Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The The Hammocks Owner’s Guide
If you’re searching for KraftMaid parts in The Hammocks, you almost certainly have a door that won’t stay shut, a drawer glider that sticks, or a hinge that’s stripped its screw holes in a powder room vanity you assumed would outlast the house. We install and repair KraftMaid bathroom cabinetry across The Hammocks, and a full bathroom remodel runs $9,000 – $28,000. But most of the calls we get here aren’t remodel calls at all. They’re part calls. A shop-at-home vanity from KraftMaid’s Brookhill or Colinas series is built to hold up in a bathroom’s humidity – until the hinge cup starts ovaling out at year eight, or the soft-close damper dies and every door in the water closet bangs at 2 a.m.
Key Takeaways
- KraftMaid bathroom parts are series-specific. The part number on your warranty card beats a photo every time.
- Most single-part fixes in a The Hammocks bath are a same-week job, not a full gut.
- FL humidity is the real enemy: it’s not the door that fails first, it’s the hinge plate and the finish edge.
- 0% financing for 18 months and $1,000 off projects over $10,000 are standing on any Groundwork project, including cabinet-only work.
Which KraftMaid Models This Applies To
KraftMaid builds bathroom cabinetry under several umbrella lines – Brookhill, Colinas, and the older Reflections series that a lot of The Hammocks homes from the early 2000s were built with. The part you need lives or dies on three identifiers: the series name, the door style, and the actual measured door or drawer thickness. KraftMaid doors vary between roughly 3/4″ to 1″ thick depending on series and style, and a hinge sized for one won’t seat in the other. Before you order anything, empty the cabinet and look for the spec label stuck to the inside of a side panel or the back of a drawer box. That label carries the model and finish code, which is what a parts desk needs.
Here’s the OEM-versus-aftermarket call we make on KraftMaid specifically: for hinges, drawer glides, and shelf clips, a quality aftermarket equivalent (Blum, Grass) is often a better part than the original and costs less. For door and drawer fronts, go OEM every time. Finish matching on a painted or glazed KraftMaid door is the one thing aftermarket can’t fake, and a mismatched door on a small vanity is impossible to unsee. We’re an independent service provider and not affiliated with KraftMaid, which means we’re not locked into their catalog – we source what actually fits your cabinet and lasts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Bathroom Remodeling Is Failing
In The Hammocks, bathroom cabinetry fails on a predictable schedule because of our humidity and the fact that most vanities sit near a shower. Here’s what the failure actually looks like and what’s causing it:
- Doors sagging or rubbing the frame. The hinge plate has loosened in the cabinet side because moisture swelled the particleboard core around the screw holes. Replacing the hinge without addressing the swollen hole just repeats the failure in a year.
- Soft-close doors that slam. The damper inside an integrated soft-close hinge has failed – it’s the first part to go in a humid bath, usually somewhere past year six. A hinge swap fixes it; the door itself is fine.
- Drawer gliders that stick or pull hard. Undermount glides collect hair, soap scum, and mineral dust, then the ball bearings wear unevenly. Sometimes it’s a cleaning and re-seat, sometimes it’s a new glide.
- Finish edge peeling or “cupping” on the door bottom. Water wicks up the bottom edge of a door from a wet floor or a leaking supply line. This is the FL-weather failure – a door that looks perfect except for the bottom 1/4″.
- Cabinet box separating at the seams. The glue joint has failed after repeated wet-dry cycles. This is the one that usually tips a part repair into a full vanity replacement, because a failing box won’t hold new hardware.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Most KraftMaid bathroom cabinet repairs in The Hammocks land on the low end, because they’re parts plus a service call. Here’s how the range splits on our projects:
| Scope | Installed Price Range |
|---|---|
| Hinge, glide, or shelf clip replacement (hardware only) | $150 – $450 per cabinet |
| Door or drawer front replacement (matched, OEM) | $200 – $600 per door |
| Bathroom vanity installation or full vanity swap | $800 – $3,000 |
| Full bathroom remodel with KraftMaid cabinetry | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
What drives you toward the top of the range: door-front work on a discontinued Glazed finish line, a vanity box that’s swollen at the seams, or a bathroom where the cabinet failure traces back to a leak you didn’t know you had. Every number we quote is upfront and the price doesn’t move after the work starts. Our technicians have up to 12 years of experience across cabinet work, and the labor is backed by our 730-Day Done Right Promise – if it’s not right, we make it right. We don’t carry parts on a truck; we source the exact part against your model label and return to install it.
DIY or Call Us?
Some of this you can safely do yourself, and we’d rather tell you which. Pop off a hinge with a screwdriver and match it against a new one? Fine. Re-tension a soft-close setting on an adjustable damper? Go ahead. Pull a shelf clip and reorder a match from the label? That’s a five-minute job. What you shouldn’t DIY is anything involving a cabinet side that’s swollen at the screw holes, a door that needs a matched finish, or a cabinet box that’s separating. Over-drilling a swollen hole for a bigger screw is a common mistake – it turns a $40 hinge fix into a $900 vanity replacement. And if the leak behind the vanity is what started all this, that’s not a cabinet job at all. Call (844) 761-9356 and we’ll sort out what’s parts, what’s installation, and what’s plumbing.
FAQs
How long should KraftMaid bathroom cabinet hardware last in The Hammocks? In a conditioned bath, hinges and glides run 8 to 12 years before a soft-close damper fails. In The Hammocks, the humidity and proximity of most vanities to a shower pull that down toward the lower end – figure 6 to 10 years before the first hardware swap.
Can it be repaired instead of replaced? Usually yes for hardware – hinges, glides, and shelf clips are repairable or replaceable without touching the cabinet. Door and drawer fronts are replaceable if the finish is still in production. A cabinet box that’s separating at the seams under moisture is the point where replacement is the honest answer. Call (844) 761-9356 for an exact quote – the estimate is free.
How long does the swap take? Hardware on a single vanilla runs under an hour. A matched door or drawer front is a return-visit job once the part is sourced – typically the same week. A full vanity swap depends on plumbing and tile, so plan on a day or two rather than a single visit.
How do you source the part? We read the spec label in your cabinet, match model, series, and finish code against the KraftMaid catalog, and bring the part to you. We don’t stock KraftMaid parts and we don’t guess against a photo – the label is what gets you the right door.
When your The Hammocks bathroom needs cabinetry that holds up to our climate, Groundwork Construction Co. handles it from a single hinge to a full KraftMaid vanity and tile package – Kohler fixtures and Silestone or Cambria tops alongside it when you want the whole bath brought current. Upfront pricing, live person on the phone 24/7, and the 730-Day Done Right Promise behind every job. Call (844) 761-9356 for a free estimate and design consult.
Written by the team at Groundwork Construction Co. of The Hammocks, serving The Hammocks and nearby areas.