Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Fence Installation: The The Hammocks Owner’s Guide
Jerith aluminum fence installation in The Hammocks typically runs $3,500 to $9,000 for a full residential run, and most jobs are finished in a single visit once the correct posts, panels and pickets are on site. Jerith is a brand-specific system, so the parts have to match your exact model line, not just the color and height. We’re an independent installer, not affiliated with Jerith, and we source the right components for your fence.
Owners usually discover a failing Jerith fence after a storm. A section leans after a week of summer rain, a post rocks in saturated ground, or a gate that closed cleanly in March drags across the walkway by September. In The Hammocks, the combination of sandy soil, high water tables during wet season, and near-constant humidity ages aluminum fences differently than upstate Florida. We see it on the older lots near the Hammocks Trail and along the canal-adjacent streets, where soil stays wet long after a downpour. That’s the pattern we plan around.
Which Jerith Models This Applies To
Jerith builds several aluminum fence lines, and the components aren’t interchangeable. The classic styles (heritage, sculptured, and the ornamental series) use different picket spacing, post caps, and rail profiles. If you’re matching a single panel to a fence that’s been up a while, the fence style and height are the first things we confirm, usually from a sticker inside the post or a photo of the gate hardware. Height matters for compatibility: a 4-foot run and a 5-foot run don’t share the same pickets or the same post length, and getting that wrong means a return trip.
The OEM-versus-aftermarket decision isn’t automatic. Genuine Jerith components match the factory finish and fitment exactly, which matters if you’re replacing one section in the middle of a longer path. Quality aftermarket aluminum can match dimensions and color for whole-run replacement at a lower part cost, but the finish and thickness aren’t identical, and mixing the two on one fence line shows. Our technicians have up to 12 years of experience and will tell you straight which route makes sense for your property.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Fence Installation Is Failing
Fence problems rarely announce themselves. Here’s what to look for before a small issue turns into a full section replacement.
- Posts rocking in the ground. Sand and high water tables in The Hammocks let posts loosen over time, especially where soil stays wet. This usually means the original footing was undersized for the soil, not the post itself.
- Loose or rattling pickets. Fasteners back out or the rail connection wears, so pickets shift and rattle in the wind. Catch it early and the fix is a few fasteners; wait and the rail can crack.
- Rust or corrosion at the joints and footings. Florida humidity and ground moisture attack seams first. Surface blush on a joint is usually cosmetic; bubbling or flaking at the weld means the protective coating has failed.
- Sagging gates and dragging latches. Gate hardware takes the most abuse. Sagging points to hinge wear or a post that’s shifting, and it’s the most common call we get after a storm.
- Leaning runs after heavy rain. A whole section tipping together usually signals footing failure, not a parts failure, and it needs to be corrected before new panels go back up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fence work in The Hammocks falls in a $3,500 to $9,000 range for a typical residential run, and where you land depends on linear footage, height, style, and whether you’re replacing one section or the whole line. A single-panel repair with a matching part sits at the low end; a full aluminum fence install with new footings runs higher. The quote breaks out parts and labor so you can see exactly what the number covers.
| Scope | Installed Range |
|---|---|
| Single section repair or part replacement | $350 – $1,200 |
| Gate rebuild or hardware replacement | $400 – $1,500 |
| Partial run replacement | $2,000 – $5,000 |
| Full Jerith-compatible aluminum fence install | $3,500 – $9,000 |
Every install is covered by our 730-Day Done Right Promise, and pricing is upfront with no surprises. The number you see is the number you pay. Call (844) 761-9356 and a live person answers any hour, any day.
DIY or Call Us?
You can safely walk your fence line and note what’s moving, rusting, or rattling. That inspection helps us quote accurately. What you shouldn’t do is dig out or reset a post footing yourself, or try to re-tension a gate or pull a leaning section back into line. Aluminum fence panels are heavy and awkward, a partly dug footing can tip a run onto you, and an improperly set post in The Hammocks’ sandy soil will fail again within a season. We’ve seen homeowners spend a weekend on a fix that we undo and redo properly. Call (844) 761-9356 to schedule a free estimate. Estimates are free and a live person picks up.
FAQs
A well-installed Jerith aluminum fence typically lasts 20 to 30 years, but the finish and footings are what decide it. Florida humidity and wet-season soil mean the base and the joints age faster here than in drier climates, so a proper footing matters more than the fence style you pick.
Often, yes. A single leaning section, a loose picket, or gate hardware failure can usually be repaired without replacing the whole run. We look at the footing and the finish before recommending a repair, because a part swap over a failing post just fails again.
A single section or gate hardware replacement is usually finished in a single visit. A full run install depends on linear footage and site access, and we’ll give you a realistic timeline with your quote.
We identify your Jerith model from the post label, hardware, or a photo, then match the height, style, and finish before ordering. We’re not affiliated with Jerith, but we know their lines well enough to get the fitment right the first time. We also work with brands like KraftMaid, Cambria, and Silestone for other parts of your home. Call (844) 761-9356 for an exact quote. Estimates are free.
Whether your Jerith fence needs one section or a full replacement, Groundwork Construction Co. of The Hammocks handles parts, labor, and cleanup with upfront pricing and the 730-Day Done Right Promise. Call (844) 761-9356 for a free estimate. A live person answers 24/7, and every technician arrives background-checked and in uniform.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.