Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Kitchen Remodeling: The The Hammocks Owner’s Guide
A CertainTeed kitchen remodeling install in The Hammocks typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop square footage, and whether the project includes a full tear-out. That figure covers what a qualified crew actually installs: materials, labor, permits, and the trim-out that finishes the room. Because CertainTeed is a building-products manufacturer (siding, roofing, drywall, ceilings) rather than a kitchen-cabinet brand, most Hammocks homeowners discover a problem when their contractor’s “CertainTeed kitchen package” turns out to use a mix of CertainTeed backing and moisture barrier material with generic cabinets and countertops that have no CertainTeed label. The first sign is usually a spec sheet that lists “CertainTeed” as the kitchen brand rather than the specific product. That mismatch matters when a panel blisters, a cabinet face fails, or a countertop edge delaminates before the warranty window closes.
Key takeaways:
- CertainTeed makes moisture-resistant drywall, backing board, and ceiling panels used in kitchens – not cabinets, countertops, or islands.
- Installed kitchen remodel in The Hammocks: $14,000 – $45,000. Small kitchen: $9,000 – $20,000.
- Label-check every CertainTeed product before your contractor’s first delivery. No label, no spec.
- 732-Day Done Right Promise on the workmanship, not just the material.
- Written, line-item quotes before you sign anything.
Which CertainTeed Models This Applies To
CertainTeed doesn’t sell “kitchen remodel series” numbers the way KraftMaid sells cabinet door styles. The CertainTeed products that show up inside a kitchen are specific – and worth knowing by name so you can spot a real one on a job site in The Hammocks:
- Mold & Mildew Resistant Drywall (DensArmor or similar): the paperless-faced panel installed behind cabinets, backsplash, and around sink alcoves. This is the most common CertainTeed product in a South Florida kitchen because the humidity here eats standard paper-faced drywall for breakfast.
- GlasRoc sheathing panels: used as a substrate under tile backsplashes and tile walls. Moisture- and mold-resistant gypsum with a fiberglass mat face.
- Ceilings: CertainTeed mineral fiber and fiberglass ceiling panels and the grid systems they snap into. Rare in Hammocks homes, but occasionally specified in screened patios converted to breakfast nooks.
- Insulation (CertainTeed Sustainable Insulation): batt insulation inside kitchen-adjoining exterior walls. If your contractor touts it as a kitchen brand, that’s an insulation upgrade, not a kitchen brand.
Identifying the right product means reading the printed label on the panel, not the marketing sheet. Every CertainTeed panel carries a series name and thickness (½” or ⅝”) on the edge stamp. Measure the panel, photograph the stamp, and match the thickness before a contractor substitutes a low-cost equivalent. On OEM vs. aftermarket: there’s no aftermarket market for CertainTeed-branded drywall and ceiling panels the way there is for garage-door springs or window balances. There are only legitimate equivalents (National Gypsum Gold Bond XP, USG Sheetrock Brand EcoSmart) and cheap equivalents (generic paper-faced “moisture resistant” board). The legitimate equivalents meet the same ASTM standards as CertainTeed’s product and can be a fair substitute when a specific CertainTeed panel line isn’t available in The Hammocks. The cheap equivalent is what causes the second failure in five years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Kitchen Remodeling Is Failing
In The Hammocks, kitchen moisture issues bite faster than most of the country because the outside humidity hovers in the high seventies year-round and air conditioning runs nine to ten months. Here’s what fails first.
- Blistering or bubbling on the wall behind the backsplash. Almost always a moisture vapor problem, not a paint problem – water is getting behind the tile and finding the paper face of standard drywall. If the panel is a CertainTeed moisture-resistant board, the water is coming from above or from a failing caulk joint, and the panel may still be salvageable.
- Soft spots around the sink alcove or dishwasher. Prolonged water exposure on the wrong substrate. Poke the drywall with a screwdriver tip. If it dents like cardboard, the panel is done.
- Visible dark staining or musty odor within 2 – 6 weeks of a leak. Mold growth on the panel face. DensArmor resists mold growth on its surface but doesn’t stop a persistent leak, and it will still support mold growth on dirt or food residue if water stays.
- Ceiling panel sag or grid misalignment. CertainTeed ceiling panels absorb humidity on their back face and sag at the edges. In a Hammocks kitchen that means a corner behind the fridge or over the sink drops half an inch before you notice.
- Cracks along the drywall-to-cabinet seam. Not a drywall failure – usually cabinet settling or missing backing. Sometimes misdiagnosed as a panel problem.
Replacement Cost & What’s Included
Installed kitchen remodel pricing in The Hammocks – the number you actually pay, not the material line on a bid:
| Scope | Installed Price Range |
|---|---|
| Full kitchen remodel (standard size) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet grade and layout complexity, countertop material (quartz from Cambria or Silestone lands near the top of the countertop range; laminate at the bottom), whether plumbing and electrical need relocating, and whether the CertainTeed panel behind the backsplash is salvage or full replacement. Pricing is upfront and line-item – no “allowance” placeholders with a surprise change order later. All work is covered by the 732-Day Done Right Promise. If the CertainTeed panel or ceiling grid fails on our install within that window, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
A Hammocks homeowner can safely handle: photographing the CertainTeed edge stamp before demolition, poking the sink-alcove drywall with a screwdriver to check for softness, re-caulking a backsplash seam that’s pulling water, and pulling the ceiling panel that’s sagging to see what’s behind it. What goes wrong fast in a DIY kitchen: patching a moisture-resistant panel over an active leak (the new panel fails in weeks, not months), tiling over GlasRoc with the wrong thinset (the panel face delaminates), and popping a ceiling panel to check the grid and then reinstalling it without the correct cross-tee clips – the panel drops within a season. If your backsplash panel is soft and the leak source is unknown, that’s a call-the-pro moment. Call (844) 761-9356 and we’ll walk you through what to look at before anyone gets a hammer out.
FAQs
A properly installed CertainTeed moisture-resistant panel will run its 20-plus-year service life in a South Florida kitchen as long as the source of water is fixed – panels don’t fail on their own, water behind them does. Ceiling panels in air-conditioned interiors last longer than the grid clips holding them, so inspect clips every five years. Call (844) 761-9356 for a free estimate on replacement before a soft panel becomes a mold job.
Yes, when the panel isn’t soft. Surface mold on DensArmor or GlasRoc cleans up with a proper antimicrobial treatment if the panel still takes a screwdriver without denting. If the panel is soft, bubbled, or has mold behind it, replacement is the honest answer. Call (844) 761-9356 and we’ll tell you straight over the phone which one you’re looking at.
Backsplash panel replacement in a Hammocks kitchen is typically a two- to three-day job once materials are on site, including tile removal and finish. A full kitchen remodel is six to ten weeks depending on cabinet lead times. Most single-part repairs get done in one visit; the estimate visit itself is free.
Through verified building-products supply channels, matched by the series name and thickness stamped on your existing panel edge – not by a photo of the wall. No shop stocks every CertainTeed panel line locally, so we confirm availability before the schedule is locked. Our technicians have up to 12 years of experience reading those labels and matching the panel right the first time. To note: Groundwork Construction Co. of The Hammocks is an independent service provider, not affiliated with CertainTeed. We also work with KraftMaid, Cambria, and Silestone for the kitchens we build in The Hammocks.
Ready to Price Your Kitchen?
Call Groundwork Construction Co. of The Hammocks at (844) 761-9356 for a free estimate and free design consult. Every quote is line-item, every install is covered by the 732-Day Done Right Promise, and every project over $10,000 takes $1,000 off with 0% financing available for 18 months. Live person, 24/7 – no voicemail. A CertainTeed-labeled kitchen that was installed to spec six years ago shouldn’t be soft today. If it is, that’s a call worth making.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.