Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Bathroom Remodeling: The The Hammocks Owner’s Guide
We install CWS-compatible bathroom remodeling throughout The Hammocks, and a full bathroom remodel typically runs $9,000 – $28,000 depending on scope, fixtures, and layout changes. When a CWS bathroom fixture or finish fails, owners usually notice it the same way: a soft spot underfoot near the shower, a vanity door that won’t stay closed, caulk lines that keep opening back up no matter how many times they’re redone. In The Hammocks, that last one is the most common early signal we see, and it’s rarely just a caulk problem.
Which CWS Models This Applies To
CWS covers a wide spread of bathroom product lines, from prefab shower surrounds and vanity cabinets to tub-shower combos and tile-ready pans. The compatibility gotcha that trips up most homeowners: CWS model numbers for shower pans and surrounds are sized to the rough opening, not the finished footprint, so a “60-inch” CWS pan frequently needs a rough opening that’s a half inch or more different from the drain-to-wall measurement you’d assume. Pull the label from inside the vanity cabinet door or from the edge of the shower pan lip before you order anything, and measure the actual rough opening yourself. For CWS specifically, OEM replacements guarantee a drop-in fit but cost more and can take longer to source; quality aftermarket equivalents often work and save money, but only when the rough-in dimensions and drain position match exactly. We’ll verify that before we quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Bathroom Remodeling Is Failing
- Recurring caulk failure at the shower base or tub edge. The joint keeps opening because the pan or surround is moving slightly, usually from a subfloor that wasn’t fully secured or a pan that’s flexing underfoot.
- Soft or spongy floor near the shower or toilet. Water has been getting past a failed seal for a while, and the subfloor is taking the damage, not the fixture.
- Vanity doors that sag or won’t stay closed. The hinges have pulled from particleboard that swelled after moisture exposure. Replacing the hinge won’t fix it; the cabinet box is the issue.
- Cracks at the shower pan corners or along the surround seams. CWS acrylic pans crack at stress points when the floor beneath them deflects, which is common in older slab and wood-subfloor homes around The Hammocks.
- Persistent musty smell after every shower. Moisture is trapped behind the surround or under the pan, and by the time you smell it, the wall board behind the tile is usually compromised too.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In The Hammocks, a full bathroom remodel runs $9,000 – $28,000. A smaller bathroom remodel is $5,000 – $12,000, a walk-in shower installation is $4,500 – $12,000, a tub-to-shower conversion is $3,500 – $10,000, a shower replacement is $3,000 – $8,500, and a vanity installation is $800 – $3,000. What drives the range: whether the pan or surround is a straight swap or needs rough-in correction, whether the subfloor is sound, and fixture grade. We quote parts and labor as separate line items, and our upfront pricing means the number on the quote is the number you pay. All work is covered by our 730-Day Done Right Promise.
DIY or Call Us?
You can safely pull the model label, measure your rough opening, and check for soft floor or active leaks. Where DIY goes wrong on a CWS bathroom job: pulling a shower pan or surround almost always means opening the wall and floor behind it, and the water damage you find is usually worse than the symptom suggested. Get that wrong and you’re redoing a waterproofing layer that has to be right the first time. Call (844) 761-9356 and we’ll tell you honestly what’s a swap and what’s a rebuild.
FAQs
How long does a CWS shower pan or surround last? A properly installed CWS pan or surround typically lasts 15 – 25 years, but in South Florida humidity and with a subfloor that flexes, expect the lower end of that unless the pan is fully supported underneath. Call (844) 761-9356 for a free estimate on your specific setup.
Can it be repaired instead of replaced? Sometimes. A failed caulk joint or a loose vanity hinge can be repaired, but a cracked pan or a surround with moisture behind it can’t be patched reliably. We’ll inspect and tell you which one you’re facing before you spend anything.
How long does the swap take? A straight pan or surround replacement is typically one to three days once materials are on site; a job with subfloor repair or a layout change runs longer. We give you the real timeline upfront, not a best-case guess.
How do you source the CWS part? We verify your model number and rough opening first, then source the OEM replacement or a dimension-matched equivalent, whichever is faster and fits correctly. We don’t claim to stock parts or carry them on a truck; we source to your job.
We’re an independent service provider, not affiliated with CWS. We also service KraftMaid, Cambria, and Silestone products. For a free estimate, call (844) 761-9356.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.