Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Roofing: The The Hammocks Owner’s Guide
Schluter is a name most The Hammocks homeowners meet through tile work: the company’s shower systems, membranes and trim profiles are everywhere in Florida bathrooms. On a roof, Schluter components turn up in specific places – under tile roof systems, at tile-to-wall transitions, and around penetrations where a waterproofing layer has to survive sun, rain and wind-driven moisture. If a Schluter detail on your roof has failed, the symptom usually shows up as a stain on a ceiling, a soft spot at the roof edge, or water tracking down a wall after heavy summer rain. Installed repair work in The Hammocks runs roughly $400 to $2,500 for localized tile roof repair through $8,000 to $20,000 for a full roof replacement when the failure has spread.
Which Schluter Models This Applies To
Schluter’s system isn’t a “model line” the way a shingle product is. It’s a family of profiles, membranes and substrates. For roofing and tile-roof work, the components The Hammocks owners most often ask about are the waterproofing membranes and the edge and transition profiles that sit beneath or alongside tile. Identifying exactly what’s on your roof matters, because a membrane spec meant for a shower pan has no business under a tile roof in South Florida sun.
Here’s how to figure out what you’re dealing with. Look for the OEM printing on the membrane roll or the profile edge – Schluter stamps product names and dimensions directly on the material, and most failures we inspect still show legible labeling once the tile and mortar are lifted. Measure the profile depth and width in millimeters; its dimensions identify the series. If the label is gone, the install pattern and tile thickness tell us which system was intended.
For Schluter work, we lean toward genuine OEM components rather than generic equivalents. Reason: the membrane-to-profile fit is engineered as a system, and a knockoff profile that’s a millimeter off can let water past a seam that would otherwise hold. We don’t stock parts and we don’t carry them on a truck. We source what your roof actually calls for after we’ve opened it up and confirmed the spec. One note: Groundwork Construction Co. of The Hammocks is an independent service provider and is not affiliated with Schluter.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Roofing Is Failing
- Ceiling stains after heavy rain. Water is getting past the membrane at a seam or termination. This is often the first visible sign, and by the time you see it, moisture has usually been moving for a few seasons.
- Lifted or cracked tile at a transition. The profile beneath has shifted or the bond has failed, letting the tile above rock. Wind-driven rain at The Hammocks roof pitches finds those gaps fast.
- Soft or spongy decking near the roof edge. Moisture has reached the substrate below the waterproofing. This calls for opening the assembly, not a surface patch.
- Peeling or bubbling membrane visible at a detail. UV exposure and Florida heat degrade the exposed edge of a membrane that wasn’t properly protected or terminated. Once it bubbles, it’s holding water instead of shedding it.
- Persistent damp smell in an attic or vaulted ceiling cavity. This points to slow, hidden moisture rather than an active leak, and it’s the failure mode most often missed until the decking is compromised.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
What you’ll pay in The Hammocks depends on how much of the assembly has to come up and what spec the replacement needs.
| Scope | Installed Range |
|---|---|
| Localized tile roof repair (profile or membrane at a single detail) | $600 – $2,500 |
| General roof repair (membrane seam, transition, penetration) | $400 – $1,800 |
| Full roof replacement when waterproofing failure is widespread | $8,000 – $20,000 |
What moves the number: how many square feet of assembly has to be opened, whether decking is sound or needs replacing, and whether the existing tile can be reused. We quote parts and labor line by line so you see where the money goes. Every job comes with our 730-Day Done Right Promise – if it’s not done right, we make it right. Pricing is upfront; the number you see is the number you pay, and there are no change-order surprises after the roof is open.
DIY or Call Us?
There’s a safe half and an unsafe half to this. You can inspect from the ground with binoculars, check your attic for staining and dampness, and photograph any lifted tile or exposed membrane edge from a window or ladder base. That’s useful information and it costs nothing.
Where it goes wrong: roofing work at height, opening a waterproofing assembly, and re-establishing a watertight membrane are not homeowner jobs. A roof is a fall hazard, and a membrane detail that looks right but isn’t can leak for months before you notice. We’d rather you not risk a fall, and we’d rather the repair hold the first time. If you’ve spotted any of the symptoms above, call us at (844) 761-9356 for a free estimate. A live person answers, 24/7.
FAQs
How long does Schluter roofing last in The Hammocks? A properly installed membrane system under tile can last 20 to 30 years, but South Florida’s UV load and summer rain shorten the life of any detail that’s exposed or poorly terminated. Lifespan hinges on installation quality, not the product alone. Call (844) 761-9356 for an exact quote – estimates are free.
Can my Schluter roofing be repaired instead of replaced? Often yes. If the failure is localized to one transition or penetration and the surrounding membrane is sound, a targeted repair is the right call. If moisture has spread to decking or multiple seams, replacement is the honest answer. We assess before we recommend. Call (844) 761-9356 for an exact quote – estimates are free.
How long does the swap take? A localized repair is usually a day or less. Opening and replacing a larger section of assembly typically runs one to three days depending on access and decking condition. Most repairs are completed in a single visit. Call (844) 761-9356 for an exact quote – estimates are free.
How do you source the Schluter part? We confirm the exact product spec off the labeling and dimensions after opening the assembly, then source the genuine OEM component to match. We don’t stock parts and don’t carry them on a truck, so we order what your roof actually requires. Call (844) 761-9356 for an exact quote – estimates are free.
We also work with KraftMaid, Cambria, and Silestone on the interior side of the same homes we roof.
Groundwork Construction Co. of The Hammocks brings background-checked, uniformed technicians to every job, and our technicians have up to 12 years of experience. We’ve been proudly serving local communities since 2014, and we stand behind the work with the 730-Day Done Right Promise. Roofing is one of seven service lines we run, so from foundation to finish line, you’re dealing with one contractor who answers the phone. Call (844) 761-9356 for a free estimate and design consult, and ask about 0% financing for 18 months plus $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.