A Groundwork company - serving The Hammocks, FL

Schluter Windows & Doors in The Hammocks, FL

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Windows & Doors: The The Hammocks Owner’s Guide

We install Schluter-compatible windows and doors for The Hammocks homeowners, with most full replacement projects running $4,500 – $15,000 and impact-rated units landing at $8,000 – $25,000. When a single component fails (a hinge, a sash balance, a threshold, a handle set), the fix is usually a same-week repair, not a full replacement, and we can tell you which one you’re facing within a few minutes on the phone. Owners in The Hammocks typically discover the problem the same way: a window that won’t stay up, a door that drags on the track, water staining the drywall under a sill after an afternoon storm. That’s the moment to get a straight answer, not a sales pitch for new windows.

Call (844) 761-9356

Which Schluter Models This Applies To

Schluter systems show up in The Hammocks in two main placements: window and door trim profiles (the thin metal or PVC edge pieces that finish a wall return around a rough opening) and the transition and sealing components around exterior openings. Before we quote anything, we need the profile family, the dimension stamp, and the finish code, because two pieces that look identical on a shelf can be off by 1/8 inch and won’t seat. Most profile markings are printed on the reverse face or on the original packaging sleeve.

The identifying steps:

  • Measure the reveal, not the face. The face width tells you the family. The reveal dimension is what determines fit. A profile that’s “close” will telegraph a gap line across the wall.
  • Photograph the packaging or routing label. The code on the sleeve is the fastest route to the exact part. Send us the photo and we’ll match it.
  • Note the wall build-up. Schluter profiles are dimensioned to the tile or panel thickness they edge. If a previous owner redid the wall, the original profile may no longer be the right one.

On the OEM-versus-aftermarket call: for visible trim, we recommend the OEM piece because finish and profile geometry are the whole point, and a mismatch is visible on every walk past it. For concealed sealing and transition components, a quality equivalent is often the smarter spend, since nobody sees it and the price gap is real. We’re an independent service provider, not affiliated with Schluter, so our recommendation is based on fit and lifespan, not a parts margin.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Windows & Doors Is Failing

Here’s what we actually see on The Hammocks jobs, and what each symptom means underneath.

  • A window sash that slides down on its own. The balance mechanism has lost tension or the shoe has worn. This is a mechanism failure, not a glass or frame problem, and it’s one of the more affordable fixes we do.
  • Water staining or soft drywall under a sill after a storm. The perimeter seal or the sill pan flashing has failed. South Florida’s wind-driven rain finds these gaps fast, and a slow leak that only shows during heavy weather is the one that does the most hidden damage.
  • A door that drags, catches, or needs a shoulder to close. Either the hinge has sagged or the threshold profile has shifted. On exterior doors in The Hammocks, the constant humidity cycling of the frame is often the underlying cause.
  • A visible gap line or lifting edge along the trim profile. The trim has debonded from the substrate, usually because the adhesive or sealant aged out. Caulk over the top of it hides the problem for one season and then it returns.
  • Fogging between the panes on a sealed unit. The seal has failed and moisture has entered. This one isn’t repairable at the part level. The insulated glass unit has to be replaced, and that’s the point where we quote a window replacement rather than a component fix.

Notice that four of those five are component-level repairs. Owners often assume a fogged or stubborn window means a whole-house job. It rarely does.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s the honest The Hammocks price picture. Component-level repairs and profile replacements generally fall into the lower bands; full window and door replacement sits in the upper bands, and impact-rated units are priced separately.

Scope Installed Range (The Hammocks)
Trim profile or threshold component replacement Quoted per opening, typically well under a full window swap
Window Replacement $4,500 – $15,000
Impact Window Installation $8,000 – $25,000

What drives the range: the number of openings, the profile family and finish, whether the wall build-up has to be corrected, and whether we’re matching existing trim or replacing it throughout a room. On impact work, the opening size and the number of units move the number more than anything else.

Every quote is line-item, upfront pricing with no surprises. The number you see is the number you pay. We pull the permits and pass the inspections, and all work is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right. Project pricing is eligible for $1,000 off projects over $10,000, and 0% financing for 18 months is available.

DIY or Call Us?

There’s a safe half and an unsafe half here, and it’s worth being straight about which is which.

What you can check yourself: photograph the profile label, measure the reveal and the wall thickness, and note exactly when the symptom appears (only in rain, only in summer, only on one side of the house). That information alone saves us a diagnostic visit and gets you a faster accurate quote.

Where DIY goes wrong: exterior window and door removal in The Hammocks is not a trim swap. The opening is part of the building envelope, and South Florida wind loads and water intrusion requirements mean the install has to be flashed and sealed correctly or you trade a dragging door for a mold remediation. On any exterior opening, we recommend a trained professional. The fastening schedule, the flashing sequence, and the inspection requirements aren’t things to learn on the fly on a hurricane-rated wall.

Call (844) 761-9356 and we’ll tell you over the phone whether you’re looking at a component fix or a replacement. A live person answers, 24/7. Our technicians have up to 12 years of experience, and they arrive background-checked and in uniform, so the person at your door is the person on the quote.

FAQs

How long should Schluter window and door components last in Florida? Interior trim profiles typically hold up for 10 to 15 years, but exterior sealing components around window and door openings often fail in 5 to 8 years in South Florida’s humidity and UV load. Coastal-adjacent wind-driven rain is the main stressor, so anything on an exposed elevation runs shorter.

Can a failed part be repaired instead of replaced? Often, yes. A sash balance, hinge, handle set, or trim profile is a component swap, and that’s a fraction of a full window or door replacement. Sealed glass units that have fogged are the exception; those need the unit replaced, not repaired. Call (844) 761-9356 for an exact quote.

How long does the swap take? A single component repair like a sash balance or hinge set is usually completed in a single visit. A window or door replacement depends on the number of openings and permit timing. We’ll give you a realistic schedule in writing, not a best-case guess.

How do you source the part? We identify the profile family and dimension code from your photo or the packaging label, then source the matching Schluter-compatible component through verified supply channels. We don’t carry stock in a truck or a local warehouse; we order the right part for your opening, which is why the label photo matters. Same-week turnaround is common for standard profiles. Call (844) 761-9356 to get started. Estimates are free.

We also work with KraftMaid, Cambria, and Silestone on the interior side of The Hammocks homes, so if a window or door project turns into a broader room update, we can handle it from foundation to finish line. Call Groundwork Construction Co. of The Hammocks at (844) 761-9356 to schedule your free estimate. Calls are answered by a live person, 24/7, and we’ll walk you through exactly what your Schluter component needs before we ever talk numbers.

Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 761-9356
Local Service Coverage

Request a Free Estimate in The Hammocks

Tell us what you need - Groundwork Construction Co. of The Hammocks responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch