A Groundwork company - serving The Hammocks, FL

Atlas Windows & Doors in The Hammocks, FL

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Windows & Doors: The The Hammocks Owner’s Guide

We install Atlas-compatible windows and doors across The Hammocks, and most full replacements run $4,500 – $15,000 for standard windows or $8,000 – $25,000 for impact-rated units, with single-part swaps typically wrapped into a scheduled visit rather than a same-day emergency call. Owners usually find out a part has failed the same way every time: a window that won’t latch shut, a door that drags and won’t seal, or condensation trapped between panes after a summer storm. In The Hammocks, where afternoon thunderstorms hammer west-facing glass from May through October, those failures show up faster than homeowners expect. We’re an independent service provider, not affiliated with Atlas, so we match the correct part to your actual model before anyone touches a frame.

Call (844) 761-9356

Which Atlas Models This Applies To

Atlas has built windows and doors across several product families over the years, and the part that fits one series won’t fit another. Single-hung and double-hung units use different balance assemblies and tilt-latch hardware than horizontal sliders or casement operators, and impact-rated Atlas lines use heavier hardware than standard non-impact units. The model and series are stamped on a label in the frame’s jamb channel, usually visible when you open the sash or look along the head track. If the label is gone, we measure the rough opening and glass unit dimensions directly rather than guessing. On the OEM-versus-aftermarket question: Atlas original parts give an exact fit, but quality aftermarket equivalents for common hardware like balances, rollers, and weatherstripping are widely available and often comparable. For structural components and impact-rated glass, we lean OEM. For wear parts, aftermarket is often the practical call. We verify compatibility against your model before ordering anything for The Hammocks homes.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Windows & Doors Is Failing

  • The sash won’t stay up or drops on its own. The balance assembly has lost tension or snapped, which happens faster in Florida heat cycling than in cooler climates.
  • Condensation or fogging between the panes. The sealed glass unit’s perimeter seal has failed, letting humid The Hammocks air inside the insulated cavity. Once fogged, the glass unit needs replacement, not a wipe-down.
  • The lock or latch won’t engage. Hardware wears, the frame shifts, or the keeper moves out of alignment. A window that won’t lock is a real security gap, not just an annoyance.
  • The door drags, sticks, or won’t seal at the threshold. Hinge wear, a sagging slab, or a failed sweep and weatherstripping lets in water and drives up cooling costs during The Hammocks summers.
  • Water stains or soft wood at the sill or frame. Failed sealant and flashing let rain in, and by the time you see a stain the damage is often already behind the wall.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In The Hammocks, window replacement runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000 depending on size, count, and rating. The range moves with the number of openings, whether you’re matching impact-rated glass, frame material, and how much trim and finish work the job needs. We quote parts and labor as separate line items so you see exactly what the hardware costs and what installation costs, with upfront pricing and no surprises. Every job carries our 730-Day Done Right Promise, backed in writing. If the workmanship fails, we make it right, and no part of that guarantee shrinks because it involved a part swap.

DIY or Call Us?

Some checks are safe for any homeowner: confirm the model label, test whether the sash drops or the lock aligns, and look for fogging between panes. Beyond that, we’d stop you. Window and door glass units are heavy and fragile, impact-rated units are especially so, and a dropped sash or a mis-set frame can turn a part replacement into a water intrusion problem. Hardware replacement that requires removing the sash from the frame is where most DIY attempts go wrong, and on doors and windows in The Hammocks, a poor seal invites the rain in. Most jobs are completed in a single visit once the correct part is in hand. For anything beyond a visual check, call us at (844) 761-9356.

FAQs

How long do Atlas window and door parts last in Florida? Wear parts like balances, rollers, and weatherstripping typically last 8 – 15 years in our climate, and The Hammocks heat and humidity push toward the shorter end. Sealed glass units often fail sooner when the perimeter seal gives out. Call (844) 761-9356 for an exact quote on your model, and estimates are free.

Can the part be repaired instead of replaced? Sometimes. A balance, latch, or weatherstripping swap is a straight part replacement, while a fogged glass unit or a cracked frame means replacing that component outright. We tell you which situation you’re in before you commit. Call (844) 761-9356 for a free assessment.

How long does the swap take? A single hardware part usually takes under an hour, and a full window or door unit is typically a same-visit job once the correct part is on site. We schedule around the order, not the other way around. Call (844) 761-9356 to set your free estimate.

How do you source the right Atlas part? We read your model label or measure the opening, confirm the series and rating, then order the OEM or the correct aftermarket equivalent. We don’t guess and we don’t stock parts on a truck, so the fit is verified before we arrive. Call (844) 761-9356 to get started.

We also work alongside KraftMaid, Cambria, and Silestone on the interior side when a project runs from window to finish. From foundation to finish line, Groundwork Construction Co. of The Hammocks handles the whole scope with brands we’ve vetted and a guarantee we put in writing. Calls are answered by a live person, 24/7, and our background-checked, uniformed technicians bring up to 12 years of experience to every job. Call (844) 761-9356 to schedule your free estimate, and we’ll take it from there with upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000.

Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 761-9356
Local Service Coverage

Request a Free Estimate in The Hammocks

Tell us what you need - Groundwork Construction Co. of The Hammocks responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch