Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The The Hammocks Owner’s Guide
We handle Barrette-compatible kitchen remodeling across The Hammocks, with full kitchen projects typically landing between $14,000 and $45,000 installed. If you’ve got a failing Barrette cabinet door, a drawer that won’t track, or a hinge pulling out of the frame, we can usually diagnose and fix it on a single visit. Most Hammocks owners find the problem the same way: a soft-close door that slams, a drawer that grinds halfway out, or a cabinet box that’s started to swell near the sink base. Barrette’s stock cabinetry shows up in a large share of the homes built through The Hammocks’ 1990s and early-2000s subdivisions, so we see these failures often and know what causes them.
Which Barrette Models This Applies To
Barrette made a broad range of stock and semi-custom cabinets, and the part you need depends on which line you have. The two things that decide everything are the door overlay and the hinge brand stamped on the plate. Pop a door open and look at the hinge arm: Barrette used several styles over the years, and a 35mm cup hinge from one series will not bolt onto a frame drilled for another. Look for the model label inside a cabinet door or on the back panel of a base cabinet. If it’s gone, measure the door overlay (the distance the door covers the face frame) and the hinge cup bore, and bring those numbers to us. We match to OEM Barrette parts where they’re still produced, and to quality aftermarket equivalents where a discontinued line leaves no other option. Either way, you get an honest answer on what fits and what doesn’t before anything is ordered. For kitchens where Barrette is no longer the right long-term fit, we also work with KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
- Doors that slam instead of soft-closing. The damper in the hinge has worn out, which is the single most common Barrette hinge failure we see.
- Drawers that grind or won’t stay on track. The undermount slide has bent or lost its rollers, usually after years of a heavy pot drawer being overloaded.
- Hinges pulling loose from the frame. Screw holes strip out in particleboard cores, and the door starts to sag and rub the cabinet next to it.
- Swelling or soft spots in the cabinet box. The Hammocks’ humidity and the moisture that collects under a sink base break down the board edges over time.
- Doors out of alignment or rubbing each other. The face frame has shifted or the hinges need adjustment, which shows up as a gap you can’t close.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing depends on how much of the kitchen is involved and how far the failure has spread. Here’s what The Hammocks homeowners can expect, installed:
- Cabinet installation (new boxes and doors): $4,000 – $13,000
- Full kitchen remodel with Barrette-compatible cabinetry: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What drives the range is cabinet count, whether the layout changes, and whether plumbing or electrical has to move. Our quotes are upfront and line-item, so the number you see is the number you pay. Every job is backed by our 730-Day Done Right Promise, and if something’s not right, we make it right.
DIY or Call Us?
Some things you can safely check yourself: whether the hinge screws are stripped, whether a drawer slide has bent, and which model label is inside your cabinet. That’s useful information to have before you call. What goes wrong with DIY is the part match. Replacing a hinge or slide with the wrong size or overlay leaves the door misaligned and can crack the frame bore, and a bad fit on a soft-close mechanism fails again within months. If the cabinet box itself is swelling or soft, or if the layout needs to change, that’s a job for us. There’s nothing dangerous about cabinet work, but there’s a lot of room to spend twice. Call (844) 761-9356 and we’ll tell you straight whether you need a part or a plan.
FAQs
Barrette cabinet boxes typically hold up 15 to 20 years, but in The Hammocks’ humidity the hinges and slides wear faster than the wood. Expect soft-close hinges to start failing around year 8 to 12, especially on cabinet doors nearest the sink and range, where heat and moisture do the most damage.
Often, yes. A stripped hinge screw can be filled and re-drilled, and a worn hinge or slide can be swapped for a matching replacement in under an hour. If the cabinet box behind it is soft or swollen, repair won’t hold and replacement is the honest answer. Call (844) 761-9356 and we’ll look before we recommend anything.
A hinge or slide swap is a same-day job, and a full cabinet replacement runs several days to a couple of weeks depending on scope. We give you a realistic timeline in your free estimate, not a guess. Most part-level repairs are done in a single visit.
We identify your cabinet line from the model label or the hinge and bore measurements, then match to OEM Barrette parts where they’re still made and to quality aftermarket equivalents where they’re not. We source, verify fit, and install, so you’re not guessing on a part number from a listing. Call (844) 761-9356 for a free estimate.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.