Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Home Additions & ADU: The The Hammocks Owner’s Guide
We build Barrette-compatible home additions and ADUs for The Hammocks homeowners, with installed projects typically landing between $45,000 and $130,000 depending on footprint, foundation type, and finish level. ADU construction runs higher, from $90,000 to $220,000 when plumbing, a kitchenette, and separate utilities are included. Most The Hammocks owners start investigating this work when a Barrette addition plan set or pre-engineered component fails: roof panels that have gone soft at the seams, a wall panel showing moisture staining along the base plate, or a connection detail that loosened after a storm season. If you’ve got a Barrette plan number or a failing component and want a straight answer on price and timing, call (844) 761-9356. Live person, 24/7.
Which Barrette Models This Applies To
Barrette doesn’t make a single “addition” product, so the right starting point is identifying what you actually have. The company is best known for fencing, railing, and decking systems, and many homeowners who ask us about a “Barrette addition” are working from an addition that used Barrette deck framing, a Barrette railing system on a second-story balcony, or a screen enclosure kit paired with a Barrette plan set. The model line matters because fasteners, post brackets, and panel dimensions change between series, and a part pulled for one won’t seat in another.
How to identify yours before you call: look for a stamp or label on the rail post, panel bracket, or plan sheet. Barrette plan numbers usually follow a series-plus-number format on the title block. Measure the actual board, panel, or post width in inches – not nominal size – and note the fastener spacing. For additions, the compatibility gotcha is that framing hardware spec’d for one series often won’t pass a The Hammocks inspection if subbed with a generic equivalent, because the embedment depth and coating class differ. On the OEM-versus-aftermarket decision: for structural brackets and rail connections, stay with OEM or a post-manufacturer listing that matches the original spec. For trim and non-structural parts, a quality equivalent is fine and saves money. We’re an independent provider and not affiliated with Barrette, so we specify against the label, not a brand guess.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Home Additions & ADU Is Failing
Most failing components in The Hammocks reveal themselves slowly, then all at once after a heavy summer rain. Here’s what we see and what’s usually behind it.
- Soft or spongy roof panels. Water gets past a seam or a fastener gasket and the panel substrate swells from underneath. By the time you feel it from a ladder, the decking beneath is often compromised too.
- Staining or water lines along the base plate. This is typically a flashing detail failure or a connection that loosened and let water track in. In The Hammocks, the flat, low-slope roofs common on additions hold water longer than they should when drainage isn’t pitched right.
- Loose or wobbly rail and post connections. Usually a fastener that backed out or a bracket that corroded faster than spec because it was the wrong coating class for our salt-laden air.
- Rust streaks at fasteners and brackets. Our humidity and coastal air corrode standard hardware years before the manufacturer’s rating suggests it should. Galvanized parts are the common culprit; hot-dip or stainless holds up far longer.
- Daylight visible at seams. A gap that wasn’t there before means movement in the frame or a shifted panel – both worth checking before the next storm.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what installed work in The Hammocks actually runs. These ranges include parts, labor, and permits, so you’re not adding 20% at the end.
| Project | Installed range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: foundation type (slab versus raised), roof complexity, whether you’re tying into existing electrical and plumbing, and how much finish work you want. A straightforward room addition on a simple slab sits near the low end; a full ADU with its own kitchenette and bathroom lands near the top. We quote parts and labor as separate line items, up front, so you can see exactly what a Barrette-specific component costs versus the rest. Every project carries our 730-Day Done Right Promise, so if it’s not done right, we make it right.
DIY or Call Us?
There’s a safe half and a dangerous half to this work. What you can do yourself: check for water staining, measure and photograph the part label and plan number, feel for soft spots, and note where fasteners have backed out. That information makes the estimate faster.
What you shouldn’t attempt: structural frame repairs, roof panel replacement, and any connection that carries the load of the addition. Getting a structural bracket or a roof panel wrong doesn’t just leak – it can compromise the whole assembly, and in The Hammocks a failed addition connection in a storm is a real safety matter. We recommend a trained professional for anything load-bearing. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and every job is backed by the 730-Day Done Right Promise. Call (844) 761-9356 for a free estimate with no-hassle upfront pricing.
FAQs
Structurally sound parts should last decades, but fasteners, brackets, and roof panel gaskets in The Hammocks often fail in 8 to 15 years because of humidity and salt air. Hardware coating is the usual weak point, so upgrading to hot-dip or stainless when you reinstall buys several extra years. Call (844) 761-9356 for a free estimate on replacement.
Often yes. A single loosened bracket, a backed-out fastener, or a small seam failure can be repaired with the right matching component, which costs far less than a full replacement. We’ll tell you honestly when a repair holds and when replacement is the wiser spend. Call (844) 761-9356 and we’ll give you a straight read.
Most single-part replacements are completed in a single visit, while a larger structural repair may stretch across a couple of days once the permit clears. We’ll give you a real timeline in the estimate, not a guess. Call (844) 761-9356 to schedule a free estimate.
We identify your part from the label, plan number, and measurements, then specify against the original spec so the replacement fits and passes inspection. Where OEM isn’t practical, we use a post-manufacturer listing that matches the original rating. Call (844) 761-9356 for a free estimate; we also work with KraftMaid, Cambria, and Silestone where a project calls for it.
Call (844) 761-9356 for a free estimate. Live person, 24/7, no voicemail, no waiting until Monday. Projects over $10,000 are eligible for $1,000 off and 0% financing for 18 months, and you’ll get a free design consult with your estimate.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.