A Groundwork company - serving The Hammocks, FL

KraftMaid Windows & Doors in The Hammocks, FL

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Windows & Doors: The The Hammocks Owner’s Guide

KraftMaid makes cabinetry, not windows or doors. If you’re searching for KraftMaid window and door parts, you’re almost certainly looking at hardware on a KraftMaid cabinet or built-in that sits beside or around a window or patio door, and the part that failed is that hardware, not the glass. In The Hammocks, replacing or rehanging these pieces typically runs $150 to $600 installed for hardware alone, while full window or door replacement around a KraftMaid install runs $4,500 to $25,000 depending on impact rating. We serve The Hammocks as an independent construction company and are not affiliated with KraftMaid.

Call (844) 761-9356

Owners in The Hammocks usually find out something’s wrong the same way: a drawer beside a patio door starts dragging on the frame, a cabinet door near a window won’t stay shut in the humidity, or the hardware on a built-in has rusted enough that the latch no longer catches. Our technicians have up to 12 years of experience sorting out which piece failed and why the Florida climate made it fail early.

Key Takeaways

  • KraftMaid manufactures cabinets and built-ins, not windows or doors; the failed part is hardware or trim adjacent to them.
  • Installed hardware replacement near The Hammocks typically runs $150 to $600; impact window or door replacement runs $4,500 to $25,000.
  • Salt air and year-round humidity along this stretch of Miami-Dade is the leading cause of premature hardware failure.
  • We don’t stock parts. We source the correct replacement and install it, backed by the 730-Day Done Right Promise.

Which KraftMaid Models This Applies To

KraftMaid uses a few internal lines, and the part you need depends on which one you have. The series name and finish code are printed on a label inside the cabinet box, on the back of a door, or on the underside of a drawer. Look for a line like “KraftMaid” followed by a finish code and, often, a door style name. That label is the single most useful thing you can photograph before calling anyone.

The compatibility gotcha most The Hammocks owners run into: hinge and slide part numbers changed across KraftMaid’s production runs, and a hinge that looks identical to the one in your kitchen may have a different mounting plate spacing by a couple of millimeters. That’s enough to make a new door bind or a drawer sit crooked. Measure your existing hinge cup diameter and plate hole spacing before ordering, or you’ll be making a second trip.

On the OEM-versus-aftermarket question: for concealed hinges and drawer slides, aftermarket equivalents are widely available, often cheaper, and functionally identical when the specs match. For anything with a visible finish that has to match a KraftMaid door color or a decorative pull, an exact OEM match pays for itself. We don’t claim to stock KraftMaid parts, and no one carries them on a truck. We source the correct part and install it correctly.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Windows & Doors Is Failing

  • A door won’t stay closed near a window. Humidity swells the door, the window frame shifts slightly with temperature, and the hinge adjustment drifts. A cabinet door that worked in January often stops latching by August.
  • Rust or white chalky corrosion on hardware. Salt-laden air along this part of Miami-Dade eats through thin decorative finishes fast. Once you see surface corrosion, the plating is gone and the base metal is next.
  • Drawer slides that grab or squeal. The lubricant in a slide breaks down in heat. Early on it’s a nuisance; left alone, the rollers flatten and the drawer starts dragging on the carcass.
  • Water staining or dark streaks on a cabinet face beside a patio door. That’s the real alarm. It means the window or door seal is letting water in, not the cabinet. Replacing hardware won’t fix it, and waiting makes it worse.
  • A door that rubs or hits the frame it never touched before. Usually the door has warped slightly, or the hinge plate screws have backed out of the wood. Both are fixable, and both get worse if ignored.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Hardware replacement and rehanging on KraftMaid built-ins near The Hammocks typically runs $150 to $600 installed, depending on how many pieces are involved and whether a visible finish has to match. Full window replacement in The Hammocks runs $4,500 to $15,000, and impact window installation runs $8,000 to $25,000, since impact-rated units are required on most openings this far south.

What drives the range: the number of hinges or slides, whether the finish has to be ordered, and whether the window or door itself is the problem. We quote upfront pricing with no surprises, so the number you see is the number you pay. Every job carries the 730-Day Done Right Promise, and a free estimate and design consult puts the actual range in writing before anyone touches a screwdriver.

Work Installed Range in The Hammocks
KraftMaid hardware replacement / rehang $150 – $600
Window replacement $4,500 – $15,000
Impact window installation $8,000 – $25,000

DIY or Call Us?

You can safely check a few things yourself: photograph the label inside the cabinet box, measure the hinge cup and plate hole spacing, and inspect hardware for rust or looseness. Those are the details that save you money on the repair.

Where DIY goes wrong: matching a slide or hinge by eye rather than by spec, then forcing it, then cracking the door or stripping the screw holes in the carcass. Once a screw hole is wallowed out, the fix becomes a small carpentry repair, not a parts swap. And if the symptom is water staining beside a window or patio door, this isn’t a hardware problem at all, and it’s a genuinely bad one to ignore. Call (844) 761-9356 and we’ll sort out what actually failed.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 761-9356
Local Service Coverage

Request a Free Estimate in The Hammocks

Tell us what you need - Groundwork Construction Co. of The Hammocks responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch