Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Sunset, FL
We provide independent Jerith service across Sunset, FL, for homeowners who want their aluminum or vinyl fence repaired or installed to Miami-Dade code. The difference here is permitting: because Sunset is unincorporated, your fence project runs through Miami-Dade County’s UMS, and wind-load engineering is required before a single post goes in. We build that step into every Sunset quote. Call (844) 761-9356 for a free estimate.
Why Sunset Residents Choose Us for Jerith Service
Jerith is one of the most common fence brands on Sunset blocks, and we’ve worked on their systems long enough to know how each series ages in this climate. The Signature Series aluminum holds its finish well but collects corrosion at the post bases when water pools. Vinyl Privacy panels look sharp for years on the shaded side of a house and chalk fast on the west-facing side. We’ve seen both patterns repeat across Sunset.
Our technicians have up to 12 years of experience, and that matters more with a brand that has real OEM part numbers behind every bracket, hinge and post cap. We source those parts by number rather than guessing at a fit. Calls are answered by a live person 24/7, so when a gate sags into the driveway before a work week, you’re not leaving a message and waiting.
Every Jerith job we run in Sunset is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Solve in Sunset
- Post-base corrosion after standing water. Sunset’s flat terrain and low elevation mean heavy summer rain has nowhere to go. Water sits against aluminum footings, and that’s where pitting and rust staining start. We excavate, rebuild the footing with drainage, and replace the corroded brackets.
- Vinyl fading and chalking on sun-facing runs. Intense UV plus year-round humidity wears the surface of Jerith Vinyl Privacy panels. South- and west-facing sections take the worst of it. We replace affected panels rather than the whole run.
- Gate sag from soil saturation and root intrusion. Saturated soil and nearby ficus roots move posts just enough to pop hinge screws and drop a gate. We reset the post, refit the hinges, and check the latch alignment before we leave.
- Hurricane-season impact damage. From August through October, flying debris bends aluminum pickets and cracks vinyl panels. Isolated damage is a repair, not a replacement, and we quote it that way.
- Undersized footings that fail wind-load review. Many Sunset fences were set shallow. When posts wobble, the footing is usually the reason, and it’s also the line item a county reviewer will flag.
Jerith Service in Sunset: What Local Conditions Mean for Your Equipment
Sunset’s unincorporated status is the fact that shapes every Jerith fence project here. There’s no city hall to walk into with a fence plan. Permits and inspections go through Miami-Dade County’s Unincorporated Municipal Services, and UMS requires wind-load engineering on all fence installations. That engineering review typically adds two to three weeks before installation can start. Out-of-area contractors routinely skip it, quote a fast install date, then stall when the county asks for stamped drawings. In a ZIP like 33173, where the housing stock runs from the 1950s through the 1970s with plenty of carports and original single-pane windows, lots of fencing is original to the house and due for replacement. That backlog is exactly why the permitting step catches so many Sunset homeowners off guard. We build the UMS timeline into your schedule from the first estimate, so the install date you get is one the county will actually allow.
Jerith Models & Products We Service in Sunset
We work on the four Jerith lines Sunset homeowners ask about most: Signature Series aluminum, Commercial Grade aluminum, Infinity Series aluminum, and Vinyl Privacy. Each has its own part catalog and its own weak points. For critical components like brackets, hinges, post caps and latch hardware, we source OEM Jerith parts so fit and finish match what’s already on the fence. When a specific part is backordered, we use high-grade aftermarket pickets and panels and tell you plainly which is which. We don’t claim local stock; parts are sourced per job against the model you have. For a closer look at how we handle the brand, see our Jerith service overview.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Sunset
Upfront pricing, no surprises. These are the ranges Sunset homeowners see most often:
| Service | Typical Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Fence Repair | $400 – $1,800 |
Cost is driven by linear footage, fence height, gate count, how many posts need new footings, and whether the county’s wind-load engineering adds drawing revisions. A free estimate includes a site walk, a measurement, a check of existing footings, a line-item quote, and a plain answer on repair versus replace. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available. Call (844) 761-9356 for an exact quote, estimates are free.
Serving Sunset, FL – Our Local Coverage Area
We serve Sunset and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Sunset
Yes. Because Sunset is unincorporated, your Jerith fence permit goes through Miami-Dade County’s UMS, and wind-load engineering is required for the installation. That applies to new fences and to repairs that change structure, like resetting footings. Call (844) 761-9356 and we’ll walk you through what your specific project needs.
Start with drainage at the post bases, since standing water is what drives corrosion on aluminum in Sunset. Keep soil and mulch from mounding against the posts, and address small rust spots before they spread. Call (844) 761-9356 for an inspection if you’re seeing staining at the footings.
In most cases you can replace just the damaged panels. We recommend repair over replacement when damage is isolated to a few cracked panels or bent pickets, and we’ll say so even when a full replacement would pay us more. Call (844) 761-9356 for a quote on the panels you actually need.
Aluminum fence installation in Sunset typically runs $4,000 – $10,000, and vinyl runs $3,500 – $9,000. Height, footage, gate count and footing work move the number. Call (844) 761-9356 for an exact quote, estimates are free.
Expect the wind-load engineering and UMS review to add roughly two to three weeks to your timeline before installation begins. Plan for it and the schedule holds. Call (844) 761-9356 and we’ll map the permitting steps for your property.
Service Areas Near Sunset
We work Jerith fences across Sunset and the surrounding communities, including The Hammocks, Kendall West, Country Walk, The Crossings, Kendale Lakes and Three Lakes. If you’re just outside those lines, we also cover Westwood Lakes and Kendall for the same aluminum, vinyl and repair work. See the full Sunset service area for coverage details.
Book Your Jerith Service in Sunset Today
Whether your gate is sagging, your panels are chalking, or you’re ready for a code-compliant new run, call (844) 761-9356. A live person answers around the clock, and we’ll schedule your free estimate and design consult at a time that works. Most repairs are finished in a single visit.
Written by the team at Groundwork Construction Co.