “looks the same” doesn’t. Belgard’s commercial-grade lines spec hardware at roughly 3,000-5,000 psi compressive strength, and a substitution that doesn’t match that spec will crack inside two years in The Hammocks’ humidity. We’re an independent installer of Belgard products and not affiliated with the manufacturer, so we source compatible hardware and install it to the finished dimension they specify.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Belgard Home Additions & ADU Is Failing

  • Reopening cracks at the connection joint. That seam between the addition and the original wall isn’t a cosmetic problem – repeated water intrusion in The Hammocks pushes movement into the anchor hardware and you’ll see it as a hairline that keeps coming back.
  • A base plate lifting or rocking. Walk on every column base and pavers near the addition, and look for any give or rocking that shouldn’t be there. That’s evidence the footing or grout has begun to settle around the anchor.
  • Efflorescence or white bloom on the base. Water is traveling through the concrete and pulling salts to the surface. It usually signals moisture getting past the joint at a seam that should be sealed.
  • Rust-tinted water on the base. That’s the color a fastener leaves when the protective coating has gone and the core is exposed to our salt air and rain cycles.
  • Bulging or separation along the wall attachment. Any gap wider than a credit card where the addition meets the wall is movement. Stop using the space and get it inspected before you let anyone walk it again.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In The Hammocks, a full addition build runs $45,000 – $130,000. Here’s what drives that range, so you can price it honestly before you call:

  • Foundation and footing work: $6,000 – $18,000
  • Frame, wall and roofing tie-in: $12,000 – $40,000
  • Exterior finish and pavers: $8,000 – $25,000
  • Interior finish, electrical and plumbing: $15,000 – $45,000

The number moves most with the size and how difficult the connection is to work around. Part-only pricing is not what you’re buying when you replace a connector or base plate – it’s parts plus qualified labor, and we quote both in the written line-item before we start. All work carries the 730-Day Done Right Promise: if it isn’t done right, we make it right. Upfront pricing, no surprises.

DIY or Call Us?

You can do the safe part yourself: read the model label, measure the footprint, photograph the plate and footing, and note where the water is pooling. What you shouldn’t do is unload or remove a footing plate or wall anchor on your own. A connection that’s been holding weight can release suddenly and it’s a hazard, and it’s also how a small repair turns into a structural problem. The piece that sheared isn’t the part to chase – the question is why it sheared. Call Groundwork Construction Co. of The Hammocks at (844) 761-9356 and we’ll tell you whether a part swap handles it or the footing needs work first. Estimates are free, calls are answered by a live person around the clock, and our technicians have up to 12 years of experience with Belgard systems.

FAQs

How long does Belgard addition hardware last in The Hammocks?

A correctly installed, sealed connector should hold 15 to 20 years in our climate. Florida’s rain and humidity are the enemy: unsealed hardware around an addition in The Hammocks often shows its first real problem inside five years. Call (844) 761-9356 for an inspection quote.

Can this be repaired instead of rebuilt?

Often yes. A single failed plate, a grout joint or one anchor bolt can be replaced without touching the whole addition, and that’s the cheaper path roughly half the time. What can’t be repaired is a footing that’s settled or an anchor pulled out of concrete.

How long does the swap take?

A parts-and-hardware replacement is typically a one to two day job on a straightforward addition. If the footing or the wall tie needs rebuilding, plan on a week or more, and we won’t quote the timeline until we’ve seen the connection.

How do you source the part?

We identify the exact Belgard model and hardware spec, then source either OEM or a tested equivalent that matches the load rating. We never carry parts on a truck and we don’t stock inventory, so we confirm availability in writing before the work is scheduled. Call (844) 761-9356 to start the free estimate.

Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 761-9356
Local Service Coverage

Request a Free Estimate in The Hammocks

Tell us what you need - Groundwork Construction Co. of The Hammocks responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch