A Groundwork company - serving The Hammocks, FL

Jerith Kitchen Remodeling in The Hammocks, FL

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Kitchen Remodeling: The The Hammocks Owner’s Guide

We install Jerith-compatible kitchen remodeling components in The Hammocks, and a full kitchen remodel here typically runs $14,000 – $45,000 installed. Smaller scopes like cabinet replacement or a countertop and backsplash package land well below that. Most Hammocks owners don’t discover a failing part until something gives: a cabinet door that won’t stay closed, a drawer that grinds, a hinge that’s torn loose from the frame, or a countertop seam that’s started to lift and darken along the edge. In our humidity, these problems tend to announce themselves in clusters rather than one at a time.

Call (844) 761-9356

Key Takeaways

  • Installed kitchen remodeling in The Hammocks: $14,000 – $45,000.
  • We’re an independent contractor, not affiliated with Jerith. We source compatible and quality-equivalent parts.
  • We don’t stock parts or carry them on a truck. Every component is ordered, matched, and verified before install day.
  • All work is covered by the 730-Day Done Right Promise. Upfront pricing, $1,000 off projects over $10,000.

Which Jerith Models This Applies To

Jerith has built kitchen cabinetry and components across several product lines over the years, and the parts are not interchangeable across all of them. The single biggest compatibility gotcha we see in The Hammocks: homeowners order a replacement hinge or drawer glide based on the cabinet’s face style, then find the mounting pattern doesn’t match the original bore. Face style and hardware spec are two different things, and Jerith changed hardware specs across production runs of the same-looking door.

To identify the right part, start with the label inside the cabinet door or on the back panel. It usually carries a model or series reference. If the label’s gone, measure the door overlay (the amount the door covers the frame) and the hinge cup bore diameter. Those two numbers narrow the field fast. On the OEM-versus-aftermarket decision: for visible hardware and any structural component, we lean OEM or a verified equivalent. For glides, bumpers, and shelf pins, a quality aftermarket part often outlasts the original and costs less. We check the spec against your actual unit before anything gets ordered.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Kitchen Remodeling Is Failing

  • Doors that swing open or won’t close flush. Worn or sprung hinges, or hinge screws that have stripped out of softened particleboard. In The Hammocks humidity, the board swells and the screws lose their bite.
  • Drawers that grind or stick halfway. Failed drawer glides, usually the nylon rollers or the metal track itself. A stuck drawer that gets forced accelerates the damage to the cabinet box.
  • Countertop seams lifting or darkening. Moisture working into an unsealed seam. We see this more in kitchens without strong ventilation, where steam sits on the counter edges.
  • Cabinet frames separating at the joints. Adhesive and fastener failure, often from repeated moisture cycling. A gap at the frame means the box is losing structural integrity.
  • Backsplash tiles or caulk lines cracking. Movement in the substrate or a failed caulk joint that’s let water behind the tile. Left alone, it reaches the drywall.

Replacement Cost & What’s Included

Installed pricing in The Hammocks, with parts and labor together:

Scope Installed Range
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: cabinet box count and whether the layout changes, countertop material and edge profile, and whether we’re replacing one failed component or a whole run of cabinetry that’s failing together. Our quotes are line-item, so you see parts and labor separately. The number you see is the number you pay, with no change orders. All work is backed in writing by the 730-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check the label inside your cabinet, measure the overlay and hinge bore, and tighten loose hinge screws with a screwdriver. That’s the limit we’d recommend for most homeowners. Where it goes wrong: stripped screw holes in softened board need filling and re-drilling, drawer glide tracks need the cabinet box square to the frame, and countertop seams require proper sealing or they’ll lift again. Cabinet boxes that are separating at the joints are a structural problem, not a tightening problem. If you’re not sure what’s failing, call us at (844) 761-9356 and we’ll walk you through it before you spend a dollar on a part.

FAQs

How long do Jerith kitchen components last in The Hammocks? Expect 10 – 15 years for cabinet hardware and 15 – 20 for the cabinet boxes themselves in typical South Florida indoor conditions. Humidity and ventilation are the two biggest variables, and kitchens with weak exhaust wear faster.

Can the failing part be repaired instead of replaced? Often yes. Stripped hinge holes, loose glides, and lifted countertop seams can frequently be repaired rather than replaced. We’ll tell you honestly which is the better call for your specific cabinet.

How long does the swap take? Single component swaps usually finish in a single visit. A full cabinet run or countertop replacement is a multi-day job. We’ll give you the timeline in writing before we start.

How do you source the Jerith part? We identify your model from the label or measurements, then source OEM or a verified quality-equivalent. We don’t stock parts, so lead time varies by component; we confirm before order. Call (844) 761-9356 for a free estimate on the exact part.

Get Your Kitchen Back in Order

We also work with KraftMaid, Cambria, and Silestone components if your kitchen mixes brands, and our technicians have up to 12 years of experience matching the right part to the right cabinet. Pricing is upfront and in writing, financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off. Call Groundwork Construction Co. of The Hammocks at (844) 761-9356 for your free estimate and design consult.

Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 761-9356
Local Service Coverage

Request a Free Estimate in The Hammocks

Tell us what you need - Groundwork Construction Co. of The Hammocks responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch