Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Fence Installation: The The Hammocks Owner’s Guide
Fence installation for a ECO Window Systems property in The Hammocks typically runs $3,500 to $9,000 installed for a standard residential run. We source ECO Window Systems-compatible hardware and panels through verified supply channels, and most jobs are completed in a single visit. If you’re reading this because a gate stopped latching, a post heeled over after a storm, or a panel section is sagging after two or three wet seasons, you’re in the right place. The failure almost never shows up all at once. It starts with a hinge that won’t sit flush, then a latch that misses the strike, then a corner post that leans a half-inch after the first big rain. By the time an owner calls us, they’ve usually tightened the same bolt three or four times and figured out the post footing is the real problem.
We’re Groundwork Construction Co. of The Hammocks. We’re an independent service provider, not affiliated with ECO Window Systems, and we handle the full scope of the install – sourcing, footings, panels, gates, and cleanup.
Which ECO Window Systems Models This Applies To
ECO Window Systems builds residential and light-commercial fence systems under several product lines, and the part that matters for a repair is the post-anchor and hinge hardware spec for your specific run. You identify it in one of two ways. First, look for a stamp or etched code near the inside face of the gate post or on the latch plate. Second, measure the post’s outside face width and the wall thickness. A common gotcha: nominal post dimensions sold at big-box stores don’t match the ECO Window Systems profile, so a “same size” post swap often sits a few millimeters off and throws the gate swing out. On the OEM-versus-aftermarket question, we use OEM-spec hardware where it’s available and quality aftermarket equivalents where the OEM part has a long lead time. What we don’t do is substitute a thinner gauge anchor to save money. That’s the part that fails in a Florida wind event.
To confirm your model before ordering, check the original install documentation or the label on the gate hinge. If neither exists, we can measure on site during a free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Fence Installation Is Failing
Owners in The Hammocks usually catch the problem after a specific moment – a storm, a gate that suddenly scrapes, a latch that won’t catch. Here’s what to look for, and what it means:
- Gate drags or scrapes at the bottom. The post has shifted in the footing, or the hinge has wallowed out. A scraping gate is a hinge-and-post problem, not a gate problem.
- Latch misses the strike plate by a quarter inch or more. The run has moved. This is a footing issue, not a latch adjustment – tightening the strike won’t fix it.
- Posts lean after heavy rain. The concrete footing has either cracked or was set too shallow. In The Hammocks, our water table and sandy soil make a shallow footing fail within two or three wet seasons.
- Panels sag or bow between posts. The rail connection has loosened, or the post spacing is out of tolerance for a wind-rated install. Both need a real fix, not a zip-tie.
- Rust at the anchor or hinge plate. Salt air and summer humidity accelerate corrosion. Once the plate is rusted through, the hardware loses holding strength and the repair becomes a safety issue, especially on gates.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed fence work in The Hammocks runs $3,500 to $9,000 for a typical residential property. Vinyl fence installation lands in that same band ($3,500 to $9,000), and aluminum fence installation runs $4,000 to $10,000 depending on height, gauge, and gate count. What drives the number up: gate count and swing style, post depth required by your soil and wind exposure, whether a section needs re-footing (rather than a simple panel swap), and material selection – a vinyl privacy run costs less per foot than a powder-coated aluminum run.
Every estimate is a written line-item quote: parts, labor, footing, gates, and disposal. No change orders mid-job. All work is covered by our 730-Day Done Right Promise, which means if the install isn’t right, we come back and make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s the reason our fence installs get a call-back window instead of a handshake.
DIY or Call Us?
Some of this is fair game for an owner. You can safely check gate swing, look for rust at the hinge plate, and measure post-to-post spacing with a tape. What you shouldn’t tackle yourself: resetting a post footing, replacing a hinge plate on a gate with tension on it, or digging out an anchor that’s been set in a cracked concrete footing. A gate carries real weight, and a hinge failure under load can swing free and hit someone – that’s the one safety issue we take seriously on every fence job. If a gate is sagging and the hinge plate shows rust, stop using it until it’s repaired.
For anything beyond a visual check, call (844) 761-9356. Calls are answered by a live person, 24/7 – no voicemail, no waiting until Monday. The estimate is free.
FAQs
Expect 12 to 15 years for a properly footed vinyl or aluminum run in South Florida conditions, though salt air and hurricane-season wind exposure can shorten that to 8 to 10 years on the hardware. The panels often outlast the anchors and hinges – which is why our hardware spec matters more than the panel brand. Call (844) 761-9356 for an exact quote – estimates are free.
Often yes. A gate that drags or a hinge that’s rusted can usually be repaired with new hardware and a footing reset, and that costs a fraction of a full replacement. Full replacement makes sense when more than half the posts have shifted or the panel material has gone chalky and brittle. We’ll tell you which one you’re facing during the free estimate.
Most residential fence installs are completed in a single visit, typically one full day for a standard run. Larger properties with multiple gates or a long run on a corner lot can stretch into a second day. We give you the timeline in writing before work starts.
We source through verified supply channels, using OEM-spec hardware where it’s available and quality aftermarket equivalents where the OEM part has a long lead time. We don’t stock parts on a truck – each part is matched to your specific model and run before we arrive. That’s how we avoid the “same size but doesn’t fit” problem that bites owners who buy from a big-box shelf.
Ready to price your fence project? Groundwork Construction Co. of The Hammocks handles fence installation, repair, and full-scope exterior work across The Hammocks and nearby areas. We also install KraftMaid, Cambria, and Silestone products through our verified brand partners for interior projects. Our technicians have up to 12 years of experience, and every project gets the 730-Day Done Right Promise. Call (844) 761-9356 for a free estimate – upfront pricing, no surprises, and a live person on the other end.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.