Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The The Hammocks Owner’s Guide
We install CGI fence installation throughout The Hammocks, with most complete fence projects running $3,500 to $9,000 installed depending on footage, material, and gate count. If you’ve got a CGI fence panel that’s heaving, leaning, or letting the dog out, we can walk your property, match the exact product line, and quote you a written line-item price – usually within a day or two of your call. We’re an independent service provider, not affiliated with CGI, but we’ve installed enough of their fencing to know the compatibility details that trip up other crews.
Most owners in The Hammocks don’t discover a failing CGI fence installation by reading a manual. They find it the same way everyone does: a post starts leaning after a storm, a panel sags and won’t latch, or the gate drags on the pavers and won’t close flush anymore. One week it’s cosmetic. The next, the fence line has shifted enough that it’s a security concern.
Key Takeaways
- CGI fence installation in The Hammocks typically runs $3,500 to $9,000 installed.
- Matching your exact CGI panel series is the whole job – wrong specs mean panels that don’t seat or latch.
- South Florida humidity and hurricane-season wind loads are the two biggest reasons CGI fences fail early here.
- We provide written estimates, and every install is backed by our 730-Day Done Right Promise.
Which CGI Models This Applies To
CGI builds fencing across several product families – vinyl privacy, aluminum ornamental, and hybrid systems – and the panels are not interchangeable between lines. The line that matters is usually molded into the post cap, stamped on the rail connector, or printed on the original installation paperwork the builder left behind. If you can’t find it, measure the rail spacing, the panel height, and the post dimensions down to the sixteenth of an inch. Those three numbers tell us almost everything.
Here’s the compatibility gotcha most homeowners miss: CGI has revised rail profiles over the years, and an older panel won’t seat cleanly into a newer post bracket even when the nominal height matches. That’s why we always pull the actual measurements off your existing fence before quoting – not the model number from memory. On the OEM-versus-aftermarket question, CGI-branded replacement panels are the cleanest match when your fence is under warranty or under a decade old. For older lines where the original profile is discontinued, a quality aftermarket equivalent from a verified supplier is often the better call – and we’ll tell you plainly which side of that line your fence sits on. The same sourcing discipline applies across our other brand partners like KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Fence Installation Is Failing
Fence failures in The Hammocks follow a pattern. Here’s what to watch for and what’s actually happening underneath.
- Posts leaning after a storm. South Florida’s summer wind loads and saturated soil are brutal on fence footings. When a post leans, the concrete footing has usually failed or was set too shallow to begin with – and no amount of re-plumbing fixes a bad footing.
- Panels sagging or separating from the rails. This is almost always a hardware failure – corroded screws, failed rail brackets, or a top rail that’s warped from heat cycling. The vinyl or aluminum itself is usually fine; the connections aren’t.
- Gate dragging or not latching. Gates take more load than any other part of the fence. When a gate sags, it’s usually hinge wear combined with post movement – both need to be addressed or the new gate will sag too.
- Discoloration, chalking, or cracking on panels. Our UV index and year-round humidity accelerate vinyl aging faster than in most of the country. Panels that look chalky or hairline-cracked are losing structural integrity at the edges.
- Loose or missing post caps and rail covers. Small part, big problem – missing caps let water into the post interior, which is where rot and rust start. If your caps are popping off, water is already getting in.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For The Hammocks, a complete CGI fence installation project runs $3,500 to $9,000, with the number landing in that band depending on three things: total linear footage, material line (vinyl sits lower, aluminum ornamental sits higher), and gate count. A simple vinyl privacy run on a standard lot lands near the low end. A long aluminum perimeter with multiple gates pushes toward the top.
Our quotes are written line-item, not lump sum – you see the footage, the material, the hardware, and the labor broken out separately. There are no change orders lurking in the fine print. If we discover a footing that needs replacement once we’re on site, we tell you before we touch it and quote the addition in writing. Every install carries our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. And if the project runs over $10,000, you get $1,000 off – with 0% financing for 18 months available if you’d rather spread the cost.
DIY or Call Us?
You can absolutely handle some of the diagnosis yourself. Walk the fence line after a rain and mark every leaning post. Check the gate hinges for play by lifting the gate slightly. Photograph any cracks or chalky panels with a tape measure in frame. That information makes our estimate faster and more accurate.
What we don’t recommend is pulling and re-setting posts yourself. A fence post that looks shallow is often deeper than it appears, and digging near buried utility lines in The Hammocks is a real hazard – call 811 before any digging regardless of who does the work. Beyond that, fence installation on a slope or with a curved layout requires string-line and laser work that weekend projects rarely get right, and a bad footing will fail again within a Florida rainy season or two. That’s how a $400 DIY fix turns into a $3,500 redo.
Call (844) 761-9356 to schedule your free estimate. Live person, 24/7 – no voicemail, no waiting until Monday.
FAQs
A properly installed CGI fence typically lasts 15 to 20 years in South Florida, though our UV index and humidity mean vinyl panels can start showing wear closer to the 12-to-15-year mark without maintenance. The footing and hardware usually fail before the panels do. Call (844) 761-9356 and we’ll give you an honest read on your specific fence – the estimate is free.
Often, yes. Isolated panel damage, a single failed gate, or a handful of bad post caps can be repaired without replacing the whole run. The line gets crossed when two or more posts have failed footings or the panels show widespread cracking – at that point, repair costs start approaching replacement costs. We’ll tell you which side you’re on. Call (844) 761-9356 for a free assessment.
A standard residential run in The Hammocks takes two to four days of working time, with larger properties or complex gate work taking longer. Weather and footing conditions are the two biggest variables. We schedule the full job upfront and give you a realistic timeline in writing before we start. Call (844) 761-9356 to get your project on the calendar.
We identify your CGI product line by measuring the existing panels, rails, and posts, then match to the correct OEM or verified aftermarket equivalent based on what’s actually compatible – not what’s on a spec sheet. On discontinued lines, we source equivalent-profile panels from verified suppliers and confirm fit before ordering. Call (844) 761-9356 to start the matching process – the estimate is free.
Whether your CGI fence needs a single panel replaced or the entire perimeter re-installed, Groundwork Construction Co. of The Hammocks has the parts knowledge, the written pricing, and the 730-Day Done Right Promise to get it done right. Our technicians have up to 12 years of experience installing and repairing fencing throughout The Hammocks and nearby areas. Call (844) 761-9356 today for your free estimate.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.