Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The The Hammocks Owner’s Guide
CGI-compatible kitchen remodeling in The Hammocks typically runs $14,000 to $45,000 installed, depending on cabinet layout, countertop material, and whether the project stays cosmetic or moves plumbing and electrical. We schedule a free design consult and estimate rather than promising a swap today, because a kitchen is planned work. Most The Hammocks owners discover the problem the same way: a drawer that drags on one corner, a cabinet box that has gone soft under the sink, a countertop seam lifting, or a hinge that will not hold after the screws strip out.
Key Takeaways
- Installed range for The Hammocks kitchens: $14,000 to $45,000, with small kitchens at $9,000 to $20,000.
- Cabinet installation alone is $4,000 to $13,000; countertops are $2,000 to $6,500.
- Every project is covered by the 730-Day Done Right Promise, and the quote you sign is the price you pay.
- A failed hinge or a soft cabinet floor is worth fixing before it spreads into the boxes beside it.
Which CGI Models This Applies To
CGI is a cabinet and component label, and the part that fits depends on which series the box came from. Before ordering anything, read the label inside the door or on the back panel. It usually lists the series, box depth, and door overlay. Measure the cabinet opening, the door thickness, and the hinge cup bore yourself, because a 35mm cup on a 110-degree clip hinge is not the same fit as a European-style full-overlay hinge from a different series. Those few millimeters decide whether a door closes flush or rubs the frame.
CGI parts are not universal. A hinge that drops into one series will not seat in another, and drawer glide brackets vary by box depth. That is where a lot of The Hammocks homeowners get burned ordering online: the part looks identical in the photo and does not fit. OEM CGI parts are the safe match when the label is legible. A quality aftermarket equivalent is a reasonable choice for standard hinges, glides, and shelf pins if the spec matches exactly. For doors, cabinet boxes, and countertops, the fit is the whole job, so we source to the label and measure to the opening. We work as an independent installer and are not affiliated with CGI; we also handle KraftMaid, Cambria, and Silestone cabinetry and tops if you want to change the look entirely.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Kitchen Remodeling Is Failing
- Drawers that drag or pop off the glide. The glide bracket or the box side has worn or split. Under-filled stock and years of humidity in The Hammocks push the screws loose.
- Soft or sagging cabinet floor under the sink. Leaks and the region’s sustained humidity break down the particleboard. Once the panel swells, it will not recover; it has to be cut out and replaced.
- Doors that will not stay aligned. A stripped hinge screw or a hinge that has lost tension. Re-tightening helps once, not twice, because the screw hole enlarges every time.
- A countertop seam that lifts or a backsplash edge that pulls away. Adhesive failure or movement beneath the top. Water gets behind it and starts working on the substrate.
- Mildew smell that returns after cleaning. Moisture trapped in the cabinet base or behind the backsplash. In The Hammocks, this is often the first sign a leak has been running quietly for months.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for The Hammocks, parts and labor:
- Full kitchen remodel: $14,000 to $45,000
- Small kitchen remodel: $9,000 to $20,000
- Cabinet installation: $4,000 to $13,000
- Countertop installation: $2,000 to $6,500
- Backsplash installation: $800 to $2,500
- Kitchen island installation: $3,000 to $10,000
The number moves on cabinet count, material grade, and whether plumbing or electrical has to move. We give a written line-item quote up front, so you see the parts cost and the labor separately. The quote you sign is the price you pay; no change-order surprises when the old cabinets come out and the wall behind them is worse than expected. Every job is backed by the 730-Day Done Right Promise.
DIY or Call Us?
You can safely tighten a loose hinge, adjust a glide, or clean behind a backsplash yourself. Those are low-risk checks. Hinges, drawer glides, and shelf pins are the parts an owner can often match and swap. What goes wrong is guessing the fit, forcing a hinge into an oversized bore, and splitting a door or box that was fine. Cabinet, countertop, and backsplash work involves cutting, securing to structure, and sealing against moisture. That is where a small failure becomes a water problem in a South Florida kitchen.
One caution worth saying plainly: do not attempt to pull a cabinet box away from a wall or move a countertop yourself. Gas lines, wiring, and plumbing can run behind and beneath them, and a mistake there is genuinely dangerous. Our technicians are trained for that work. Call (844) 761-9356 to schedule your free estimate. A live person answers any hour.
FAQs
How long do CGI-compatible cabinets and parts last in The Hammocks? Hinges and glides typically give 8 to 15 years before you see real wear; cabinet boxes can last decades if the base stays dry. The Hammocks humidity is the wildcard, because a hidden leak shortens that to a few years.
Can a failed part be repaired instead of replaced? Sometimes. A stripped hinge screw can be repaired with a wood insert; a split glide generally cannot. We check the box condition first, because repairing a hinge on a soft door is wasted money. Call (844) 761-9356 for an exact quote.
How long does the swap take? A single-door or drawer repair is often a same-visit fix. A full cabinet or countertop swap is a planned job, not a same-day installation. Most jobs run a few days depending on the scope and material delivery.
How do you source the part? We read the CGI series label, measure the opening, and order to spec from the CGI line or a quality equivalent that matches. We do not carry parts on a truck, so we source the right match for your box.
Call (844) 761-9356 for a free estimate and design consult. Groundwork Construction Co. of The Hammocks gives you upfront pricing, background-checked technicians, and the 730-Day Done Right Promise. Ask about 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.