Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Windows & Doors: The The Hammocks Owner’s Guide
We install and replace Tamko-compatible windows and doors across The Hammocks, and most residential window replacement projects here run $4,500 to $15,000, while impact-rated installations run $8,000 to $25,000. Tamko supplies the components that make up a door or window system – the sills, thresholds, weatherstripping, glazing seals and hardware – not the finished window or door assembly itself, so when you look up “Tamko windows & doors” you’re almost certainly tracking down a failed part inside a Tamko system, not a whole new unit.
That matters because most The Hammocks owners find us after something specific breaks: a door threshold that’s letting water in during a summer downpour, weatherstripping that’s gone brittle and stopped sealing, or a window seal that’s fogged over so badly you can’t see the lake. Each of those points to a failed Tamko component, and each has a repair path that doesn’t always mean tearing out the whole unit.
Which Tamko Models This Applies To
Tamko parts compatibility is the part everyone gets wrong. The company makes door and window components across several lines, and the part that fits one series often won’t fit another – a threshold sized for a standard 36-inch door opening isn’t interchangeable with one built for a wider slider, and the profile depth varies enough that a generic replacement leaves a gap open to The Hammocks rain. Before you order anything, find the identification label on the door jamb or window frame itself. It’s usually a small sticker on the hinge side or top of the sash, listing the series, the model, and the rough opening size. Photograph it and measure twice: the opening width, the height, and the sill depth. That label is your part number; without it you’re guessing.
Then you face the OEM-versus-aftermarket call. Tamko’s own components fit exactly and match the finish, but they cost more and take longer to arrive. A quality aftermarket equivalent – correct thickness, correct profile, stainless or vinyl hardware rated for coastal humidity – can save 20% to 40% and perform just as well when it’s spec’d right. Here in The Hammocks, where salt air and afternoon storms push moisture into every seam, we lean toward the aftermarket part if it’s rated properly and reach for OEM when the fit is unusual. We’re an independent service provider, not affiliated with Tamko, so we source the right part for your unit, not the one with the highest markup.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Windows & Doors Is Failing
Tamko components fail in predictable ways, and each symptom tells you what’s happening underneath.
- Water at the threshold or sill. A cracked, warped, or water-logged sill lets rain in. In The Hammocks, summer downpours find that gap fast, and the first sign is usually a damp spot or a stain line.
- Drafts and whistling during wind. Worn or brittle weatherstripping has lost its seal. The gap is small, but it lets the AC work harder all summer and lets water wick in during storms.
- Fog, condensation, or a haze between the panes. The seal bonding the glass to the frame has failed, and moisture has gotten into the glazing. Once that seal breaks, the insulating value is gone for good.
- Sticking, dragging, or sagging doors and windows. Worn rollers, hinges, or track hardware cause the sash to bind. Left alone, a dragging track wears the frame and can crack the glass.
- Rust, pitting, or finish peeling on the hardware. Coastal humidity and salt air eat hardware from the outside in. This failure is common on The Hammocks homes near water, where exposed metal corrodes faster than inland.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
What you’ll pay depends on whether you need a component swap or a full unit replacement. Here’s how it breaks down in The Hammocks:
| Work | Installed Price Range |
|---|---|
| Component repair (weatherstripping, sill, threshold, hardware) | Typically $150 – $600 |
| Window replacement | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
The range moves with unit count, glazing type, whether the opening is out-of-square, and how much framing repair the old unit left behind. The number we quote includes parts and labor, and it’s upfront pricing with no surprises: the number you see is the number you pay. All of it is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. No-hassle upfront pricing and 0% financing for 18 months are available, and projects over $10,000 qualify for $1,000 off.
DIY or Call Us?
Some of this is safe to check yourself, and some of it belongs to a trained professional. You can inspect your Tamko components for wear, photograph the identification label, measure the openings, and clean the tracks and weatherstripping – that’s genuinely useful information to have before you call anyone.
But replacing glazing seals, resetting a sagging door frame, or installing a new sill so it actually keeps water out is a different job. A window or door is your building envelope; get it out of square or under-sealed and you invite water into the wall cavity, which is a repair that dwarfs the original cost. On a second-floor unit, working at height matters too. That’s the line where we step in. Our technicians have up to 12 years of experience, and we’ll tell you honestly whether you need a part or a whole unit. Call (844) 761-9356 to schedule your free estimate – a live person answers, 24/7, and we’ll give you an exact quote before anything starts.
FAQs
How long does a Tamko window or door component last in The Hammocks? Expect 10 to 15 years on weatherstripping and hardware with coastal sun and humidity exposure, with thresholds and sills running longer if they’re cleaned and kept sealed. Homes near the water see hardware fail faster, so check it every year. Call (844) 761-9356 for an inspection – estimates are free.
Can a failed Tamko seal or component be repaired instead of replaced? Often yes, and that’s the first thing we check. Worn weatherstripping, cracked sills, and hardware can be swapped without a full unit change; fogged sealed glazing usually means a new sash or unit. We’ll tell you which you need before you spend a dollar. Call (844) 761-9356 for an honest assessment.
How long does the swap take? A single component or hardware change is usually done in one visit. A full window or door replacement depends on the opening, the unit count, and any framing repair – we’ll give you the timeline in writing with your quote. Most jobs are completed in a single visit.
How do you source the right Tamko part? We identify your unit from its series and model label, measure the opening, and match the part to spec – OEM when fit is critical, a quality aftermarket equivalent when it performs equally well. You get a part that fits and holds up to The Hammocks weather. Call (844) 761-9356 to get started.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.